[Wed Oct  5 20:29:31 2011] Detection parameters:
  Position = (300.7, 322.2) = 12 3 9.52 44 31 53.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95047.0 +/- 364.9
  Background counts = 287.4
  Rate = 3 +/- 0.01

[Wed Oct  5 20:29:32 2011] Off-axis axis estimate = 1.73'
[Thu Oct  6 06:22:53 2011] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 06:22:53 2011] Initial guess for spatial extent in simple fitting = 7.29"
[Thu Oct  6 06:22:53 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.055
[Thu Oct  6 06:22:53 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Thu Oct  6 06:39:05 2011] fullrun_mos1_xmm0606322001_pi300-10000_cl_pass0_src1.ximg exists
[Thu Oct  6 06:39:05 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0606322001_pi300-10000_cl_pass0_src1.csv
[Thu Oct  6 06:39:05 2011] fullrun_mos1_xmm0606322001_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Oct  6 06:39:05 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0606322001_pi300-10000_cl_pass0_src1.csv
[Thu Oct  6 06:39:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606322001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606322001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 06:39:05 2011] fullrun_mos1_xmm0606322001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct  6 06:39:05 2011] fullrun_mos1_xmm0606322001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct  6 06:39:05 2011] Fit fullrun_mos1_xmm0606322001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct  6 06:52:52 2011] Spatial fit model total counts = 31481.200000, observed total counts = 31471.000000
[Thu Oct  6 06:52:52 2011] Offset between fit and detection position for source 1 = 0.242754 pixels
[Thu Oct  6 06:52:52 2011] 31618.140000 total counts/ 6780.840000 bgd. counts: snr = 301.621736
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.242754 pixels
  Position = (300.5, 322.3) = 12 3 9.61 44 31 53.1
  Extent = 5.4 (5.4-5.5)", rotation angle = 0
  Source counts = 24837.3 +/- 177.8
  Background counts = 6780.8
  Rate = 1 +/- 0.01
[Thu Oct  6 06:52:52 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 06:52:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 06:52:52 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 06:52:52 2011] Source does appear to be extended
[Thu Oct  6 06:52:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 11:03:04 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 11:03:04 2011] Initial guess for spatial extent in simple fitting = 5.43"
[Thu Oct  6 11:03:04 2011] source mask rpix=1.2, npix_max = 12, mask sum = 9, frac = 0.735
[Thu Oct  6 11:03:04 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.43"
[Thu Oct  6 11:20:05 2011] fullrun_mos1_xmm0606322001_pi300-10000_cl_pass1_src1.ximg exists
[Thu Oct  6 11:20:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606322001_pi300-10000_cl_pass1_src1.csv
[Thu Oct  6 11:20:05 2011] fullrun_mos1_xmm0606322001_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Oct  6 11:20:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606322001_pi300-10000_cl_pass1_src1.csv
[Thu Oct  6 11:20:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606322001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606322001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 11:20:05 2011] fullrun_mos1_xmm0606322001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct  6 11:20:05 2011] fullrun_mos1_xmm0606322001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct  6 11:20:05 2011] Fit fullrun_mos1_xmm0606322001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct  6 11:36:07 2011] Spatial fit model total counts = 31476.800000, observed total counts = 31471.000000
[Thu Oct  6 11:36:07 2011] Offset between fit and detection position for source 1 = 0.000030 pixels
[Thu Oct  6 11:36:07 2011] 31613.710000 total counts/ 6780.410000 bgd. counts: snr = 301.582722
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000030 pixels
  Position = (300.5, 322.3) = 12 3 9.61 44 31 53.1
  Extent = 5.4 (5.4-5.5)", rotation angle = 0
  Source counts = 24833.3 +/- 177.8
  Background counts = 6780.4
  Rate = 1 +/- 0.01
[Thu Oct  6 11:36:07 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 11:36:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 11:36:07 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 11:36:07 2011] Source does appear to be extended
[Thu Oct  6 11:36:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 16:56:50 2011] Counts = 24833.300000, rescaling region sizes by 3.000000
[Thu Oct  6 16:56:50 2011] XMMSAS src. selection expression = ellipse(26091.563600, 27994.467600, 978.021028, 978.021028, 0.000000, X, Y)
[Thu Oct  6 16:56:50 2011] Writing source region out to fullrun_mos1_xmm0606322001_pi300-10000_pass1_cl_src1_src.reg
[Thu Oct  6 16:56:50 2011] Extracting stamp from image fullrun_mos1_xmm0606322001_pi300-10000_cl_sm2.00.img.gz, (244, 266) - (357, 379)
[Thu Oct  6 16:56:50 2011] XMMSAS bgd. selection expression = annulus(26091.563600, 27994.467600, 4890.105141, 9780.210281, X, Y) && !ellipse(33996.067169, 37124.275787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17971.864060, 23597.628340, 468.675213, 468.675213, 0.000000, X, Y) && !ellipse(15525.966904, 34461.873474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32008.536133, 34487.136078, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Oct  6 16:56:50 2011] Writing fullrun_mos1_xmm0606322001_pi300-10000_pass1_cl_src1.gif
[Thu Oct  6 16:56:55 2011] Mean detx,y = (328.23, -209.47) 
[Thu Oct  6 16:56:56 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Oct  6 16:59:52 2011] Binned source spectrum to 10 counts/bin
[Thu Oct  6 16:59:52 2011] Setting source spectrum file to fullrun_mos1_xmm0606322001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Oct  6 16:59:52 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0606322001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Oct  6 17:32:29 2011] Updating aperture counts using extracted products
[Thu Oct  6 17:32:30 2011] Error reading totcts from fullrun_mos1_xmm0606322001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Oct  6 17:32:30 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 17:32:30 2011] Using photon index=1.80, rate=1.43, arf fullrun_mos1_xmm0606322001_pi300-10000_pass1_cl_src1.arf
[Thu Oct  6 17:32:30 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 17:32:30 2011] Updating source flux to 1.3e-11
[Thu Oct  6 17:32:54 2011] Reading fit data from xmm0606322001/analysis//spectral/fullrun_mos1_xmm0606322001_pi300-10000_pass1_cl_src1_pl.csv
[Thu Oct  6 17:32:54 2011] Spectral fit parameter nH value = 1.88871e+14
[Thu Oct  6 17:32:54 2011] Spectral fit parameter PhoIndex value = 2.41465
[Thu Oct  6 17:32:54 2011] Failed to get F(0.3-8.0) from xmm0606322001/analysis//spectral/fullrun_mos1_xmm0606322001_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Oct  6 17:32:54 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 17:32:54 2011] Using Nh = 1.9e+14, photon index=2.41, rate=1.43, arf fullrun_mos1_xmm0606322001_pi300-10000_pass1_cl_src1.arf
[Thu Oct  6 17:32:54 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 17:32:54 2011] Updating source flux to 1.1e-11