[Wed Nov 30 17:45:57 2011] Detection parameters:
  Position = (315.3, 324.9) = 12 3 3.88 44 32 10.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.3 +/- 14.9
  Background counts = 181.5
  Rate = 0.003 +/- 0.0006

[Wed Nov 30 17:45:57 2011] Off-axis axis estimate = 2.27'
[Wed Nov 30 17:46:17 2011] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 17:46:17 2011] Initial guess for spatial extent in simple fitting = 7.57"
[Wed Nov 30 17:46:17 2011] source mask rpix=1.7, npix_max = 20, mask sum = 14, frac = 0.698
[Wed Nov 30 17:46:17 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 7.57"
[Wed Nov 30 17:46:17 2011] fullrun_mos1_xmm0606322101_pi300-10000_cl_pass0_src11.ximg exists
[Wed Nov 30 17:46:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606322101_pi300-10000_cl_pass0_src11.csv
[Wed Nov 30 17:46:17 2011] fullrun_mos1_xmm0606322101_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Nov 30 17:46:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606322101_pi300-10000_cl_pass0_src11.csv
[Wed Nov 30 17:46:17 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606322101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606322101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 17:46:18 2011] fullrun_mos1_xmm0606322101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Nov 30 17:46:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606322101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed Nov 30 17:46:18 2011] fullrun_mos1_xmm0606322101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Nov 30 17:46:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606322101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed Nov 30 17:46:18 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606322101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606322101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 17:46:25 2011] Source 7 is offset by 7.263521 and 5.829012 pixels which is larger than
2 X fitted extent = 0.869582 x 0.869582, not incorporating fit results
[Wed Nov 30 17:46:25 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 17:46:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 17:46:25 2011] Assessing source extent using major
[Wed Nov 30 17:46:25 2011] Source does appear to be extended
[Wed Nov 30 17:46:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 17:46:39 2011] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 17:46:39 2011] Initial guess for spatial extent in simple fitting = 7.57"
[Wed Nov 30 17:46:39 2011] source mask rpix=1.7, npix_max = 20, mask sum = 14, frac = 0.698
[Wed Nov 30 17:46:39 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 7.57"
[Wed Nov 30 17:46:40 2011] fullrun_mos1_xmm0606322101_pi300-10000_cl_pass1_src11.ximg exists
[Wed Nov 30 17:46:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606322101_pi300-10000_cl_pass1_src11.csv
[Wed Nov 30 17:46:40 2011] fullrun_mos1_xmm0606322101_pi300-10000_cl_pass1_src11_1.ximg exists
[Wed Nov 30 17:46:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606322101_pi300-10000_cl_pass1_src11.csv
[Wed Nov 30 17:46:40 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606322101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606322101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 17:46:40 2011] fullrun_mos1_xmm0606322101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Wed Nov 30 17:46:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606322101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Wed Nov 30 17:46:40 2011] fullrun_mos1_xmm0606322101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Nov 30 17:46:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606322101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Wed Nov 30 17:46:40 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606322101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606322101_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 17:46:49 2011] Source 7 is offset by -6.649812 and -1.210213 pixels which is larger than
2 X fitted extent = 0.869582 x 0.869582, not incorporating fit results
[Wed Nov 30 17:46:49 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 17:46:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 17:46:49 2011] Assessing source extent using major
[Wed Nov 30 17:46:49 2011] Source does appear to be extended
[Wed Nov 30 17:46:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 17:47:16 2011] XMMSAS src. selection expression = ellipse(27383.196320, 28215.394012, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Nov 30 17:47:16 2011] Not overwriting source region fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src7_src.reg
[Wed Nov 30 17:47:16 2011] Extracting stamp from image fullrun_mos1_xmm0606322101_pi300-10000_cl_sm2.00.img.gz, (278, 287) - (353, 362)
[Wed Nov 30 17:47:16 2011] XMMSAS bgd. selection expression = annulus(27383.196320, 28215.394012, 1087.500000, 2175.000000, X, Y) && !ellipse(26183.952000, 27927.247200, 1280.076037, 1280.076037, 0.000000, X, Y)
[Wed Nov 30 17:47:16 2011] Writing fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src7.gif
[Wed Nov 30 17:47:17 2011] ../../xmm0606322101/products/events/fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src7_src.evt and ../../xmm0606322101/products/events/fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src7_bgd.evt exist, delete to re-create
[Wed Nov 30 17:47:17 2011] Mean detx,y = (57.83, 666.49) 
[Wed Nov 30 17:47:17 2011] ../../xmm0606322101/products/images/fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src7_src.img and ../../xmm0606322101/products/images/fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src7_bgd.img exist, delete to re-create
[Wed Nov 30 17:47:17 2011] ../../xmm0606322101/products/spectra/fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src7_src_b10.pi.gz and ../../xmm0606322101/products/spectra/fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src7_bgd.pi exist, delete to re-create
[Wed Nov 30 17:47:17 2011] Setting source spectrum file to fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Nov 30 17:47:17 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed Nov 30 17:47:17 2011] ../../xmm0606322101/products/lightcurves/fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src7_src.lc and ../../xmm0606322101/products/lightcurves/fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src7_bgd.lc exist, delete to re-create
[Wed Nov 30 17:47:19 2011] Not generating rmf since there are only 64 counts
[Wed Nov 30 17:47:19 2011] rmf not generated due to insufficient counts
[Wed Nov 30 17:47:19 2011] fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src7.arf exists, delete to re-create
[Wed Nov 30 17:48:00 2011] Updating aperture counts using extracted products
[Wed Nov 30 17:48:00 2011] Error reading totcts from fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Nov 30 17:48:01 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 17:48:01 2011] Using photon index=1.80, rate=0.00255, arf fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src7.arf
[Wed Nov 30 17:48:01 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 17:48:01 2011] Updating source flux to 2.9e-14
[Wed Nov 30 17:48:03 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting