[Wed Oct  5 20:29:14 2011] Detection parameters:
  Position = (322.5, 281.3) = 12 3 0.64 44 28 57.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 218.3 +/- 47.2
  Background counts = 1291.8
  Rate = 0.01 +/- 0.002

[Wed Oct  5 20:29:14 2011] Off-axis axis estimate = 2.14'
[Wed Oct  5 20:40:47 2011] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 20:40:47 2011] Initial guess for spatial extent in simple fitting = 7.50"
[Wed Oct  5 20:40:47 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.011
[Wed Oct  5 20:40:47 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 7.50"
[Thu Oct  6 06:22:53 2011] fullrun_pn_xmm0606322001_pi300-10000_cl_pass0_src10.ximg exists
[Thu Oct  6 06:22:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0606322001_pi300-10000_cl_pass0_src10.csv
[Thu Oct  6 06:22:53 2011] fullrun_pn_xmm0606322001_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu Oct  6 06:22:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0606322001_pi300-10000_cl_pass0_src10.csv
[Thu Oct  6 06:22:53 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0606322001_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0606322001_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 06:22:53 2011] fullrun_pn_xmm0606322001_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu Oct  6 06:22:53 2011] fullrun_pn_xmm0606322001_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Oct  6 06:22:53 2011] Fit fullrun_pn_xmm0606322001_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Thu Oct  6 06:52:49 2011] Spatial fit model total counts = 11198.100000, observed total counts = 11442.000000
[Thu Oct  6 06:52:49 2011] Offset between fit and detection position for source 10 = 3.411426 pixels
[Thu Oct  6 06:52:49 2011] 10749.660000 total counts/ 7187.620000 bgd. counts: snr = 42.015181
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 3.411426 pixels
  Position = (325.6, 282.8) = 12 2 59.41 44 29 1.1
  Extent = 15.0 (15.0-30.0)", rotation angle = 0
  Source counts = 3562.0 +/- 103.7
  Background counts = 7187.6
  Rate = 0.1 +/- 0.003
[Thu Oct  6 06:52:49 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 06:52:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 06:52:49 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 06:52:49 2011] Source does appear to be extended
[Thu Oct  6 06:52:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 06:52:49 2011] Source is confused with source 7
[Thu Oct  6 06:53:04 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 06:53:04 2011] Initial guess for spatial extent in simple fitting = 15.00"
[Thu Oct  6 06:53:04 2011] source mask rpix=3.4, npix_max = 62, mask sum = 60, frac = 0.962
[Thu Oct  6 06:53:04 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 15.00"
[Thu Oct  6 11:03:04 2011] fullrun_pn_xmm0606322001_pi300-10000_cl_pass1_src10.ximg exists
[Thu Oct  6 11:03:04 2011] fullrun_pn_xmm0606322001_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu Oct  6 11:03:04 2011] Fit fullrun_pn_xmm0606322001_pi300-10000_cl_pass1_src10 appears to have run properly
[Thu Oct  6 11:03:04 2011] fullrun_pn_xmm0606322001_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu Oct  6 11:03:04 2011] fullrun_pn_xmm0606322001_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu Oct  6 11:03:04 2011] Fit fullrun_pn_xmm0606322001_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Thu Oct  6 11:36:05 2011] Source 10 is offset by 3.057402 and 0.474922 pixels which is larger than
2 X fitted extent = 2.085968 x 2.085968, not incorporating fit results
[Thu Oct  6 11:36:05 2011] Warning, spatial fit 10 centroid is now closest to src. 7
[Thu Oct  6 11:36:05 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 11:36:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 11:36:05 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 11:36:05 2011] Source does appear to be extended
[Thu Oct  6 11:36:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 11:36:18 2011] Counts = 3562.040000, rescaling region sizes by 2.000000
[Thu Oct  6 11:36:18 2011] XMMSAS src. selection expression = ellipse(28275.136000, 24555.116200, 1800.180052, 1800.180052, 0.000000, X, Y)
[Thu Oct  6 11:36:18 2011] Writing source region out to fullrun_pn_xmm0606322001_pi300-10000_pass1_cl_src10_src.reg
[Thu Oct  6 11:36:18 2011] Extracting stamp from image fullrun_pn_xmm0606322001_pi300-10000_cl_sm2.00.img.gz, (222, 179) - (429, 386)
[Thu Oct  6 11:36:18 2011] XMMSAS bgd. selection expression = annulus(28275.136000, 24555.116200, 6000.600173, 12001.200345, X, Y) && !ellipse(26082.402000, 27999.966000, 1496.932843, 1496.932843, 0.000000, X, Y) && !ellipse(26827.372000, 28178.430000, 1232.256035, 1232.256035, 0.000000, X, Y) && !ellipse(27421.335815, 28573.923859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28854.400000, 28452.254000, 1232.256035, 1232.256035, 0.000000, X, Y) && !ellipse(24276.466000, 27254.640000, 1133.288033, 609.637618, 57.590000, X, Y) && !ellipse(24652.259735, 26849.036285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27694.612671, 25018.380310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27581.413000, 25336.046000, 770.458422, 770.458422, 0.000000, X, Y) && !ellipse(28186.744600, 29700.041200, 870.712025, 870.712025, 0.000000, X, Y)
[Thu Oct  6 11:36:18 2011] Writing fullrun_pn_xmm0606322001_pi300-10000_pass1_cl_src10.gif
[Thu Oct  6 12:39:42 2011] Mean detx,y = (333.76, 3195.29) 
[Thu Oct  6 12:39:49 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Oct  6 12:41:59 2011] Binned source spectrum to 10 counts/bin
[Thu Oct  6 12:41:59 2011] Setting source spectrum file to fullrun_pn_xmm0606322001_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Oct  6 12:41:59 2011] Setting bgd. spectrum file to fullrun_pn_xmm0606322001_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu Oct  6 17:32:29 2011] Updating aperture counts using extracted products
[Thu Oct  6 17:32:29 2011] Error reading totcts from fullrun_pn_xmm0606322001_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Oct  6 17:32:29 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 17:32:29 2011] Using photon index=1.80, rate=0.0966, arf fullrun_pn_xmm0606322001_pi300-10000_pass1_cl_src10.arf
[Thu Oct  6 17:32:29 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 17:32:29 2011] Updating source flux to 3.3e-13
[Thu Oct  6 17:33:18 2011] Flag b found in src. 10 procflags, skipping spectral fitting
[Thu Oct  6 17:33:18 2011] Flag c found in src. 10 procflags, skipping spectral fitting