[Sun Mar 25 10:19:16 2012] Detection parameters: Position = (462.5, 198.0) = 18 9 4.64 -19 52 31.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 29.5 +/- 7.5 Background counts = 4.7 Rate = 0.003 +/- 0.0007 [Sun Mar 25 10:19:17 2012] Off-axis axis estimate = 13.94' [Sun Mar 25 10:48:44 2012] Using EEF radius (= 13.40 ")to estimate initial spatial extent for simple fitting [Sun Mar 25 10:48:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun Mar 25 10:48:44 2012] Initial guess for spatial extent in simple fitting = 13.40" [Sun Mar 25 10:48:44 2012] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.092 [Sun Mar 25 10:48:44 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 13.40" [Sun Mar 25 10:59:38 2012] fullrun_mos1_xmm0605990601_pi300-10000_cl_pass0_src3.ximg exists [Sun Mar 25 10:59:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605990601_pi300-10000_cl_pass0_src3.csv [Sun Mar 25 10:59:38 2012] fullrun_mos1_xmm0605990601_pi300-10000_cl_pass0_src3_1.ximg exists [Sun Mar 25 10:59:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605990601_pi300-10000_cl_pass0_src3.csv [Sun Mar 25 10:59:38 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0605990601_pi300-10000_cl_pass0_src3_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0605990601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Mar 25 10:59:38 2012] fullrun_mos1_xmm0605990601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists [Sun Mar 25 10:59:38 2012] fullrun_mos1_xmm0605990601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists [Sun Mar 25 10:59:38 2012] Fit fullrun_mos1_xmm0605990601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly [Sun Mar 25 11:17:07 2012] Spatial fit model total counts = 80.789200, observed total counts = 74.000000 [Sun Mar 25 11:17:07 2012] Offset between fit and detection position for source 4 = 0.471004 pixels [Sun Mar 25 11:17:07 2012] 81.317000 total counts/ 60.628500 bgd. counts: snr = 2.656994 Spatial fit parameters: Offset between fit and detection position for source 4 = 0.471004 pixels Position = (462.0, 198.2) = 18 9 4.78 -19 52 30.2 Extent = 5.8 (3.4-9.0)", rotation angle = 0 Source counts = 20.7 +/- 9.0 Background counts = 60.6 Rate = 0.002 +/- 0.0008 [Sun Mar 25 11:17:07 2012] Vigneting correction estimate = 1.000000 [Sun Mar 25 11:17:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Mar 25 11:17:07 2012] Assessing source extent using major axis lower bound [Sun Mar 25 11:17:07 2012] Source does appear to be extended [Sun Mar 25 11:17:07 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Mar 25 11:17:07 2012] Deleting source due to low Poisson probability 0.9