[Thu Oct  6 02:27:47 2011] Detection parameters:
  Position = (294.2, 321.0) = 12 3 9.64 44 31 52.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31340.0 +/- 211.1
  Background counts = 86.2
  Rate = 1 +/- 0.008

[Thu Oct  6 02:27:47 2011] Off-axis axis estimate = 1.67'
[Thu Oct  6 04:12:27 2011] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 04:12:27 2011] Initial guess for spatial extent in simple fitting = 7.26"
[Thu Oct  6 04:12:27 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Thu Oct  6 04:12:27 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Thu Oct  6 04:31:36 2011] fullrun_mos2_xmm0606320401_pi300-10000_cl_pass0_src1.ximg exists
[Thu Oct  6 04:31:36 2011] fullrun_mos2_xmm0606320401_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Oct  6 04:31:36 2011] Fit fullrun_mos2_xmm0606320401_pi300-10000_cl_pass0_src1 appears to have run properly
[Thu Oct  6 04:31:36 2011] fullrun_mos2_xmm0606320401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct  6 04:31:36 2011] fullrun_mos2_xmm0606320401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct  6 04:31:36 2011] Fit fullrun_mos2_xmm0606320401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct  6 04:31:49 2011] Spatial fit model total counts = 22877.500000, observed total counts = 22901.000000
[Thu Oct  6 04:31:49 2011] Offset between fit and detection position for source 1 = 0.197038 pixels
[Thu Oct  6 04:31:49 2011] 22770.140000 total counts/ 4845.540000 bgd. counts: snr = 257.500681
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.197038 pixels
  Position = (294.0, 321.1) = 12 3 9.73 44 31 52.0
  Extent = 5.4 (5.3-5.4)", rotation angle = 0
  Source counts = 17924.6 +/- 150.9
  Background counts = 4845.5
  Rate = 0.9 +/- 0.008
[Thu Oct  6 04:31:49 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 04:31:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 04:31:49 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 04:31:49 2011] Source does appear to be extended
[Thu Oct  6 04:31:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 22:52:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 22:52:30 2011] Initial guess for spatial extent in simple fitting = 5.35"
[Thu Oct  6 22:52:30 2011] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.336
[Thu Oct  6 22:52:30 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.35"
[Thu Oct  6 23:07:26 2011] fullrun_mos2_xmm0606320401_pi300-10000_cl_pass1_src1.ximg exists
[Thu Oct  6 23:07:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0606320401_pi300-10000_cl_pass1_src1.csv
[Thu Oct  6 23:07:26 2011] fullrun_mos2_xmm0606320401_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Oct  6 23:07:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0606320401_pi300-10000_cl_pass1_src1.csv
[Thu Oct  6 23:07:26 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0606320401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0606320401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 23:07:26 2011] fullrun_mos2_xmm0606320401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct  6 23:07:26 2011] fullrun_mos2_xmm0606320401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct  6 23:07:26 2011] Fit fullrun_mos2_xmm0606320401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct  6 23:07:33 2011] Spatial fit model total counts = 22881.000000, observed total counts = 22901.000000
[Thu Oct  6 23:07:33 2011] Offset between fit and detection position for source 1 = 0.000021 pixels
[Thu Oct  6 23:07:33 2011] 22773.750000 total counts/ 4846.750000 bgd. counts: snr = 257.503009
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000021 pixels
  Position = (294.0, 321.1) = 12 3 9.73 44 31 52.0
  Extent = 5.4 (5.3-5.4)", rotation angle = 0
  Source counts = 17927.0 +/- 150.9
  Background counts = 4846.8
  Rate = 0.9 +/- 0.008
[Thu Oct  6 23:07:33 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 23:07:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 23:07:33 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 23:07:33 2011] Source does appear to be extended
[Thu Oct  6 23:07:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 06:01:24 2011] Counts = 17927.000000, rescaling region sizes by 3.000000
[Fri Oct  7 06:01:24 2011] XMMSAS src. selection expression = ellipse(25531.531040, 27884.829400, 963.343828, 963.343828, 0.000000, X, Y)
[Fri Oct  7 06:01:24 2011] Writing source region out to fullrun_mos2_xmm0606320401_pi300-10000_pass1_cl_src1_src.reg
[Fri Oct  7 06:01:24 2011] Extracting stamp from image fullrun_mos2_xmm0606320401_pi300-10000_cl_sm2.00.img.gz, (239, 266) - (349, 376)
[Fri Oct  7 06:01:24 2011] XMMSAS bgd. selection expression = annulus(25531.531040, 27884.829400, 4816.719139, 9633.438277, X, Y) && !ellipse(17406.778400, 23466.969400, 474.647214, 474.647214, 0.000000, X, Y) && !ellipse(33430.118469, 37022.134155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29731.973297, 37035.034943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26586.960999, 28059.081818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25760.076019, 28950.794647, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Oct  7 06:01:24 2011] Writing fullrun_mos2_xmm0606320401_pi300-10000_pass1_cl_src1.gif
[Fri Oct  7 06:01:29 2011] Mean detx,y = (130.12, 59.80) 
[Fri Oct  7 06:01:30 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Oct  7 06:04:56 2011] Binned source spectrum to 10 counts/bin
[Fri Oct  7 06:04:56 2011] Setting source spectrum file to fullrun_mos2_xmm0606320401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Oct  7 06:04:56 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0606320401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Oct  7 06:22:42 2011] Updating aperture counts using extracted products
[Fri Oct  7 06:22:42 2011] Error reading totcts from fullrun_mos2_xmm0606320401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Oct  7 06:22:42 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 06:22:42 2011] Using photon index=1.80, rate=0.941, arf fullrun_mos2_xmm0606320401_pi300-10000_pass1_cl_src1.arf
[Fri Oct  7 06:22:42 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Oct  7 06:22:42 2011] Updating source flux to 9.7e-12
[Fri Oct  7 06:23:39 2011] Reading fit data from xmm0606320401/analysis//spectral/fullrun_mos2_xmm0606320401_pi300-10000_pass1_cl_src1_pl.csv
[Fri Oct  7 06:23:39 2011] Spectral fit parameter nH value = 588354000000.0
[Fri Oct  7 06:23:39 2011] Spectral fit parameter PhoIndex value = 2.09193
[Fri Oct  7 06:23:39 2011] Failed to get F(0.3-8.0) from xmm0606320401/analysis//spectral/fullrun_mos2_xmm0606320401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Oct  7 06:23:39 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 06:23:39 2011] Using Nh = 5.9e+11, photon index=2.09, rate=0.941, arf fullrun_mos2_xmm0606320401_pi300-10000_pass1_cl_src1.arf
[Fri Oct  7 06:23:39 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Oct  7 06:23:39 2011] Updating source flux to 8.6e-12