[Wed Oct  5 22:35:03 2011] Detection parameters:
  Position = (386.9, 427.2) = 12 2 32.68 44 39 29.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 308.1 +/- 26.4
  Background counts = 144.2
  Rate = 0.01 +/- 0.001

[Wed Oct  5 22:35:03 2011] Off-axis axis estimate = 11.33'
[Wed Oct  5 23:15:45 2011] Using EEF radius (= 12.09 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 23:15:45 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 23:15:45 2011] Initial guess for spatial extent in simple fitting = 12.09"
[Wed Oct  5 23:15:45 2011] source mask rpix=2.8, npix_max = 43, mask sum = 32, frac = 0.744
[Wed Oct  5 23:15:45 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 12.09"
[Wed Oct  5 23:28:49 2011] fullrun_mos1_xmm0606321501_pi300-10000_cl_pass0_src3.ximg exists
[Wed Oct  5 23:28:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606321501_pi300-10000_cl_pass0_src3.csv
[Wed Oct  5 23:28:49 2011] fullrun_mos1_xmm0606321501_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Oct  5 23:28:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606321501_pi300-10000_cl_pass0_src3.csv
[Wed Oct  5 23:28:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606321501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606321501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 23:28:49 2011] fullrun_mos1_xmm0606321501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Oct  5 23:28:49 2011] fullrun_mos1_xmm0606321501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Oct  5 23:28:49 2011] Fit fullrun_mos1_xmm0606321501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Oct  5 23:43:27 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 10.989391 pixels away
[Wed Oct  5 23:43:27 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 23:43:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 23:43:27 2011] Assessing source extent using major
[Wed Oct  5 23:43:27 2011] Source does appear to be extended
[Wed Oct  5 23:43:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 00:29:22 2011] Using EEF radius (= 12.09 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 00:29:22 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct  6 00:29:22 2011] Initial guess for spatial extent in simple fitting = 12.09"
[Thu Oct  6 00:29:22 2011] source mask rpix=2.8, npix_max = 43, mask sum = 32, frac = 0.744
[Thu Oct  6 00:29:22 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 12.09"
[Thu Oct  6 00:36:36 2011] fullrun_mos1_xmm0606321501_pi300-10000_cl_pass1_src3.ximg exists
[Thu Oct  6 00:36:36 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0606321501_pi300-10000_cl_pass1_src3.csv
[Thu Oct  6 00:36:36 2011] fullrun_mos1_xmm0606321501_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Oct  6 00:36:36 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0606321501_pi300-10000_cl_pass1_src3.csv
[Thu Oct  6 00:36:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606321501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606321501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 00:36:36 2011] fullrun_mos1_xmm0606321501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Oct  6 00:36:36 2011] fullrun_mos1_xmm0606321501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Oct  6 00:36:36 2011] Fit fullrun_mos1_xmm0606321501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Oct  6 00:44:49 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 15.218306 pixels away
[Thu Oct  6 00:44:49 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 00:44:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 00:44:49 2011] Assessing source extent using major
[Thu Oct  6 00:44:49 2011] Source does appear to be extended
[Thu Oct  6 00:44:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 02:35:28 2011] XMMSAS src. selection expression = ellipse(33611.929565, 37116.714264, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Oct  6 02:35:28 2011] Writing source region out to fullrun_mos1_xmm0606321501_pi300-10000_pass1_cl_src6_src.reg
[Thu Oct  6 02:35:28 2011] Extracting stamp from image fullrun_mos1_xmm0606321501_pi300-10000_cl_sm2.00.img.gz, (349, 390) - (424, 465)
[Thu Oct  6 02:35:28 2011] XMMSAS bgd. selection expression = annulus(33611.929565, 37116.714264, 1087.500000, 2175.000000, X, Y)
[Thu Oct  6 02:35:28 2011] Writing fullrun_mos1_xmm0606321501_pi300-10000_pass1_cl_src6.gif
[Thu Oct  6 02:40:01 2011] Mean detx,y = (2525.42, 11639.73) 
[Thu Oct  6 02:40:03 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Oct  6 02:40:15 2011] Binned source spectrum to 10 counts/bin
[Thu Oct  6 02:40:16 2011] Setting source spectrum file to fullrun_mos1_xmm0606321501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Oct  6 02:40:16 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0606321501_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu Oct  6 03:04:11 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Oct  6 03:04:11 2011] rmf not generated due to insufficient counts
[Thu Oct  6 03:23:02 2011] Updating aperture counts using extracted products
[Thu Oct  6 03:23:02 2011] Error reading totcts from fullrun_mos1_xmm0606321501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Oct  6 03:23:02 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 03:23:02 2011] Using photon index=1.80, rate=0.0146, arf fullrun_mos1_xmm0606321501_pi300-10000_pass1_cl_src6.arf
[Thu Oct  6 03:23:02 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 03:23:02 2011] Updating source flux to 2.5e-13
[Thu Oct  6 03:23:04 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting