[Wed Oct  5 20:29:32 2011] Detection parameters:
  Position = (207.0, 271.8) = 12 3 47.60 44 28 12.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 296.1 +/- 26.5
  Background counts = 185.6
  Rate = 0.02 +/- 0.001

[Wed Oct  5 20:29:32 2011] Off-axis axis estimate = 6.91'
[Thu Oct  6 06:22:53 2011] Using EEF radius (= 9.88 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 06:22:53 2011] Initial guess for spatial extent in simple fitting = 9.88"
[Thu Oct  6 06:22:53 2011] source mask rpix=2.3, npix_max = 30, mask sum = 33, frac = 1.074
[Thu Oct  6 06:22:53 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 9.88"
[Thu Oct  6 06:39:05 2011] fullrun_mos1_xmm0606322001_pi300-10000_cl_pass0_src3.ximg exists
[Thu Oct  6 06:39:05 2011] fullrun_mos1_xmm0606322001_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Oct  6 06:39:05 2011] Fit fullrun_mos1_xmm0606322001_pi300-10000_cl_pass0_src3 appears to have run properly
[Thu Oct  6 06:39:05 2011] fullrun_mos1_xmm0606322001_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Oct  6 06:39:05 2011] fullrun_mos1_xmm0606322001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Oct  6 06:39:05 2011] Fit fullrun_mos1_xmm0606322001_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Oct  6 06:52:52 2011] Spatial fit model total counts = 277.000000, observed total counts = 277.000000
[Thu Oct  6 06:52:52 2011] Offset between fit and detection position for source 9 = 0.164554 pixels
[Thu Oct  6 06:52:52 2011] 284.035000 total counts/ 195.375000 bgd. counts: snr = 6.342978
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.164554 pixels
  Position = (207.1, 271.8) = 12 3 47.54 44 28 12.9
  Extent = 5.9 (4.3-7.9)", rotation angle = 0
  Source counts = 88.7 +/- 16.9
  Background counts = 195.4
  Rate = 0.005 +/- 0.001
[Thu Oct  6 06:52:52 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 06:52:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 06:52:52 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 06:52:52 2011] Source does appear to be extended
[Thu Oct  6 06:52:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 11:03:04 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 11:03:04 2011] Initial guess for spatial extent in simple fitting = 5.86"
[Thu Oct  6 11:03:04 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.173
[Thu Oct  6 11:03:04 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 5.86"
[Thu Oct  6 11:20:05 2011] fullrun_mos1_xmm0606322001_pi300-10000_cl_pass1_src3.ximg exists
[Thu Oct  6 11:20:05 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0606322001_pi300-10000_cl_pass1_src3.csv
[Thu Oct  6 11:20:05 2011] fullrun_mos1_xmm0606322001_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Oct  6 11:20:05 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0606322001_pi300-10000_cl_pass1_src3.csv
[Thu Oct  6 11:20:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606322001_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606322001_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 11:20:05 2011] fullrun_mos1_xmm0606322001_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Oct  6 11:20:05 2011] fullrun_mos1_xmm0606322001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Oct  6 11:20:05 2011] Fit fullrun_mos1_xmm0606322001_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Oct  6 11:36:07 2011] Warning, spatial fit 3 centroid is now closest to src. 7
[Thu Oct  6 11:36:07 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 11:36:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 11:36:07 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 11:36:07 2011] Source does appear to be extended
[Thu Oct  6 11:36:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 16:56:50 2011] XMMSAS src. selection expression = ellipse(17971.864060, 23597.628340, 351.506410, 351.506410, 0.000000, X, Y)
[Thu Oct  6 16:56:50 2011] Writing source region out to fullrun_mos1_xmm0606322001_pi300-10000_pass1_cl_src9_src.reg
[Thu Oct  6 16:56:50 2011] Extracting stamp from image fullrun_mos1_xmm0606322001_pi300-10000_cl_sm2.00.img.gz, (187, 252) - (227, 292)
[Thu Oct  6 16:56:50 2011] XMMSAS bgd. selection expression = annulus(17971.864060, 23597.628340, 585.844017, 1171.688034, X, Y)
[Thu Oct  6 16:56:50 2011] Writing fullrun_mos1_xmm0606322001_pi300-10000_pass1_cl_src9.gif
[Thu Oct  6 17:00:07 2011] Mean detx,y = (382.75, -9440.52) 
[Thu Oct  6 17:00:08 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Oct  6 17:00:22 2011] Binned source spectrum to 10 counts/bin
[Thu Oct  6 17:00:22 2011] Setting source spectrum file to fullrun_mos1_xmm0606322001_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Oct  6 17:00:22 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0606322001_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Thu Oct  6 17:17:16 2011] Not generating rmf since there are only 88 counts
[Thu Oct  6 17:17:16 2011] rmf not generated due to insufficient counts
[Thu Oct  6 17:32:30 2011] Updating aperture counts using extracted products
[Thu Oct  6 17:32:30 2011] Error reading totcts from fullrun_mos1_xmm0606322001_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Oct  6 17:32:30 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 17:32:30 2011] Using photon index=1.80, rate=0.0051, arf fullrun_mos1_xmm0606322001_pi300-10000_pass1_cl_src9.arf
[Thu Oct  6 17:32:30 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 17:32:30 2011] Updating source flux to 1.3e-13
[Thu Oct  6 17:32:31 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting