[Wed Oct  5 20:29:14 2011] Detection parameters:
  Position = (326.4, 340.0) = 12 2 59.04 44 33 11.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 501.7 +/- 53.0
  Background counts = 1274.4
  Rate = 0.02 +/- 0.002

[Wed Oct  5 20:29:14 2011] Off-axis axis estimate = 3.63'
[Wed Oct  5 20:40:47 2011] Using EEF radius (= 8.24 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 20:40:47 2011] Initial guess for spatial extent in simple fitting = 8.24"
[Wed Oct  5 20:40:47 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.872
[Wed Oct  5 20:40:47 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 8.24"
[Thu Oct  6 06:22:53 2011] fullrun_pn_xmm0606322001_pi300-10000_cl_pass0_src9.ximg exists
[Thu Oct  6 06:22:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0606322001_pi300-10000_cl_pass0_src9.csv
[Thu Oct  6 06:22:53 2011] fullrun_pn_xmm0606322001_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu Oct  6 06:22:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0606322001_pi300-10000_cl_pass0_src9.csv
[Thu Oct  6 06:22:53 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0606322001_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0606322001_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 06:22:53 2011] fullrun_pn_xmm0606322001_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu Oct  6 06:22:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0606322001_pi300-10000_cl_pass0_tfrozen_src9.csv
[Thu Oct  6 06:22:53 2011] fullrun_pn_xmm0606322001_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Oct  6 06:22:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0606322001_pi300-10000_cl_pass0_tfrozen_src9.csv
[Thu Oct  6 06:22:53 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0606322001_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0606322001_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 06:52:49 2011] Spatial fit model total counts = 8594.690000, observed total counts = 9826.000000
[Thu Oct  6 06:52:49 2011] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Oct  6 06:52:49 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 06:52:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 06:52:49 2011] Assessing source extent using major
[Thu Oct  6 06:52:49 2011] Source does appear to be extended
[Thu Oct  6 06:52:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 06:53:04 2011] Using EEF radius (= 8.24 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 06:53:04 2011] Initial guess for spatial extent in simple fitting = 8.24"
[Thu Oct  6 06:53:04 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.872
[Thu Oct  6 06:53:04 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 8.24"
[Thu Oct  6 11:03:03 2011] fullrun_pn_xmm0606322001_pi300-10000_cl_pass1_src9.ximg exists
[Thu Oct  6 11:03:04 2011] fullrun_pn_xmm0606322001_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu Oct  6 11:03:04 2011] Fit fullrun_pn_xmm0606322001_pi300-10000_cl_pass1_src9 appears to have run properly
[Thu Oct  6 11:03:04 2011] fullrun_pn_xmm0606322001_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu Oct  6 11:03:04 2011] fullrun_pn_xmm0606322001_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Oct  6 11:03:04 2011] Fit fullrun_pn_xmm0606322001_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Thu Oct  6 11:36:05 2011] Spatial fit model total counts = 10022.200000, observed total counts = 9826.000000
[Thu Oct  6 11:36:05 2011] Offset between fit and detection position for source 9 = 2.703229 pixels
[Thu Oct  6 11:36:05 2011] 8565.080000 total counts/ 6383.760000 bgd. counts: snr = 27.301160
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 2.703229 pixels
  Position = (324.5, 341.9) = 12 2 59.81 44 33 18.4
  Extent = 10.9 (10.9-10.9)", rotation angle = 0
  Source counts = 2181.3 +/- 92.5
  Background counts = 6383.8
  Rate = 0.06 +/- 0.003
[Thu Oct  6 11:36:05 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 11:36:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 11:36:05 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 11:36:05 2011] Source does appear to be extended
[Thu Oct  6 11:36:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 11:36:18 2011] Counts = 2181.320000, rescaling region sizes by 2.000000
[Thu Oct  6 11:36:18 2011] XMMSAS src. selection expression = ellipse(28186.744600, 29700.041200, 1306.068038, 1306.068038, 0.000000, X, Y)
[Thu Oct  6 11:36:18 2011] Writing source region out to fullrun_pn_xmm0606322001_pi300-10000_pass1_cl_src9_src.reg
[Thu Oct  6 11:36:18 2011] Extracting stamp from image fullrun_pn_xmm0606322001_pi300-10000_cl_sm2.00.img.gz, (249, 267) - (400, 417)
[Thu Oct  6 11:36:18 2011] XMMSAS bgd. selection expression = annulus(28186.744600, 29700.041200, 4353.560125, 8707.120251, X, Y) && !ellipse(26082.402000, 27999.966000, 1496.932843, 1496.932843, 0.000000, X, Y) && !ellipse(26827.372000, 28178.430000, 1232.256035, 1232.256035, 0.000000, X, Y) && !ellipse(27421.335815, 28573.923859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28854.400000, 28452.254000, 1232.256035, 1232.256035, 0.000000, X, Y) && !ellipse(24276.466000, 27254.640000, 1133.288033, 609.637618, 57.590000, X, Y) && !ellipse(24652.259735, 26849.036285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27694.612671, 25018.380310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27581.413000, 25336.046000, 770.458422, 770.458422, 0.000000, X, Y) && !ellipse(28275.136000, 24555.116200, 1200.120035, 1200.120035, 0.000000, X, Y)
[Thu Oct  6 11:36:18 2011] Writing fullrun_pn_xmm0606322001_pi300-10000_pass1_cl_src9.gif
[Thu Oct  6 12:35:05 2011] Mean detx,y = (2305.77, -303.45) 
[Thu Oct  6 12:35:17 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Oct  6 12:36:40 2011] Binned source spectrum to 10 counts/bin
[Thu Oct  6 12:36:41 2011] Setting source spectrum file to fullrun_pn_xmm0606322001_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Oct  6 12:36:41 2011] Setting bgd. spectrum file to fullrun_pn_xmm0606322001_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Thu Oct  6 17:32:29 2011] Updating aperture counts using extracted products
[Thu Oct  6 17:32:29 2011] Error reading totcts from fullrun_pn_xmm0606322001_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Oct  6 17:32:29 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 17:32:29 2011] Using photon index=1.80, rate=0.0592, arf fullrun_pn_xmm0606322001_pi300-10000_pass1_cl_src9.arf
[Thu Oct  6 17:32:29 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 17:32:29 2011] Updating source flux to 1.7e-13
[Thu Oct  6 17:33:18 2011] Flag p found in src. 9 procflags, skipping spectral fitting