[Wed Nov 30 17:45:58 2011] Detection parameters:
  Position = (301.6, 321.7) = 12 3 9.45 44 31 52.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 26780.8 +/- 193.1
  Background counts = 113.0
  Rate = 0.7 +/- 0.005

[Wed Nov 30 17:45:59 2011] Off-axis axis estimate = 1.70'
[Wed Nov 30 17:46:18 2011] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 17:46:18 2011] Initial guess for spatial extent in simple fitting = 7.28"
[Wed Nov 30 17:46:18 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.058
[Wed Nov 30 17:46:18 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Wed Nov 30 17:46:18 2011] fullrun_mos2_xmm0606322101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Nov 30 17:46:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0606322101_pi300-10000_cl_pass0_src1.csv
[Wed Nov 30 17:46:18 2011] fullrun_mos2_xmm0606322101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Nov 30 17:46:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0606322101_pi300-10000_cl_pass0_src1.csv
[Wed Nov 30 17:46:18 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0606322101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0606322101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 17:46:18 2011] fullrun_mos2_xmm0606322101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Nov 30 17:46:18 2011] fullrun_mos2_xmm0606322101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Nov 30 17:46:18 2011] Fit fullrun_mos2_xmm0606322101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Nov 30 17:46:29 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.126718 pixels away
[Wed Nov 30 17:46:29 2011] Source 1 is offset by 0.094230 and -4.225777 pixels which is larger than
2 X fitted extent = 3.361002 x 3.361002, not incorporating fit results
[Wed Nov 30 17:46:29 2011] Spatial fit model total counts = 2682.890000, observed total counts = 2803.000000
[Wed Nov 30 17:46:29 2011] Offset between fit and detection position for source 1 = 2.397775 pixels
[Wed Nov 30 17:46:29 2011] Warning, changing simple spatial fit ID from 1 to 11
[Wed Nov 30 17:46:29 2011] 2549.062000 total counts/ 523.562000 bgd. counts: snr = 88.521383
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.397775 pixels
  Position = (304.0, 322.0) = 12 3 8.48 44 31 54.7
  Extent = 5.5 (5.4-5.7)", rotation angle = 0
  Source counts = 2025.5 +/- 50.5
  Background counts = 523.6
  Rate = 0.08 +/- 0.002
[Wed Nov 30 17:46:29 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 17:46:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 17:46:29 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 17:46:29 2011] Source does appear to be extended
[Wed Nov 30 17:46:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 17:46:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Nov 30 17:46:40 2011] Initial guess for spatial extent in simple fitting = 5.53"
[Wed Nov 30 17:46:40 2011] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.274
[Wed Nov 30 17:46:40 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.53"
[Wed Nov 30 17:46:40 2011] fullrun_mos2_xmm0606322101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Nov 30 17:46:40 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0606322101_pi300-10000_cl_pass1_src1.csv
[Wed Nov 30 17:46:40 2011] fullrun_mos2_xmm0606322101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Nov 30 17:46:40 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0606322101_pi300-10000_cl_pass1_src1.csv
[Wed Nov 30 17:46:40 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0606322101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0606322101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 17:46:41 2011] fullrun_mos2_xmm0606322101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Nov 30 17:46:41 2011] fullrun_mos2_xmm0606322101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Nov 30 17:46:41 2011] Fit fullrun_mos2_xmm0606322101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Nov 30 17:46:53 2011] Source 1 is offset by 2.489195 and 0.444294 pixels which is larger than
2 X fitted extent = 2.440285 x 2.440285, not incorporating fit results
[Wed Nov 30 17:46:53 2011] Source 1 is offset by 2.472345 and -3.906943 pixels which is larger than
2 X fitted extent = 3.355002 x 3.355002, not incorporating fit results
[Wed Nov 30 17:46:53 2011] Spatial fit model total counts = 2682.350000, observed total counts = 2803.000000
[Wed Nov 30 17:46:53 2011] Offset between fit and detection position for source 1 = 0.000000 pixels
[Wed Nov 30 17:46:53 2011] Warning, changing simple spatial fit ID from 1 to 11
[Wed Nov 30 17:46:53 2011] 2545.235000 total counts/ 516.195000 bgd. counts: snr = 89.306632
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000000 pixels
  Position = (304.0, 322.0) = 12 3 8.48 44 31 54.7
  Extent = 5.5 (5.4-5.7)", rotation angle = 0
  Source counts = 2029.0 +/- 50.5
  Background counts = 516.2
  Rate = 0.08 +/- 0.002
[Wed Nov 30 17:46:53 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 17:46:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 17:46:53 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 17:46:53 2011] Source does appear to be extended
[Wed Nov 30 17:46:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 17:47:19 2011] Counts = 2029.040000, rescaling region sizes by 2.000000
[Wed Nov 30 17:47:19 2011] XMMSAS src. selection expression = ellipse(26400.760000, 27966.760000, 659.773219, 659.773219, 0.000000, X, Y)
[Wed Nov 30 17:47:19 2011] Not overwriting source region fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src1_src.reg
[Wed Nov 30 17:47:19 2011] Extracting stamp from image fullrun_mos2_xmm0606322101_pi300-10000_cl_sm2.00.img.gz, (266, 284) - (342, 360)
[Wed Nov 30 17:47:19 2011] XMMSAS bgd. selection expression = annulus(26400.760000, 27966.760000, 2199.244063, 4398.488127, X, Y) && !ellipse(26764.993988, 28841.144592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27175.148224, 27796.098511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27051.994690, 28478.470245, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Nov 30 17:47:19 2011] Writing fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src1.gif
[Wed Nov 30 17:47:20 2011] ../../xmm0606322101/products/events/fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0606322101/products/events/fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Nov 30 17:47:20 2011] Mean detx,y = (56.81, 57.28) 
[Wed Nov 30 17:47:20 2011] ../../xmm0606322101/products/images/fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src1_src.img and ../../xmm0606322101/products/images/fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Nov 30 17:47:20 2011] ../../xmm0606322101/products/spectra/fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0606322101/products/spectra/fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Nov 30 17:47:20 2011] Setting source spectrum file to fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Nov 30 17:47:20 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Nov 30 17:47:20 2011] ../../xmm0606322101/products/lightcurves/fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0606322101/products/lightcurves/fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Nov 30 17:47:24 2011] fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Wed Nov 30 17:47:24 2011] fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Wed Nov 30 17:48:01 2011] Updating aperture counts using extracted products
[Wed Nov 30 17:48:01 2011] Error reading totcts from fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Nov 30 17:48:02 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 17:48:02 2011] Using photon index=1.80, rate=0.0826, arf fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src1.arf
[Wed Nov 30 17:48:02 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 17:48:02 2011] Updating source flux to 9.1e-13
[Wed Nov 30 17:48:04 2011] Flag b found in src. 1 procflags, skipping spectral fitting
[Wed Nov 30 17:48:05 2011] Reading fit data from xmm0606322101/analysis//spectral/fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src1_pl.csv
[Wed Nov 30 17:48:05 2011] Spectral fit parameter nH value = 234950000000.0
[Wed Nov 30 17:48:05 2011] Spectral fit parameter PhoIndex value = 2.56414
[Wed Nov 30 17:48:05 2011] Failed to get F(0.3-8.0) from xmm0606322101/analysis//spectral/fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Nov 30 17:48:05 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 17:48:05 2011] Using Nh = 2.3e+11, photon index=2.56, rate=0.0826, arf fullrun_mos2_xmm0606322101_pi300-10000_pass1_cl_src1.arf
[Wed Nov 30 17:48:05 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 17:48:05 2011] Updating source flux to 7.3e-13