[Thu Jun 20 06:48:29 2013] Detection parameters:
  Position = (380.3, 357.2) = 8 21 31.74 -42 57 12.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 864.7 +/- 46.7
  Background counts = 504.6
  Rate = 0.04 +/- 0.002

[Thu Jun 20 06:49:05 2013] Off-axis axis estimate = 7.31'
[Thu Jun 20 06:53:54 2013] Using EEF radius (= 10.08 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 06:53:54 2013] Initial guess for spatial extent in simple fitting = 10.08"
[Thu Jun 20 06:53:54 2013] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.756
[Thu Jun 20 06:53:54 2013] Giving source the simple spatial ID 84 for pass 0, mean size = 10.08"
[Thu Jun 20 06:54:02 2013] fullrun_mos1_xmm0606280201_pi300-10000_cl_pass0_src84.ximg exists
[Thu Jun 20 06:54:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606280201_pi300-10000_cl_pass0_src84.csv
[Thu Jun 20 06:54:02 2013] fullrun_mos1_xmm0606280201_pi300-10000_cl_pass0_src84_1.ximg exists
[Thu Jun 20 06:54:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606280201_pi300-10000_cl_pass0_src84.csv
[Thu Jun 20 06:54:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606280201_pi300-10000_cl_pass0_src84_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606280201_pi300-10000_cl_pass0_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 06:54:05 2013] fullrun_mos1_xmm0606280201_pi300-10000_cl_pass0_tfrozen_src84.ximg exists
[Thu Jun 20 06:54:05 2013] fullrun_mos1_xmm0606280201_pi300-10000_cl_pass0_tfrozen_src84_1.ximg exists
[Thu Jun 20 06:54:05 2013] Fit fullrun_mos1_xmm0606280201_pi300-10000_cl_pass0_tfrozen_src84 appears to have run properly
[Thu Jun 20 06:55:02 2013] Warning, spatial fit 84 centroid is now closest to src. 259
[Thu Jun 20 06:55:03 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 06:55:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 06:55:03 2013] Assessing source extent using major
[Thu Jun 20 06:55:03 2013] Source does appear to be extended
[Thu Jun 20 06:55:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 06:55:04 2013] Source is confused with source 266
[Thu Jun 20 06:55:04 2013] Source is confused with source 281
[Thu Jun 20 06:57:13 2013] Using EEF radius (= 10.08 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 06:57:13 2013] Initial guess for spatial extent in simple fitting = 10.08"
[Thu Jun 20 06:57:13 2013] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.756
[Thu Jun 20 06:57:13 2013] Giving source the simple spatial ID 84 for pass 1, mean size = 10.08"
[Thu Jun 20 06:57:18 2013] fullrun_mos1_xmm0606280201_pi300-10000_cl_pass1_src84.ximg exists
[Thu Jun 20 06:57:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606280201_pi300-10000_cl_pass1_src84.csv
[Thu Jun 20 06:57:18 2013] fullrun_mos1_xmm0606280201_pi300-10000_cl_pass1_src84_1.ximg exists
[Thu Jun 20 06:57:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606280201_pi300-10000_cl_pass1_src84.csv
[Thu Jun 20 06:57:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606280201_pi300-10000_cl_pass1_src84_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606280201_pi300-10000_cl_pass1_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 06:57:20 2013] fullrun_mos1_xmm0606280201_pi300-10000_cl_pass1_tfrozen_src84.ximg exists
[Thu Jun 20 06:57:20 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0606280201_pi300-10000_cl_pass1_tfrozen_src84.csv
[Thu Jun 20 06:57:20 2013] fullrun_mos1_xmm0606280201_pi300-10000_cl_pass1_tfrozen_src84_1.ximg exists
[Thu Jun 20 06:57:20 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0606280201_pi300-10000_cl_pass1_tfrozen_src84.csv
[Thu Jun 20 06:57:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606280201_pi300-10000_cl_pass1_tfrozen_src84_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606280201_pi300-10000_cl_pass1_tfrozen_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 06:58:26 2013] Warning, spatial fit 84 centroid is now closest to src. 271
[Thu Jun 20 06:58:27 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 06:58:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 06:58:27 2013] Assessing source extent using major
[Thu Jun 20 06:58:27 2013] Source does appear to be extended
[Thu Jun 20 06:58:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 07:02:35 2013] XMMSAS src. selection expression = ellipse(33037.065277, 31029.685242, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 20 07:02:35 2013] Not overwriting source region fullrun_mos1_xmm0606280201_pi300-10000_pass1_cl_src274_src.reg
[Thu Jun 20 07:02:35 2013] Extracting stamp from image fullrun_mos1_xmm0606280201_pi300-10000_cl_sm2.00.img.gz, (343, 320) - (418, 395)
[Thu Jun 20 07:02:35 2013] XMMSAS bgd. selection expression = annulus(33037.065277, 31029.685242, 1087.500000, 2175.000000, X, Y) && !ellipse(32842.924225, 28775.801666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32087.061279, 28979.511444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32523.703000, 32355.128200, 1651.144048, 803.680023, 13.192400, X, Y) && !ellipse(29763.874000, 34302.416000, 1594.688046, 1594.688046, 0.000000, X, Y) && !ellipse(22727.902000, 31805.150000, 9363.168269, 9363.168269, 0.000000, X, Y) && !ellipse(33069.886000, 32080.046000, 7364.472212, 7364.472212, 0.000000, X, Y) && !ellipse(23722.444000, 32782.290000, 9165.312264, 9165.312264, 0.000000, X, Y) && !ellipse(27101.450000, 43045.264000, 12722.784366, 12722.784366, 0.000000, X, Y) && !ellipse(33100.258000, 33599.236000, 592.570417, 592.570417, 0.000000, X, Y) && !ellipse(33024.129974, 29664.662994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33836.316711, 31229.563812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32347.814362, 33297.842255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33860.686600, 30095.738000, 1655.528048, 1655.528048, 0.000000, X, Y) && !ellipse(31881.288544, 33465.796753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31658.436005, 32623.215240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30176.465027, 28270.366394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29704.190000, 32706.802000, 9183.984264, 9183.984264, 0.000000, X, Y) && !ellipse(33916.641968, 30857.403046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31374.977112, 28400.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35400.667938, 32045.310944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33557.695282, 33023.888367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30307.440277, 31589.495514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30159.207336, 29583.437683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31051.233459, 32796.243500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32516.594574, 29569.458954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30047.656281, 30250.041199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30242.564636, 28796.964905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32268.837860, 31514.753784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34328.264435, 33805.300659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31174.243622, 29817.863495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30753.838318, 33467.381805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35386.372000, 35735.178000, 10959.024315, 10959.024315, 0.000000, X, Y) && !ellipse(34685.140198, 33022.128082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30029.944000, 35998.188000, 3184.576092, 3184.576092, 0.000000, X, Y)
[Thu Jun 20 07:02:35 2013] Writing fullrun_mos1_xmm0606280201_pi300-10000_pass1_cl_src274.gif