[Wed Oct  5 20:37:04 2011] Detection parameters:
  Position = (201.5, 490.0) = 12 3 46.86 44 44 7.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.6 +/- 15.5
  Background counts = 75.9
  Rate = 0.002 +/- 0.0003

[Wed Oct  5 20:37:04 2011] Off-axis axis estimate = 15.56'
[Wed Oct  5 22:59:27 2011] Using EEF radius (= 14.21 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 22:59:27 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 22:59:27 2011] Initial guess for spatial extent in simple fitting = 14.21"
[Wed Oct  5 22:59:27 2011] source mask rpix=3.3, npix_max = 56, mask sum = 47, frac = 0.828
[Wed Oct  5 22:59:27 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 14.21"
[Wed Oct  5 23:53:17 2011] fullrun_mos2_xmm0606320201_pi300-10000_cl_pass0_src18.ximg exists
[Wed Oct  5 23:53:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0606320201_pi300-10000_cl_pass0_src18.csv
[Wed Oct  5 23:53:17 2011] fullrun_mos2_xmm0606320201_pi300-10000_cl_pass0_src18_1.ximg exists
[Wed Oct  5 23:53:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0606320201_pi300-10000_cl_pass0_src18.csv
[Wed Oct  5 23:53:17 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0606320201_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0606320201_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 23:53:18 2011] fullrun_mos2_xmm0606320201_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Wed Oct  5 23:53:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0606320201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Wed Oct  5 23:53:18 2011] fullrun_mos2_xmm0606320201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Oct  5 23:53:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0606320201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Wed Oct  5 23:53:18 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0606320201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0606320201_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 23:53:24 2011] Spatial fit model total counts = 187.197000, observed total counts = 234.000000
[Wed Oct  5 23:53:24 2011] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Oct  5 23:53:24 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 23:53:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 23:53:24 2011] Assessing source extent using major
[Wed Oct  5 23:53:24 2011] Source does appear to be extended
[Wed Oct  5 23:53:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 23:53:24 2011] Deleting source due to low Poisson probability 0.9