[Wed Oct  5 13:54:40 2011] Detection parameters:
  Position = (326.0, 289.9) = 12 2 56.46 44 29 33.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 526.5 +/- 47.8
  Background counts = 844.2
  Rate = 0.03 +/- 0.002

[Wed Oct  5 13:54:40 2011] Off-axis axis estimate = 2.09'
[Wed Oct  5 14:03:32 2011] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 14:03:32 2011] Initial guess for spatial extent in simple fitting = 7.47"
[Wed Oct  5 14:03:32 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.813
[Wed Oct  5 14:03:32 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 7.47"
[Wed Oct  5 15:05:28 2011] fullrun_pn_xmm0606320301_pi300-10000_cl_pass0_src2.ximg exists
[Wed Oct  5 15:05:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0606320301_pi300-10000_cl_pass0_src2.csv
[Wed Oct  5 15:05:28 2011] fullrun_pn_xmm0606320301_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Oct  5 15:05:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0606320301_pi300-10000_cl_pass0_src2.csv
[Wed Oct  5 15:05:28 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0606320301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0606320301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 15:05:28 2011] fullrun_pn_xmm0606320301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Oct  5 15:05:28 2011] fullrun_pn_xmm0606320301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Oct  5 15:05:28 2011] Fit fullrun_pn_xmm0606320301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Oct  5 15:37:18 2011] Spatial fit model total counts = 7908.890000, observed total counts = 7979.000000
[Wed Oct  5 15:37:18 2011] Offset between fit and detection position for source 2 = 1.633874 pixels
[Wed Oct  5 15:37:18 2011] 7933.550000 total counts/ 5623.460000 bgd. counts: snr = 30.805417
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.633874 pixels
  Position = (326.0, 288.3) = 12 2 56.47 44 29 26.9
  Extent = 14.9 (14.9-29.9)", rotation angle = 0
  Source counts = 2310.1 +/- 89.1
  Background counts = 5623.5
  Rate = 0.08 +/- 0.003
[Wed Oct  5 15:37:18 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 15:37:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 15:37:18 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 15:37:18 2011] Source does appear to be extended
[Wed Oct  5 15:37:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 15:37:18 2011] Source is confused with source 1
[Wed Oct  5 15:37:26 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 15:37:26 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 15:37:26 2011] Initial guess for spatial extent in simple fitting = 14.95"
[Wed Oct  5 15:37:26 2011] source mask rpix=3.4, npix_max = 61, mask sum = 61, frac = 0.984
[Wed Oct  5 15:37:26 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 14.95"
[Wed Oct  5 16:16:07 2011] fullrun_pn_xmm0606320301_pi300-10000_cl_pass1_src2.ximg exists
[Wed Oct  5 16:16:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0606320301_pi300-10000_cl_pass1_src2.csv
[Wed Oct  5 16:16:07 2011] fullrun_pn_xmm0606320301_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Oct  5 16:16:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0606320301_pi300-10000_cl_pass1_src2.csv
[Wed Oct  5 16:16:07 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0606320301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0606320301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 16:16:07 2011] fullrun_pn_xmm0606320301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Oct  5 16:16:07 2011] fullrun_pn_xmm0606320301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Oct  5 16:16:07 2011] Fit fullrun_pn_xmm0606320301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Oct  5 17:09:22 2011] Warning, spatial fit 2 centroid is now closest to src. 5
[Wed Oct  5 17:09:22 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 17:09:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 17:09:22 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 17:09:22 2011] Source does appear to be extended
[Wed Oct  5 17:09:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 17:09:29 2011] Counts = 2310.090000, rescaling region sizes by 2.000000
[Wed Oct  5 17:09:29 2011] XMMSAS src. selection expression = ellipse(28309.953280, 25029.516000, 1793.796052, 1793.796052, 0.000000, X, Y)
[Wed Oct  5 17:09:29 2011] Writing source region out to fullrun_pn_xmm0606320301_pi300-10000_pass1_cl_src2_src.reg
[Wed Oct  5 17:09:29 2011] Extracting stamp from image fullrun_pn_xmm0606320301_pi300-10000_cl_sm2.00.img.gz, (223, 185) - (429, 391)
[Wed Oct  5 17:09:29 2011] XMMSAS bgd. selection expression = annulus(28309.953280, 25029.516000, 5979.320172, 11958.640344, X, Y) && !ellipse(28245.304000, 25258.084000, 2024.808058, 2024.808058, 0.000000, X, Y) && !ellipse(25497.695800, 27930.121600, 1618.963247, 1618.963247, 0.000000, X, Y) && !ellipse(29023.104000, 28219.816000, 1280.312037, 1280.312037, 0.000000, X, Y) && !ellipse(28348.090000, 27243.844800, 1205.696035, 1205.696035, 0.000000, X, Y) && !ellipse(24628.572000, 26180.956000, 1082.368031, 1082.368031, 0.000000, X, Y) && !ellipse(27980.816000, 29323.559800, 1288.792037, 630.362418, 42.687600, X, Y)
[Wed Oct  5 17:09:29 2011] Writing fullrun_pn_xmm0606320301_pi300-10000_pass1_cl_src2.gif
[Wed Oct  5 17:16:37 2011] Mean detx,y = (-1.35, 3170.99) 
[Wed Oct  5 17:16:42 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Oct  5 17:18:24 2011] Binned source spectrum to 10 counts/bin
[Wed Oct  5 17:18:25 2011] Setting source spectrum file to fullrun_pn_xmm0606320301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Oct  5 17:18:25 2011] Setting bgd. spectrum file to fullrun_pn_xmm0606320301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Oct  5 19:38:55 2011] Updating aperture counts using extracted products
[Wed Oct  5 19:38:55 2011] Error reading totcts from fullrun_pn_xmm0606320301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Oct  5 19:38:55 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 19:38:55 2011] Using photon index=1.80, rate=0.0779, arf fullrun_pn_xmm0606320301_pi300-10000_pass1_cl_src2.arf
[Wed Oct  5 19:38:55 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 19:38:55 2011] Updating source flux to 2.7e-13
[Wed Oct  5 19:39:35 2011] Flag c found in src. 2 procflags, skipping spectral fitting