[Fri Apr  6 05:14:15 2012] Detection parameters:
  Position = (405.8, 473.9) = 1 22 57.17 -58 36 33.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 149.5 +/- 18.1
  Background counts = 54.5
  Rate = 0.001 +/- 0.0001

[Fri Apr  6 05:14:15 2012] Off-axis axis estimate = 14.91'
[Fri Apr  6 08:38:02 2012] Using EEF radius (= 13.88 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 08:38:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Apr  6 08:38:02 2012] Initial guess for spatial extent in simple fitting = 13.88"
[Fri Apr  6 08:38:02 2012] source mask rpix=3.2, npix_max = 54, mask sum = 53, frac = 0.972
[Fri Apr  6 08:38:02 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 13.88"
[Fri Apr  6 09:18:41 2012] fullrun_mos2_xmm0605800401_pi300-10000_cl_pass0_src21.ximg exists
[Fri Apr  6 09:18:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605800401_pi300-10000_cl_pass0_src21.csv
[Fri Apr  6 09:18:41 2012] fullrun_mos2_xmm0605800401_pi300-10000_cl_pass0_src21_1.ximg exists
[Fri Apr  6 09:18:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605800401_pi300-10000_cl_pass0_src21.csv
[Fri Apr  6 09:18:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0605800401_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0605800401_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 09:18:41 2012] fullrun_mos2_xmm0605800401_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Fri Apr  6 09:18:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605800401_pi300-10000_cl_pass0_tfrozen_src21.csv
[Fri Apr  6 09:18:41 2012] fullrun_mos2_xmm0605800401_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Fri Apr  6 09:18:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605800401_pi300-10000_cl_pass0_tfrozen_src21.csv
[Fri Apr  6 09:18:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0605800401_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0605800401_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 09:18:49 2012] Spatial fit model total counts = 716.314000, observed total counts = 699.000000
[Fri Apr  6 09:18:49 2012] Offset between fit and detection position for source 4 = 8.491034 pixels
[Fri Apr  6 09:18:49 2012] Warning, changing simple spatial fit ID from 21 to 17
[Fri Apr  6 09:18:49 2012] 713.956018 total counts/ 713.956000 bgd. counts: snr = 0.000001
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 8.491034 pixels
  Position = (400.9, 466.9) = 1 22 59.84 -58 37 4.6
  Extent = 25.9 (3.2-48.6)", rotation angle = 0
  Source counts = 0.0 +/- 26.7
  Background counts = 714.0
  Rate = 1e-10 +/- 0.0002
  Deleting source due to low Poisson probability