[Wed Oct  5 20:29:54 2011] Detection parameters:
  Position = (206.8, 271.7) = 12 3 47.66 44 28 13.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 358.4 +/- 27.8
  Background counts = 122.7
  Rate = 0.02 +/- 0.001

[Wed Oct  5 20:29:54 2011] Off-axis axis estimate = 6.92'
[Thu Oct  6 06:39:05 2011] Using EEF radius (= 9.89 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 06:39:05 2011] Initial guess for spatial extent in simple fitting = 9.89"
[Thu Oct  6 06:39:05 2011] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.975
[Thu Oct  6 06:39:05 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 9.89"
[Thu Oct  6 06:52:43 2011] fullrun_mos2_xmm0606322001_pi300-10000_cl_pass0_src2.ximg exists
[Thu Oct  6 06:52:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0606322001_pi300-10000_cl_pass0_src2.csv
[Thu Oct  6 06:52:43 2011] fullrun_mos2_xmm0606322001_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Oct  6 06:52:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0606322001_pi300-10000_cl_pass0_src2.csv
[Thu Oct  6 06:52:43 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0606322001_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0606322001_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 06:52:44 2011] fullrun_mos2_xmm0606322001_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Oct  6 06:52:44 2011] fullrun_mos2_xmm0606322001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Oct  6 06:52:44 2011] Fit fullrun_mos2_xmm0606322001_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Oct  6 06:52:54 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 12.703368 pixels away
[Thu Oct  6 06:52:54 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 06:52:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 06:52:54 2011] Assessing source extent using major
[Thu Oct  6 06:52:54 2011] Source does appear to be extended
[Thu Oct  6 06:52:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 11:20:05 2011] Using EEF radius (= 9.89 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 11:20:05 2011] Initial guess for spatial extent in simple fitting = 9.89"
[Thu Oct  6 11:20:05 2011] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.975
[Thu Oct  6 11:20:05 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 9.89"
[Thu Oct  6 11:36:00 2011] fullrun_mos2_xmm0606322001_pi300-10000_cl_pass1_src2.ximg exists
[Thu Oct  6 11:36:00 2011] fullrun_mos2_xmm0606322001_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Oct  6 11:36:00 2011] Fit fullrun_mos2_xmm0606322001_pi300-10000_cl_pass1_src2 appears to have run properly
[Thu Oct  6 11:36:00 2011] fullrun_mos2_xmm0606322001_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Oct  6 11:36:00 2011] fullrun_mos2_xmm0606322001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Oct  6 11:36:00 2011] Fit fullrun_mos2_xmm0606322001_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Oct  6 11:36:10 2011] Spatial fit model total counts = 321.650000, observed total counts = 322.000000
[Thu Oct  6 11:36:10 2011] Offset between fit and detection position for source 2 = 0.194856 pixels
[Thu Oct  6 11:36:10 2011] 325.609000 total counts/ 202.284000 bgd. counts: snr = 8.671023
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.194856 pixels
  Position = (206.9, 271.5) = 12 3 47.62 44 28 11.8
  Extent = 5.7 (4.4-7.0)", rotation angle = 0
  Source counts = 123.3 +/- 18.0
  Background counts = 202.3
  Rate = 0.007 +/- 0.001
[Thu Oct  6 11:36:10 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 11:36:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 11:36:10 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 11:36:10 2011] Source does appear to be extended
[Thu Oct  6 11:36:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 17:17:33 2011] XMMSAS src. selection expression = ellipse(17953.106160, 23575.316200, 342.293410, 342.293410, 0.000000, X, Y)
[Thu Oct  6 17:17:33 2011] Writing source region out to fullrun_mos2_xmm0606322001_pi300-10000_pass1_cl_src2_src.reg
[Thu Oct  6 17:17:33 2011] Extracting stamp from image fullrun_mos2_xmm0606322001_pi300-10000_cl_sm2.00.img.gz, (187, 252) - (227, 291)
[Thu Oct  6 17:17:33 2011] XMMSAS bgd. selection expression = annulus(17953.106160, 23575.316200, 570.489016, 1140.978033, X, Y)
[Thu Oct  6 17:17:33 2011] Writing fullrun_mos2_xmm0606322001_pi300-10000_pass1_cl_src2.gif
[Thu Oct  6 17:21:01 2011] Mean detx,y = (9309.28, 108.88) 
[Thu Oct  6 17:21:01 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Oct  6 17:21:07 2011] Binned source spectrum to 10 counts/bin
[Thu Oct  6 17:21:07 2011] Setting source spectrum file to fullrun_mos2_xmm0606322001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Oct  6 17:21:07 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0606322001_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Oct  6 17:32:30 2011] Updating aperture counts using extracted products
[Thu Oct  6 17:32:30 2011] Error reading totcts from fullrun_mos2_xmm0606322001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Oct  6 17:32:30 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 17:32:30 2011] Using photon index=1.80, rate=0.00668, arf fullrun_mos2_xmm0606322001_pi300-10000_pass1_cl_src2.arf
[Thu Oct  6 17:32:30 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 17:32:30 2011] Updating source flux to 1.5e-13