[Wed Nov 30 17:45:58 2011] Detection parameters:
  Position = (295.6, 433.9) = 12 3 11.90 44 40 3.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.9 +/- 17.7
  Background counts = 98.0
  Rate = 0.004 +/- 0.0009

[Wed Nov 30 17:45:59 2011] Off-axis axis estimate = 9.82'
[Wed Nov 30 17:46:18 2011] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 17:46:18 2011] Initial guess for spatial extent in simple fitting = 11.34"
[Wed Nov 30 17:46:18 2011] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.932
[Wed Nov 30 17:46:18 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 11.34"
[Wed Nov 30 17:46:18 2011] fullrun_mos2_xmm0606322101_pi300-10000_cl_pass0_src10.ximg exists
[Wed Nov 30 17:46:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0606322101_pi300-10000_cl_pass0_src10.csv
[Wed Nov 30 17:46:18 2011] fullrun_mos2_xmm0606322101_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed Nov 30 17:46:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0606322101_pi300-10000_cl_pass0_src10.csv
[Wed Nov 30 17:46:18 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0606322101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0606322101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 17:46:19 2011] fullrun_mos2_xmm0606322101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed Nov 30 17:46:19 2011] fullrun_mos2_xmm0606322101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Nov 30 17:46:19 2011] Fit fullrun_mos2_xmm0606322101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Wed Nov 30 17:46:29 2011] Spatial fit model total counts = 292.998000, observed total counts = 293.000000
[Wed Nov 30 17:46:29 2011] Offset between fit and detection position for source 10 = 1.485047 pixels
[Wed Nov 30 17:46:29 2011] 288.052100 total counts/ 232.766000 bgd. counts: snr = 3.623733
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.485047 pixels
  Position = (294.3, 434.7) = 12 3 12.42 44 40 4.6
  Extent = 7.0 (3.9-9.5)", rotation angle = 0
  Source counts = 55.3 +/- 17.0
  Background counts = 232.8
  Rate = 0.002 +/- 0.0007
[Wed Nov 30 17:46:29 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 17:46:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 17:46:29 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 17:46:29 2011] Source does appear to be extended
[Wed Nov 30 17:46:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 17:46:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Nov 30 17:46:40 2011] Initial guess for spatial extent in simple fitting = 7.02"
[Wed Nov 30 17:46:40 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.895
[Wed Nov 30 17:46:40 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 7.02"
[Wed Nov 30 17:46:41 2011] fullrun_mos2_xmm0606322101_pi300-10000_cl_pass1_src10.ximg exists
[Wed Nov 30 17:46:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0606322101_pi300-10000_cl_pass1_src10.csv
[Wed Nov 30 17:46:41 2011] fullrun_mos2_xmm0606322101_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed Nov 30 17:46:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0606322101_pi300-10000_cl_pass1_src10.csv
[Wed Nov 30 17:46:41 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0606322101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0606322101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 17:46:41 2011] fullrun_mos2_xmm0606322101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed Nov 30 17:46:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0606322101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Wed Nov 30 17:46:41 2011] fullrun_mos2_xmm0606322101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Nov 30 17:46:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0606322101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Wed Nov 30 17:46:41 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0606322101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0606322101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 17:46:53 2011] Warning, spatial fit 10 centroid is now closest to src. 14
[Wed Nov 30 17:46:53 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 17:46:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 17:46:53 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 17:46:53 2011] Source does appear to be extended
[Wed Nov 30 17:46:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 17:47:20 2011] XMMSAS src. selection expression = ellipse(25559.051800, 37766.302200, 421.168212, 421.168212, 0.000000, X, Y)
[Wed Nov 30 17:47:20 2011] Not overwriting source region fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src10_src.reg
[Wed Nov 30 17:47:20 2011] Extracting stamp from image fullrun_mos2_xmm0606322101_pi300-10000_cl_sm2.00.img.gz, (270, 410) - (319, 459)
[Wed Nov 30 17:47:20 2011] XMMSAS bgd. selection expression = annulus(25559.051800, 37766.302200, 701.947020, 1403.894040, X, Y)
[Wed Nov 30 17:47:20 2011] Writing fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src10.gif
[Wed Nov 30 17:47:20 2011] ../../xmm0606322101/products/events/fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0606322101/products/events/fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create
[Wed Nov 30 17:47:20 2011] Mean detx,y = (-3648.10, 9163.70) 
[Wed Nov 30 17:47:20 2011] ../../xmm0606322101/products/images/fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src10_src.img and ../../xmm0606322101/products/images/fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create
[Wed Nov 30 17:47:20 2011] ../../xmm0606322101/products/spectra/fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src10_src_b10.pi.gz and ../../xmm0606322101/products/spectra/fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create
[Wed Nov 30 17:47:20 2011] Setting source spectrum file to fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Nov 30 17:47:20 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed Nov 30 17:47:20 2011] ../../xmm0606322101/products/lightcurves/fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0606322101/products/lightcurves/fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create
[Wed Nov 30 17:47:24 2011] Not generating rmf since there are only 55 counts
[Wed Nov 30 17:47:24 2011] rmf not generated due to insufficient counts
[Wed Nov 30 17:47:24 2011] fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src10.arf exists, delete to re-create
[Wed Nov 30 17:48:01 2011] Updating aperture counts using extracted products
[Wed Nov 30 17:48:01 2011] Error reading totcts from fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Nov 30 17:48:02 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 17:48:02 2011] Using photon index=1.80, rate=0.00225, arf fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src10.arf
[Wed Nov 30 17:48:02 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 17:48:02 2011] Updating source flux to 5e-14
[Wed Nov 30 17:48:04 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting