[Sat Oct 15 14:27:42 2011] Detection parameters:
  Position = (322.0, 337.8) = 12 2 58.93 44 33 0.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 293.2 +/- 42.0
  Background counts = 663.7
  Rate = 0.01 +/- 0.002

[Sat Oct 15 14:27:42 2011] Off-axis axis estimate = 3.32'
[Sat Oct 15 14:36:04 2011] Using EEF radius (= 8.09 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 14:36:04 2011] Initial guess for spatial extent in simple fitting = 8.09"
[Sat Oct 15 14:36:04 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.898
[Sat Oct 15 14:36:04 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 8.09"
[Sat Oct 15 14:49:07 2011] fullrun_pn_xmm0606321301_pi300-10000_cl_pass0_src2.ximg exists
[Sat Oct 15 14:49:07 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0606321301_pi300-10000_cl_pass0_src2.csv
[Sat Oct 15 14:49:07 2011] fullrun_pn_xmm0606321301_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Oct 15 14:49:07 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0606321301_pi300-10000_cl_pass0_src2.csv
[Sat Oct 15 14:49:07 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0606321301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0606321301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 14:49:07 2011] fullrun_pn_xmm0606321301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Oct 15 14:49:07 2011] fullrun_pn_xmm0606321301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Oct 15 14:49:07 2011] Fit fullrun_pn_xmm0606321301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Oct 15 15:51:16 2011] Spatial fit model total counts = 6898.650000, observed total counts = 7074.000000
[Sat Oct 15 15:51:16 2011] Offset between fit and detection position for source 2 = 0.797951 pixels
[Sat Oct 15 15:51:16 2011] 6161.058000 total counts/ 5557.950000 bgd. counts: snr = 8.089800
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.797951 pixels
  Position = (322.5, 338.4) = 12 2 58.73 44 33 3.5
  Extent = 7.4 (6.7-8.0)", rotation angle = 0
  Source counts = 603.1 +/- 78.5
  Background counts = 5557.9
  Rate = 0.02 +/- 0.003
[Sat Oct 15 15:51:16 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 15:51:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 15:51:16 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 15:51:16 2011] Source does appear to be extended
[Sat Oct 15 15:51:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 15:51:24 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 15:51:24 2011] Initial guess for spatial extent in simple fitting = 7.37"
[Sat Oct 15 15:51:24 2011] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.298
[Sat Oct 15 15:51:24 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 7.37"
[Sat Oct 15 18:45:24 2011] fullrun_pn_xmm0606321301_pi300-10000_cl_pass1_src2.ximg exists
[Sat Oct 15 18:45:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0606321301_pi300-10000_cl_pass1_src2.csv
[Sat Oct 15 18:45:24 2011] fullrun_pn_xmm0606321301_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Oct 15 18:45:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0606321301_pi300-10000_cl_pass1_src2.csv
[Sat Oct 15 18:45:24 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0606321301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0606321301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 18:45:24 2011] fullrun_pn_xmm0606321301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Oct 15 18:45:24 2011] fullrun_pn_xmm0606321301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Oct 15 18:45:24 2011] Fit fullrun_pn_xmm0606321301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Oct 15 20:54:54 2011] Spatial fit model total counts = 6882.230000, observed total counts = 7074.000000
[Sat Oct 15 20:54:54 2011] Offset between fit and detection position for source 2 = 0.060304 pixels
[Sat Oct 15 20:54:54 2011] 6149.271000 total counts/ 5516.920000 bgd. counts: snr = 8.513534
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.060304 pixels
  Position = (322.5, 338.3) = 12 2 58.74 44 33 3.3
  Extent = 7.6 (6.9-8.1)", rotation angle = 0
  Source counts = 632.4 +/- 78.4
  Background counts = 5516.9
  Rate = 0.02 +/- 0.003
[Sat Oct 15 20:54:54 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 20:54:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 20:54:54 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 20:54:54 2011] Source does appear to be extended
[Sat Oct 15 20:54:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 20:55:00 2011] XMMSAS src. selection expression = ellipse(28005.582400, 29387.666400, 456.175524, 456.175524, 0.000000, X, Y)
[Sat Oct 15 20:55:00 2011] Writing source region out to fullrun_pn_xmm0606321301_pi300-10000_pass1_cl_src2_src.reg
[Sat Oct 15 20:55:00 2011] Extracting stamp from image fullrun_pn_xmm0606321301_pi300-10000_cl_sm2.00.img.gz, (296, 312) - (349, 365)
[Sat Oct 15 20:55:00 2011] XMMSAS bgd. selection expression = annulus(28005.582400, 29387.666400, 760.292540, 1520.585080, X, Y) && !ellipse(25656.315800, 27953.308600, 1633.922596, 1633.922596, 0.000000, X, Y)
[Sat Oct 15 20:55:00 2011] Writing fullrun_pn_xmm0606321301_pi300-10000_pass1_cl_src2.gif
[Sat Oct 15 21:01:52 2011] Mean detx,y = (2728.20, 258.67) 
[Sat Oct 15 21:01:59 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Oct 15 21:02:09 2011] Binned source spectrum to 10 counts/bin
[Sat Oct 15 21:02:09 2011] Setting source spectrum file to fullrun_pn_xmm0606321301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Oct 15 21:02:09 2011] Setting bgd. spectrum file to fullrun_pn_xmm0606321301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Oct 15 22:22:22 2011] Updating aperture counts using extracted products
[Sat Oct 15 22:22:22 2011] Error reading totcts from fullrun_pn_xmm0606321301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Oct 15 22:22:23 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 22:22:23 2011] Using photon index=1.80, rate=0.021, arf fullrun_pn_xmm0606321301_pi300-10000_pass1_cl_src2.arf
[Sat Oct 15 22:22:23 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Oct 15 22:22:23 2011] Updating source flux to 6.1e-14