[Wed Oct  5 20:29:31 2011] Detection parameters:
  Position = (391.3, 427.3) = 12 2 32.56 44 39 30.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 367.2 +/- 28.0
  Background counts = 183.1
  Rate = 0.02 +/- 0.001

[Wed Oct  5 20:29:32 2011] Off-axis axis estimate = 11.51'
[Thu Oct  6 06:22:53 2011] Using EEF radius (= 12.19 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 06:22:53 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct  6 06:22:53 2011] Initial guess for spatial extent in simple fitting = 12.19"
[Thu Oct  6 06:22:53 2011] source mask rpix=2.8, npix_max = 43, mask sum = 41, frac = 0.940
[Thu Oct  6 06:22:53 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 12.19"
[Thu Oct  6 06:39:05 2011] fullrun_mos1_xmm0606322001_pi300-10000_cl_pass0_src2.ximg exists
[Thu Oct  6 06:39:05 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0606322001_pi300-10000_cl_pass0_src2.csv
[Thu Oct  6 06:39:05 2011] fullrun_mos1_xmm0606322001_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Oct  6 06:39:05 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0606322001_pi300-10000_cl_pass0_src2.csv
[Thu Oct  6 06:39:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606322001_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606322001_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 06:39:05 2011] fullrun_mos1_xmm0606322001_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Oct  6 06:39:05 2011] fullrun_mos1_xmm0606322001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Oct  6 06:39:05 2011] Fit fullrun_mos1_xmm0606322001_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Oct  6 06:52:52 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 12.349488 pixels away
[Thu Oct  6 06:52:52 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 06:52:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 06:52:52 2011] Assessing source extent using major
[Thu Oct  6 06:52:52 2011] Source does appear to be extended
[Thu Oct  6 06:52:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 11:03:04 2011] Using EEF radius (= 12.19 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 11:03:04 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct  6 11:03:04 2011] Initial guess for spatial extent in simple fitting = 12.19"
[Thu Oct  6 11:03:04 2011] source mask rpix=2.8, npix_max = 43, mask sum = 41, frac = 0.940
[Thu Oct  6 11:03:04 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 12.19"
[Thu Oct  6 11:20:05 2011] fullrun_mos1_xmm0606322001_pi300-10000_cl_pass1_src2.ximg exists
[Thu Oct  6 11:20:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606322001_pi300-10000_cl_pass1_src2.csv
[Thu Oct  6 11:20:05 2011] fullrun_mos1_xmm0606322001_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Oct  6 11:20:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606322001_pi300-10000_cl_pass1_src2.csv
[Thu Oct  6 11:20:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606322001_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606322001_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 11:20:05 2011] fullrun_mos1_xmm0606322001_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Oct  6 11:20:05 2011] fullrun_mos1_xmm0606322001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Oct  6 11:20:05 2011] Fit fullrun_mos1_xmm0606322001_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Oct  6 11:36:07 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 16.590165 pixels away
[Thu Oct  6 11:36:07 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 11:36:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 11:36:07 2011] Assessing source extent using major
[Thu Oct  6 11:36:07 2011] Source does appear to be extended
[Thu Oct  6 11:36:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 16:56:50 2011] XMMSAS src. selection expression = ellipse(33996.067169, 37124.275787, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Oct  6 16:56:50 2011] Writing source region out to fullrun_mos1_xmm0606322001_pi300-10000_pass1_cl_src4_src.reg
[Thu Oct  6 16:56:50 2011] Extracting stamp from image fullrun_mos1_xmm0606322001_pi300-10000_cl_sm2.00.img.gz, (354, 390) - (429, 465)
[Thu Oct  6 16:56:50 2011] XMMSAS bgd. selection expression = annulus(33996.067169, 37124.275787, 1087.500000, 2175.000000, X, Y) && !ellipse(32008.536133, 34487.136078, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Oct  6 16:56:50 2011] Writing fullrun_mos1_xmm0606322001_pi300-10000_pass1_cl_src4.gif
[Thu Oct  6 16:59:55 2011] Mean detx,y = (4544.10, 11058.78) 
[Thu Oct  6 16:59:56 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Oct  6 17:00:04 2011] Binned source spectrum to 10 counts/bin
[Thu Oct  6 17:00:05 2011] Setting source spectrum file to fullrun_mos1_xmm0606322001_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Oct  6 17:00:05 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0606322001_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu Oct  6 17:17:13 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Oct  6 17:17:13 2011] rmf not generated due to insufficient counts
[Thu Oct  6 17:32:30 2011] Updating aperture counts using extracted products
[Thu Oct  6 17:32:30 2011] Error reading totcts from fullrun_mos1_xmm0606322001_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Oct  6 17:32:30 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 17:32:30 2011] Using photon index=1.80, rate=0.0185, arf fullrun_mos1_xmm0606322001_pi300-10000_pass1_cl_src4.arf
[Thu Oct  6 17:32:30 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 17:32:30 2011] Updating source flux to 3.2e-13
[Thu Oct  6 17:32:31 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting