[Sat Oct 15 14:27:43 2011] Detection parameters:
  Position = (295.7, 321.9) = 12 3 9.62 44 31 51.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 175885.2 +/- 502.3
  Background counts = 125.6
  Rate = 6 +/- 0.02

[Sat Oct 15 14:27:43 2011] Off-axis axis estimate = 1.71'
[Sat Oct 15 14:49:07 2011] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 14:49:07 2011] Initial guess for spatial extent in simple fitting = 7.28"
[Sat Oct 15 14:49:07 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Sat Oct 15 14:49:07 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sat Oct 15 14:59:23 2011] fullrun_mos1_xmm0606321301_pi300-10000_cl_pass0_src1.ximg exists
[Sat Oct 15 14:59:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606321301_pi300-10000_cl_pass0_src1.csv
[Sat Oct 15 14:59:23 2011] fullrun_mos1_xmm0606321301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Oct 15 14:59:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606321301_pi300-10000_cl_pass0_src1.csv
[Sat Oct 15 14:59:23 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606321301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606321301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 14:59:23 2011] fullrun_mos1_xmm0606321301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 15 14:59:23 2011] fullrun_mos1_xmm0606321301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 15 14:59:23 2011] Fit fullrun_mos1_xmm0606321301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 15 15:51:17 2011] Spatial fit model total counts = 100655.000000, observed total counts = 100655.000000
[Sat Oct 15 15:51:17 2011] Offset between fit and detection position for source 1 = 0.205157 pixels
[Sat Oct 15 15:51:17 2011] 100458.200000 total counts/ 21024.700000 bgd. counts: snr = 547.821150
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.205157 pixels
  Position = (295.5, 321.8) = 12 3 9.70 44 31 51.4
  Extent = 5.6 (5.6-5.7)", rotation angle = 0
  Source counts = 79433.5 +/- 317.0
  Background counts = 21024.7
  Rate = 4 +/- 0.02
[Sat Oct 15 15:51:17 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 15:51:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 15:51:17 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 15:51:17 2011] Source does appear to be extended
[Sat Oct 15 15:51:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 18:45:24 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 18:45:24 2011] Initial guess for spatial extent in simple fitting = 5.64"
[Sat Oct 15 18:45:24 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.930
[Sat Oct 15 18:45:24 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.64"
[Sat Oct 15 18:49:42 2011] fullrun_mos1_xmm0606321301_pi300-10000_cl_pass1_src1.ximg exists
[Sat Oct 15 18:49:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606321301_pi300-10000_cl_pass1_src1.csv
[Sat Oct 15 18:49:42 2011] fullrun_mos1_xmm0606321301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Oct 15 18:49:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606321301_pi300-10000_cl_pass1_src1.csv
[Sat Oct 15 18:49:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606321301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606321301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 18:49:42 2011] fullrun_mos1_xmm0606321301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 15 18:49:42 2011] fullrun_mos1_xmm0606321301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 15 18:49:42 2011] Fit fullrun_mos1_xmm0606321301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 15 20:54:54 2011] Spatial fit model total counts = 100252.000000, observed total counts = 100252.000000
[Sat Oct 15 20:54:54 2011] Offset between fit and detection position for source 1 = 0.021611 pixels
[Sat Oct 15 20:54:54 2011] 100892.900000 total counts/ 21574.800000 bgd. counts: snr = 540.006408
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.021611 pixels
  Position = (295.5, 321.8) = 12 3 9.71 44 31 51.3
  Extent = 5.6 (5.6-5.7)", rotation angle = 0
  Source counts = 79318.1 +/- 317.6
  Background counts = 21574.8
  Rate = 4 +/- 0.02
[Sat Oct 15 20:54:54 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 20:54:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 20:54:54 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 20:54:54 2011] Source does appear to be extended
[Sat Oct 15 20:54:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 21:40:13 2011] Counts = 79318.100000, rescaling region sizes by 3.000000
[Sat Oct 15 21:40:13 2011] XMMSAS src. selection expression = ellipse(25661.474400, 27947.687480, 1013.466629, 1013.466629, 0.000000, X, Y)
[Sat Oct 15 21:40:13 2011] Writing source region out to fullrun_mos1_xmm0606321301_pi300-10000_pass1_cl_src1_src.reg
[Sat Oct 15 21:40:13 2011] Extracting stamp from image fullrun_mos1_xmm0606321301_pi300-10000_cl_sm2.00.img.gz, (237, 264) - (354, 380)
[Sat Oct 15 21:40:13 2011] XMMSAS bgd. selection expression = annulus(25661.474400, 27947.687480, 5067.333146, 10134.666292, X, Y) && !ellipse(17517.366318, 23529.960266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15100.956451, 34416.090149, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Oct 15 21:40:13 2011] Writing fullrun_mos1_xmm0606321301_pi300-10000_pass1_cl_src1.gif
[Sat Oct 15 21:40:21 2011] Mean detx,y = (289.25, -216.21) 
[Sat Oct 15 21:40:23 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Oct 15 21:42:21 2011] Binned source spectrum to 10 counts/bin
[Sat Oct 15 21:42:21 2011] Setting source spectrum file to fullrun_mos1_xmm0606321301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Oct 15 21:42:21 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0606321301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Oct 15 22:22:23 2011] Updating aperture counts using extracted products
[Sat Oct 15 22:22:23 2011] Error reading totcts from fullrun_mos1_xmm0606321301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Oct 15 22:22:23 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 22:22:23 2011] Using photon index=1.80, rate=4.13, arf fullrun_mos1_xmm0606321301_pi300-10000_pass1_cl_src1.arf
[Sat Oct 15 22:22:23 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Oct 15 22:22:23 2011] Updating source flux to 3.8e-11
[Sat Oct 15 22:22:47 2011] Reading fit data from xmm0606321301/analysis//spectral/fullrun_mos1_xmm0606321301_pi300-10000_pass1_cl_src1_pl.csv
[Sat Oct 15 22:22:47 2011] Spectral fit parameter nH value = 1.86528e+14
[Sat Oct 15 22:22:47 2011] Spectral fit parameter PhoIndex value = 2.73844
[Sat Oct 15 22:22:47 2011] Failed to get F(0.3-8.0) from xmm0606321301/analysis//spectral/fullrun_mos1_xmm0606321301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Oct 15 22:22:47 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 22:22:47 2011] Using Nh = 1.9e+14, photon index=2.74, rate=4.13, arf fullrun_mos1_xmm0606321301_pi300-10000_pass1_cl_src1.arf
[Sat Oct 15 22:22:47 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Oct 15 22:22:47 2011] Updating source flux to 3e-11