[Thu Jun 20 06:48:03 2013] Detection parameters:
  Position = (130.0, 334.0) = 8 23 10.97 -42 58 49.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1323.2 +/- 57.4
  Background counts = 728.6
  Rate = 0.04 +/- 0.002

[Thu Jun 20 06:49:05 2013] Off-axis axis estimate = 12.48'
[Thu Jun 20 06:53:54 2013] Using EEF radius (= 12.67 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 06:53:54 2013] Initial guess for spatial extent in simple fitting = 12.67"
[Thu Jun 20 06:53:54 2013] source mask rpix=2.9, npix_max = 46, mask sum = 29, frac = 0.622
[Thu Jun 20 06:53:54 2013] Giving source the simple spatial ID 83 for pass 0, mean size = 12.67"
[Thu Jun 20 06:54:02 2013] fullrun_mos1_xmm0606280201_pi300-10000_cl_pass0_src83.ximg exists
[Thu Jun 20 06:54:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606280201_pi300-10000_cl_pass0_src83.csv
[Thu Jun 20 06:54:02 2013] fullrun_mos1_xmm0606280201_pi300-10000_cl_pass0_src83_1.ximg exists
[Thu Jun 20 06:54:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606280201_pi300-10000_cl_pass0_src83.csv
[Thu Jun 20 06:54:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606280201_pi300-10000_cl_pass0_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606280201_pi300-10000_cl_pass0_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 06:54:05 2013] fullrun_mos1_xmm0606280201_pi300-10000_cl_pass0_tfrozen_src83.ximg exists
[Thu Jun 20 06:54:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606280201_pi300-10000_cl_pass0_tfrozen_src83.csv
[Thu Jun 20 06:54:05 2013] fullrun_mos1_xmm0606280201_pi300-10000_cl_pass0_tfrozen_src83_1.ximg exists
[Thu Jun 20 06:54:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606280201_pi300-10000_cl_pass0_tfrozen_src83.csv
[Thu Jun 20 06:54:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606280201_pi300-10000_cl_pass0_tfrozen_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606280201_pi300-10000_cl_pass0_tfrozen_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 06:55:02 2013] Warning, spatial fit 83 centroid is now closest to src. 65
[Thu Jun 20 06:55:03 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 06:55:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 06:55:03 2013] Assessing source extent using major
[Thu Jun 20 06:55:03 2013] Source does appear to be extended
[Thu Jun 20 06:55:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 06:55:04 2013] Source is confused with source 67
[Thu Jun 20 06:57:13 2013] Using EEF radius (= 12.67 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 06:57:13 2013] Initial guess for spatial extent in simple fitting = 12.67"
[Thu Jun 20 06:57:13 2013] source mask rpix=2.9, npix_max = 46, mask sum = 29, frac = 0.622
[Thu Jun 20 06:57:13 2013] Giving source the simple spatial ID 83 for pass 1, mean size = 12.67"
[Thu Jun 20 06:57:18 2013] fullrun_mos1_xmm0606280201_pi300-10000_cl_pass1_src83.ximg exists
[Thu Jun 20 06:57:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606280201_pi300-10000_cl_pass1_src83.csv
[Thu Jun 20 06:57:18 2013] fullrun_mos1_xmm0606280201_pi300-10000_cl_pass1_src83_1.ximg exists
[Thu Jun 20 06:57:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606280201_pi300-10000_cl_pass1_src83.csv
[Thu Jun 20 06:57:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606280201_pi300-10000_cl_pass1_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606280201_pi300-10000_cl_pass1_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 06:57:20 2013] fullrun_mos1_xmm0606280201_pi300-10000_cl_pass1_tfrozen_src83.ximg exists
[Thu Jun 20 06:57:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606280201_pi300-10000_cl_pass1_tfrozen_src83.csv
[Thu Jun 20 06:57:20 2013] fullrun_mos1_xmm0606280201_pi300-10000_cl_pass1_tfrozen_src83_1.ximg exists
[Thu Jun 20 06:57:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606280201_pi300-10000_cl_pass1_tfrozen_src83.csv
[Thu Jun 20 06:57:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606280201_pi300-10000_cl_pass1_tfrozen_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606280201_pi300-10000_cl_pass1_tfrozen_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 06:58:26 2013] Warning, spatial fit 83 centroid is now closest to src. 69
[Thu Jun 20 06:58:27 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 06:58:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 06:58:27 2013] Assessing source extent using major
[Thu Jun 20 06:58:27 2013] Source does appear to be extended
[Thu Jun 20 06:58:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 07:02:35 2013] Counts = 1323.182617, rescaling region sizes by 2.000000
[Thu Jun 20 07:02:35 2013] XMMSAS src. selection expression = ellipse(11257.228058, 29007.524658, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Jun 20 07:02:35 2013] Not overwriting source region fullrun_mos1_xmm0606280201_pi300-10000_pass1_cl_src68_src.reg
[Thu Jun 20 07:02:35 2013] Extracting stamp from image fullrun_mos1_xmm0606280201_pi300-10000_cl_sm2.00.img.gz, (55, 259) - (205, 409)
[Thu Jun 20 07:02:35 2013] XMMSAS bgd. selection expression = annulus(11257.228058, 29007.524658, 4350.000000, 8700.000000, X, Y) && !ellipse(22727.902000, 31805.150000, 9363.168269, 9363.168269, 0.000000, X, Y) && !ellipse(11542.656982, 24575.009003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19509.522000, 28045.948000, 1506.896043, 1506.896043, 0.000000, X, Y) && !ellipse(13121.834000, 26195.124000, 1900.536055, 1900.536055, 0.000000, X, Y) && !ellipse(23722.444000, 32782.290000, 9165.312264, 9165.312264, 0.000000, X, Y) && !ellipse(27101.450000, 43045.264000, 12722.784366, 12722.784366, 0.000000, X, Y) && !ellipse(11978.145508, 24750.880798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20171.124000, 27485.562000, 1456.216042, 1266.368036, 213.731000, X, Y) && !ellipse(17426.967600, 37694.445200, 1272.776037, 1272.776037, 0.000000, X, Y) && !ellipse(11323.395370, 24142.658722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19154.338000, 28256.870000, 1456.216042, 1456.216042, 0.000000, X, Y) && !ellipse(15831.287308, 34062.150848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18256.506000, 28568.487600, 873.784025, 873.784025, 0.000000, X, Y) && !ellipse(10322.793152, 27800.986420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10972.673302, 24054.118805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10648.293106, 29517.669952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19713.335739, 35538.838318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17958.184814, 38268.604034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11748.841248, 28324.563507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11064.237961, 28039.445221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17267.577179, 38384.817322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11579.567200, 23023.903717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18276.334320, 29187.450684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13321.104462, 24755.397003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12103.976639, 23524.790924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12456.779587, 26084.703796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11218.001328, 31532.906219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17367.942000, 19242.544000, 1753.008050, 1753.008050, 0.000000, X, Y) && !ellipse(10971.011917, 30832.878540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17779.273010, 28739.361389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17942.208176, 23021.368164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12517.895706, 26733.555786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17448.448395, 