[Wed Oct  5 02:29:33 2011] Detection parameters:
  Position = (297.0, 321.8) = 12 3 9.67 44 31 52.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 989890.2 +/- 1001.3
  Background counts = 293.9
  Rate = 3e+01 +/- 0.04

[Wed Oct  5 02:29:33 2011] Off-axis axis estimate = 1.70'
[Wed Oct  5 02:42:27 2011] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 02:42:27 2011] Initial guess for spatial extent in simple fitting = 7.28"
[Wed Oct  5 02:42:27 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Wed Oct  5 02:42:27 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Wed Oct  5 03:00:14 2011] fullrun_pn_xmm0606321601_pi300-10000_cl_pass0_src1.ximg exists
[Wed Oct  5 03:00:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0606321601_pi300-10000_cl_pass0_src1.csv
[Wed Oct  5 03:00:14 2011] fullrun_pn_xmm0606321601_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Oct  5 03:00:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0606321601_pi300-10000_cl_pass0_src1.csv
[Wed Oct  5 03:00:14 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0606321601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0606321601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 03:00:14 2011] fullrun_pn_xmm0606321601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct  5 03:00:14 2011] fullrun_pn_xmm0606321601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct  5 03:00:14 2011] Fit fullrun_pn_xmm0606321601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct  5 05:24:16 2011] Spatial fit model total counts = 819904.000000, observed total counts = 867806.000000
[Wed Oct  5 05:24:16 2011] Offset between fit and detection position for source 1 = 0.238094 pixels
[Wed Oct  5 05:24:16 2011] 819626.000000 total counts/ 25600.000000 bgd. counts: snr = 4962.662500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.238094 pixels
  Position = (296.9, 321.6) = 12 3 9.70 44 31 52.2
  Extent = 7.2 (7.2-7.2)", rotation angle = 0
  Source counts = 794026.0 +/- 905.3
  Background counts = 25600.0
  Rate = 2e+01 +/- 0.02
[Wed Oct  5 05:24:16 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 05:24:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 05:24:16 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 05:24:16 2011] Source does appear to be extended
[Wed Oct  5 05:24:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 05:24:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 05:24:29 2011] Initial guess for spatial extent in simple fitting = 7.17"
[Wed Oct  5 05:24:29 2011] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.084
[Wed Oct  5 05:24:29 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.17"
[Wed Oct  5 08:30:16 2011] fullrun_pn_xmm0606321601_pi300-10000_cl_pass1_src1.ximg exists
[Wed Oct  5 08:30:16 2011] fullrun_pn_xmm0606321601_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Oct  5 08:30:16 2011] Fit fullrun_pn_xmm0606321601_pi300-10000_cl_pass1_src1 appears to have run properly
[Wed Oct  5 08:30:16 2011] fullrun_pn_xmm0606321601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct  5 08:30:16 2011] fullrun_pn_xmm0606321601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct  5 08:30:16 2011] Fit fullrun_pn_xmm0606321601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct  5 09:25:43 2011] Spatial fit model total counts = 821130.000000, observed total counts = 870061.000000
[Wed Oct  5 09:25:43 2011] Offset between fit and detection position for source 1 = 0.003511 pixels
[Wed Oct  5 09:25:43 2011] 820918.000000 total counts/ 25600.000000 bgd. counts: snr = 4970.737500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.003511 pixels
  Position = (296.9, 321.6) = 12 3 9.70 44 31 52.2
  Extent = 7.2 (7.2-7.2)", rotation angle = 0
  Source counts = 795318.0 +/- 906.0
  Background counts = 25600.0
  Rate = 2e+01 +/- 0.02
[Wed Oct  5 09:25:43 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 09:25:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 09:25:43 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 09:25:43 2011] Source does appear to be extended
[Wed Oct  5 09:25:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 09:25:52 2011] Counts = 795318.000000, rescaling region sizes by 3.000000
[Wed Oct  5 09:25:52 2011] XMMSAS src. selection expression = ellipse(25783.295480, 27927.928400, 1293.597037, 1293.597037, 0.000000, X, Y)
[Wed Oct  5 09:25:52 2011] Writing source region out to fullrun_pn_xmm0606321601_pi300-10000_pass1_cl_src1_src.reg
[Wed Oct  5 09:25:52 2011] Extracting stamp from image fullrun_pn_xmm0606321601_pi300-10000_cl_sm2.00.img.gz, (223, 247) - (371, 396)
[Wed Oct  5 09:25:52 2011] XMMSAS bgd. selection expression = annulus(25783.295480, 27927.928400, 6467.985186, 12935.970372, X, Y) && !ellipse(27572.468048, 25627.173218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27936.654000, 25154.782000, 1140.696033, 1140.696033, 0.000000, X, Y)
[Wed Oct  5 09:25:52 2011] Writing fullrun_pn_xmm0606321601_pi300-10000_pass1_cl_src1.gif
[Wed Oct  5 09:29:09 2011] Mean detx,y = (72.15, -181.30) 
[Wed Oct  5 09:29:19 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Oct  5 09:31:41 2011] Binned source spectrum to 10 counts/bin
[Wed Oct  5 09:31:41 2011] Setting source spectrum file to fullrun_pn_xmm0606321601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Oct  5 09:31:41 2011] Setting bgd. spectrum file to fullrun_pn_xmm0606321601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Oct  5 12:28:21 2011] Updating aperture counts using extracted products
[Wed Oct  5 12:28:21 2011] Error reading totcts from fullrun_pn_xmm0606321601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Oct  5 12:28:22 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 12:28:22 2011] Using photon index=1.80, rate=19.2, arf fullrun_pn_xmm0606321601_pi300-10000_pass1_cl_src1.arf
[Wed Oct  5 12:28:22 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 12:28:22 2011] Updating source flux to 4.5e-11
[Wed Oct  5 12:30:01 2011] Reading fit data from xmm0606321601/analysis//spectral/fullrun_pn_xmm0606321601_pi300-10000_pass1_cl_src1_pl.csv
[Wed Oct  5 12:30:01 2011] Spectral fit parameter nH value = 991126000000.0
[Wed Oct  5 12:30:01 2011] Spectral fit parameter PhoIndex value = 2.61942
[Wed Oct  5 12:30:01 2011] Failed to get F(0.3-8.0) from xmm0606321601/analysis//spectral/fullrun_pn_xmm0606321601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Oct  5 12:30:01 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 12:30:01 2011] Using Nh = 9.9e+11, photon index=2.62, rate=19.2, arf fullrun_pn_xmm0606321601_pi300-10000_pass1_cl_src1.arf
[Wed Oct  5 12:30:01 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 12:30:01 2011] Updating source flux to 3e-11