[Wed Nov 30 17:45:56 2011] Detection parameters:
  Position = (301.7, 321.7) = 12 3 9.43 44 31 52.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 28375.9 +/- 201.7
  Background counts = 181.0
  Rate = 0.8 +/- 0.006

[Wed Nov 30 17:45:57 2011] Off-axis axis estimate = 1.70'
[Wed Nov 30 17:46:17 2011] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 17:46:17 2011] Initial guess for spatial extent in simple fitting = 7.28"
[Wed Nov 30 17:46:17 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Wed Nov 30 17:46:17 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Wed Nov 30 17:46:17 2011] fullrun_mos1_xmm0606322101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Nov 30 17:46:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606322101_pi300-10000_cl_pass0_src1.csv
[Wed Nov 30 17:46:17 2011] fullrun_mos1_xmm0606322101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Nov 30 17:46:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606322101_pi300-10000_cl_pass0_src1.csv
[Wed Nov 30 17:46:17 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606322101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606322101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 17:46:17 2011] fullrun_mos1_xmm0606322101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Nov 30 17:46:17 2011] fullrun_mos1_xmm0606322101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Nov 30 17:46:17 2011] Fit fullrun_mos1_xmm0606322101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Nov 30 17:46:25 2011] Spatial fit model total counts = 16078.000000, observed total counts = 16078.000000
[Wed Nov 30 17:46:25 2011] Offset between fit and detection position for source 1 = 0.220558 pixels
[Wed Nov 30 17:46:25 2011] 16088.290000 total counts/ 3650.890000 bgd. counts: snr = 205.840216
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.220558 pixels
  Position = (301.5, 321.6) = 12 3 9.49 44 31 52.7
  Extent = 5.3 (5.2-5.4)", rotation angle = 0
  Source counts = 12437.4 +/- 126.8
  Background counts = 3650.9
  Rate = 0.5 +/- 0.005
[Wed Nov 30 17:46:25 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 17:46:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 17:46:25 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 17:46:25 2011] Source does appear to be extended
[Wed Nov 30 17:46:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 17:46:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Nov 30 17:46:39 2011] Initial guess for spatial extent in simple fitting = 5.32"
[Wed Nov 30 17:46:39 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.758
[Wed Nov 30 17:46:39 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.32"
[Wed Nov 30 17:46:40 2011] fullrun_mos1_xmm0606322101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Nov 30 17:46:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606322101_pi300-10000_cl_pass1_src1.csv
[Wed Nov 30 17:46:40 2011] fullrun_mos1_xmm0606322101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Nov 30 17:46:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606322101_pi300-10000_cl_pass1_src1.csv
[Wed Nov 30 17:46:40 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606322101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606322101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 17:46:40 2011] fullrun_mos1_xmm0606322101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Nov 30 17:46:40 2011] fullrun_mos1_xmm0606322101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Nov 30 17:46:40 2011] Fit fullrun_mos1_xmm0606322101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Nov 30 17:46:49 2011] Spatial fit model total counts = 16132.100000, observed total counts = 16104.000000
[Wed Nov 30 17:46:49 2011] Offset between fit and detection position for source 1 = 0.011773 pixels
[Wed Nov 30 17:46:49 2011] 16206.090000 total counts/ 3708.890000 bgd. counts: snr = 205.206325
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.011773 pixels
  Position = (301.5, 321.6) = 12 3 9.49 44 31 52.7
  Extent = 5.3 (5.3-5.4)", rotation angle = 0
  Source counts = 12497.2 +/- 127.3
  Background counts = 3708.9
  Rate = 0.5 +/- 0.005
[Wed Nov 30 17:46:49 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 17:46:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 17:46:49 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 17:46:49 2011] Source does appear to be extended
[Wed Nov 30 17:46:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 17:47:16 2011] Counts = 12497.200000, rescaling region sizes by 3.000000
[Wed Nov 30 17:47:16 2011] XMMSAS src. selection expression = ellipse(26183.952000, 27927.247200, 960.057028, 960.057028, 0.000000, X, Y)
[Wed Nov 30 17:47:16 2011] Not overwriting source region fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src1_src.reg
[Wed Nov 30 17:47:16 2011] Extracting stamp from image fullrun_mos1_xmm0606322101_pi300-10000_cl_sm2.00.img.gz, (246, 266) - (357, 377)
[Wed Nov 30 17:47:16 2011] XMMSAS bgd. selection expression = annulus(26183.952000, 27927.247200, 4800.285138, 9600.570276, X, Y) && !ellipse(34056.402710, 37077.727814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18006.589981, 23434.185394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32048.114655, 34458.902496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30425.804138, 37091.210052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27383.196320, 28215.394012, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Nov 30 17:47:16 2011] Writing fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src1.gif
[Wed Nov 30 17:47:16 2011] ../../xmm0606322101/products/events/fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0606322101/products/events/fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Nov 30 17:47:17 2011] Mean detx,y = (277.09, -235.16) 
[Wed Nov 30 17:47:17 2011] ../../xmm0606322101/products/images/fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src1_src.img and ../../xmm0606322101/products/images/fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Nov 30 17:47:17 2011] ../../xmm0606322101/products/spectra/fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0606322101/products/spectra/fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Nov 30 17:47:17 2011] Setting source spectrum file to fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Nov 30 17:47:17 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Nov 30 17:47:17 2011] ../../xmm0606322101/products/lightcurves/fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0606322101/products/lightcurves/fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Nov 30 17:47:19 2011] fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Wed Nov 30 17:47:19 2011] fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Wed Nov 30 17:48:00 2011] Updating aperture counts using extracted products
[Wed Nov 30 17:48:00 2011] Error reading totcts from fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Nov 30 17:48:00 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 17:48:00 2011] Using photon index=1.80, rate=0.516, arf fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src1.arf
[Wed Nov 30 17:48:00 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 17:48:00 2011] Updating source flux to 4.8e-12
[Wed Nov 30 17:48:04 2011] Reading fit data from xmm0606322101/analysis//spectral/fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src1_pl.csv
[Wed Nov 30 17:48:04 2011] Spectral fit parameter nH value = 332405000000.0
[Wed Nov 30 17:48:04 2011] Spectral fit parameter PhoIndex value = 2.67515
[Wed Nov 30 17:48:04 2011] Failed to get F(0.3-8.0) from xmm0606322101/analysis//spectral/fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Nov 30 17:48:04 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 17:48:04 2011] Using Nh = 3.3e+11, photon index=2.68, rate=0.516, arf fullrun_mos1_xmm0606322101_pi300-10000_pass1_cl_src1.arf
[Wed Nov 30 17:48:04 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 17:48:04 2011] Updating source flux to 3.8e-12