[Tue May  8 11:20:11 2012] Detection parameters:
  Position = (197.3, 260.1) = 10 57 3.34 57 41 22.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 517.6 +/- 29.5
  Background counts = 141.9
  Rate = 0.02 +/- 0.001

[Tue May  8 11:20:13 2012] Off-axis axis estimate = 7.84'
[Tue May  8 12:52:28 2012] Using EEF radius (= 10.35 ")to estimate initial spatial extent for simple fitting
[Tue May  8 12:52:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May  8 12:52:28 2012] Initial guess for spatial extent in simple fitting = 10.35"
[Tue May  8 12:52:28 2012] source mask rpix=2.4, npix_max = 33, mask sum = 35, frac = 1.056
[Tue May  8 12:52:28 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.35"
[Tue May  8 13:34:43 2012] fullrun_mos1_xmm0606030101_pi300-10000_cl_pass0_src1.ximg exists
[Tue May  8 13:34:43 2012] fullrun_mos1_xmm0606030101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May  8 13:34:43 2012] Fit fullrun_mos1_xmm0606030101_pi300-10000_cl_pass0_src1 appears to have run properly
[Tue May  8 13:34:43 2012] fullrun_mos1_xmm0606030101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May  8 13:34:43 2012] fullrun_mos1_xmm0606030101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May  8 13:34:43 2012] Fit fullrun_mos1_xmm0606030101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue May  8 14:21:58 2012] Spatial fit model total counts = 656.090000, observed total counts = 617.000000
[Tue May  8 14:21:58 2012] Offset between fit and detection position for source 1 = 0.221201 pixels
[Tue May  8 14:21:58 2012] 659.278000 total counts/ 359.248000 bgd. counts: snr = 15.829511
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.221201 pixels
  Position = (197.2, 260.2) = 10 57 3.42 57 41 21.2
  Extent = 5.3 (4.6-6.1)", rotation angle = 0
  Source counts = 300.0 +/- 25.7
  Background counts = 359.2
  Rate = 0.008 +/- 0.0007
[Tue May  8 14:21:58 2012] Vigneting correction estimate = 1.000000
[Tue May  8 14:21:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 14:21:58 2012] Assessing source extent using major axis lower bound
[Tue May  8 14:21:58 2012] Source does appear to be extended
[Tue May  8 14:21:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 15:35:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  8 15:35:58 2012] Initial guess for spatial extent in simple fitting = 5.34"
[Tue May  8 15:35:58 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.005
[Tue May  8 15:35:58 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.34"
[Tue May  8 16:10:28 2012] fullrun_mos1_xmm0606030101_pi300-10000_cl_pass1_src1.ximg exists
[Tue May  8 16:10:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606030101_pi300-10000_cl_pass1_src1.csv
[Tue May  8 16:10:28 2012] fullrun_mos1_xmm0606030101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May  8 16:10:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606030101_pi300-10000_cl_pass1_src1.csv
[Tue May  8 16:10:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606030101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606030101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 16:10:28 2012] fullrun_mos1_xmm0606030101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May  8 16:10:28 2012] fullrun_mos1_xmm0606030101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May  8 16:10:28 2012] Fit fullrun_mos1_xmm0606030101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue May  8 16:56:27 2012] Spatial fit model total counts = 584.770000, observed total counts = 550.000000
[Tue May  8 16:56:27 2012] Offset between fit and detection position for source 1 = 0.047194 pixels
[Tue May  8 16:56:27 2012] 585.378000 total counts/ 299.656000 bgd. counts: snr = 16.505633
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.047194 pixels
  Position = (197.2, 260.3) = 10 57 3.41 57 41 21.4
  Extent = 5.0 (4.4-5.7)", rotation angle = 0
  Source counts = 285.7 +/- 24.2
  Background counts = 299.7
  Rate = 0.008 +/- 0.0007
[Tue May  8 16:56:27 2012] Vigneting correction estimate = 1.000000
[Tue May  8 16:56:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 16:56:27 2012] Assessing source extent using major axis lower bound
[Tue May  8 16:56:27 2012] Source does appear to be extended
[Tue May  8 16:56:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 18:33:27 2012] XMMSAS src. selection expression = ellipse(17107.641380, 22596.915200, 298.722609, 298.722609, 0.000000, X, Y)
[Tue May  8 18:33:27 2012] Writing source region out to fullrun_mos1_xmm0606030101_pi300-10000_pass1_cl_src1_src.reg
[Tue May  8 18:33:27 2012] Extracting stamp from image fullrun_mos1_xmm0606030101_pi300-10000_cl_sm2.00.img.gz, (180, 243) - (214, 277)
[Tue May  8 18:33:27 2012] XMMSAS bgd. selection expression = annulus(17107.641380, 22596.915200, 497.871014, 995.742029, X, Y) && !ellipse(19117.862000, 20557.456000, 1647.664047, 1647.664047, 0.000000, X, Y)
[Tue May  8 18:33:27 2012] Writing fullrun_mos1_xmm0606030101_pi300-10000_pass1_cl_src1.gif
[Tue May  8 18:33:33 2012] Mean detx,y = (-6069.57, 6812.66) 
[Tue May  8 18:33:37 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 18:34:16 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 18:34:16 2012] Setting source spectrum file to fullrun_mos1_xmm0606030101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue May  8 18:34:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0606030101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue May  8 20:32:32 2012] Updating aperture counts using extracted products
[Tue May  8 20:32:32 2012] Error reading totcts from fullrun_mos1_xmm0606030101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue May  8 20:32:33 2012] Calculating source flux in energy range 0.30-8.00
[Tue May  8 20:32:33 2012] Using photon index=1.80, rate=0.00808, arf fullrun_mos1_xmm0606030101_pi300-10000_pass1_cl_src1.arf
[Tue May  8 20:32:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  8 20:32:33 2012] Updating source flux to 1.5e-13
[Tue May  8 20:33:57 2012] Reading fit data from xmm0606030101/analysis//spectral/fullrun_mos1_xmm0606030101_pi300-10000_pass1_cl_src1_pl.csv
[Tue May  8 20:33:57 2012] Spectral fit parameter nH value = 3.72771e+21
[Tue May  8 20:33:57 2012] Spectral fit parameter PhoIndex value = 4.47715
[Tue May  8 20:33:57 2012] Failed to get F(0.3-8.0) from xmm0606030101/analysis//spectral/fullrun_mos1_xmm0606030101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue May  8 20:33:57 2012] Calculating source flux in energy range 0.30-8.00
[Tue May  8 20:33:57 2012] Using Nh = 3.7e+21, photon index=4.48, rate=0.00808, arf fullrun_mos1_xmm0606030101_pi300-10000_pass1_cl_src1.arf
[Tue May  8 20:33:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  8 20:33:57 2012] Updating source flux to 9.7e-14