37028.646942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18265.276123, 35273.261047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11615.597275, 29835.338898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17006.172287, 23260.785431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13876.480835, 24928.263306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20506.874878, 35273.914185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10637.822334, 28842.060577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14149.934250, 22391.802307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17458.639725, 19953.212326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10404.861435, 24853.967621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11395.347992, 27799.826172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17599.024399, 29522.921600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12352.539154, 28318.032135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20742.445007, 32569.934113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18677.651291, 22915.607727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11504.443146, 33443.736115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10883.759026, 29903.883789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11209.547714, 31970.547974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18062.873947, 34751.019440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12778.849243, 27693.192230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11370.041580, 32493.761322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12005.558685, 23016.190857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16373.330124, 25002.022675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14339.200668, 25324.189240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15510.072571, 23276.418243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17026.400955, 33187.801910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15704.471161, 29789.390961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10044.051582, 25771.001465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18846.079712, 34319.401947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9819.894096, 25077.919342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12200.248001, 29612.449188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13831.370560, 21966.167923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10251.994804, 27280.401550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11854.575134, 27897.934814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17008.484818, 32660.637878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20304.993088, 22892.007172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16953.005325, 34494.920624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15596.489792, 25340.998230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14268.021988, 24747.580597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17918.911621, 31233.474670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15249.511978, 30111.464600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18734.783539, 35010.423767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14375.318359, 32640.770294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16877.295837, 32236.858032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16388.121292, 23434.692505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19966.541901, 34588.871490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17426.253677, 35403.516785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16205.488464, 35169.855621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17085.751480, 33961.166809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19409.016281, 29101.780853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19917.968140, 23314.082489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15109.019775, 25357.929352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12531.992584, 33546.695496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10951.320229, 31342.630890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18183.672470, 33388.378754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19782.029312, 26534.279907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17544.487442, 34317.108002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18332.525360, 33701.980194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17540.202225, 33524.560516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19628.621719, 34063.536774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18000.908218, 32499.732483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18459.735779, 31335.241943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17459.737579, 30385.649475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20475.126038, 22082.601578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12289.564514, 27470.145874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18225.887436, 30573.710510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17609.564865, 36234.917969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18320.938812, 19966.824661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13805.742889, 22554.791901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16692.419510, 33789.415619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15350.375214, 24923.964813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16817.119598, 26302.734802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10169.895988, 26580.984528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16733.701233, 29961.009399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19350.618912, 29793.535461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14860.528946, 23663.901184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18879.283508, 33199.409698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17003.862411, 20645.746185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11380.824982, 30503.769073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19240.905136, 34665.097382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12870.919022, 22768.715576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20175.747589, 30308.404053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20428.102814, 28788.521912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16934.364365, 20054.256104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19318.506332, 30214.981537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17775.048859, 31720.563690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17435.097580, 32829.922546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16481.732315, 21894.524612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19447.045593, 33284.198059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20665.122589, 34065.347504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13277.657562, 22086.963791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17299.061844, 21963.065521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16930.076492, 30389.366516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19175.140060, 21334.851074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13293.516052, 22573.401001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20282.074875, 31433.241730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17696.774612, 21797.167343, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 20 07:02:35 2013] Writing fullrun_mos1_xmm0606280201_pi300-10000_pass1_cl_src68.gif