[Sat Dec 17 22:33:37 2011] Detection parameters:
  Position = (381.1, 267.0) = 19 15 11.83 -24 14 21.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 614.6 +/- 31.5
  Background counts = 38.1
  Rate = 0.04 +/- 0.002

[Sat Dec 17 22:33:39 2011] Off-axis axis estimate = 6.41'
[Sat Dec 17 22:36:52 2011] Using EEF radius (= 9.64 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 22:36:52 2011] Initial guess for spatial extent in simple fitting = 9.64"
[Sat Dec 17 22:36:52 2011] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.221
[Sat Dec 17 22:36:52 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 9.64"
[Sat Dec 17 23:46:04 2011] fullrun_pn_xmm0605581501_pi300-10000_cl_pass0_src3.ximg exists
[Sat Dec 17 23:46:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605581501_pi300-10000_cl_pass0_src3.csv
[Sat Dec 17 23:46:04 2011] fullrun_pn_xmm0605581501_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Dec 17 23:46:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605581501_pi300-10000_cl_pass0_src3.csv
[Sat Dec 17 23:46:04 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0605581501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0605581501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 23:46:05 2011] fullrun_pn_xmm0605581501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Dec 17 23:46:05 2011] fullrun_pn_xmm0605581501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Dec 17 23:46:05 2011] Fit fullrun_pn_xmm0605581501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Dec 18 01:10:29 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.742031 pixels away
[Sun Dec 18 01:10:29 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 01:10:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 01:10:29 2011] Assessing source extent using major
[Sun Dec 18 01:10:29 2011] Source does appear to be extended
[Sun Dec 18 01:10:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 01:10:51 2011] Using EEF radius (= 9.64 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 01:10:51 2011] Initial guess for spatial extent in simple fitting = 9.64"
[Sun Dec 18 01:10:51 2011] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.221
[Sun Dec 18 01:10:51 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 9.64"
[Sun Dec 18 02:26:17 2011] fullrun_pn_xmm0605581501_pi300-10000_cl_pass1_src3.ximg exists
[Sun Dec 18 02:26:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605581501_pi300-10000_cl_pass1_src3.csv
[Sun Dec 18 02:26:17 2011] fullrun_pn_xmm0605581501_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Dec 18 02:26:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605581501_pi300-10000_cl_pass1_src3.csv
[Sun Dec 18 02:26:17 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0605581501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0605581501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 02:26:18 2011] fullrun_pn_xmm0605581501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Dec 18 02:26:18 2011] fullrun_pn_xmm0605581501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Dec 18 02:26:18 2011] Fit fullrun_pn_xmm0605581501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Dec 18 04:14:12 2011] Spatial fit model total counts = 921.326000, observed total counts = 917.000000
[Sun Dec 18 04:14:12 2011] Offset between fit and detection position for source 3 = 0.116057 pixels
[Sun Dec 18 04:14:12 2011] 923.738000 total counts/ 487.686000 bgd. counts: snr = 19.745500
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.116057 pixels
  Position = (381.0, 267.0) = 19 15 11.86 -24 14 20.9
  Extent = 5.5 (5.0-6.1)", rotation angle = 0
  Source counts = 436.1 +/- 30.4
  Background counts = 487.7
  Rate = 0.02 +/- 0.001
[Sun Dec 18 04:14:12 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 04:14:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 04:14:12 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 04:14:12 2011] Source does appear to be extended
[Sun Dec 18 04:14:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 04:14:43 2011] XMMSAS src. selection expression = ellipse(33100.449138, 23181.958000, 331.092010, 331.092010, 0.000000, X, Y)
[Sun Dec 18 04:14:43 2011] Writing source region out to fullrun_pn_xmm0605581501_pi300-10000_pass1_cl_src3_src.reg
[Sun Dec 18 04:14:43 2011] Extracting stamp from image fullrun_pn_xmm0605581501_pi300-10000_cl_sm2.00.img.gz, (362, 248) - (400, 286)
[Sun Dec 18 04:14:43 2011] XMMSAS bgd. selection expression = annulus(33100.449138, 23181.958000, 551.820016, 1103.640032, X, Y)
[Sun Dec 18 04:14:43 2011] Writing fullrun_pn_xmm0605581501_pi300-10000_pass1_cl_src3.gif
[Sun Dec 18 04:20:23 2011] Mean detx,y = (6395.85, 3352.60) 
[Sun Dec 18 04:20:28 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 18 04:20:49 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 18 04:20:50 2011] Setting source spectrum file to fullrun_pn_xmm0605581501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Dec 18 04:20:50 2011] Setting bgd. spectrum file to fullrun_pn_xmm0605581501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Dec 18 06:42:13 2011] Updating aperture counts using extracted products
[Sun Dec 18 06:42:14 2011] Error reading totcts from fullrun_pn_xmm0605581501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Dec 18 06:42:15 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 06:42:15 2011] Using photon index=1.80, rate=0.0198, arf fullrun_pn_xmm0605581501_pi300-10000_pass1_cl_src3.arf
[Sun Dec 18 06:42:15 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 06:42:16 2011] Updating source flux to 7.8e-14
[Sun Dec 18 06:49:24 2011] Reading fit data from xmm0605581501/analysis//spectral/fullrun_pn_xmm0605581501_pi300-10000_pass1_cl_src3_pl.csv
[Sun Dec 18 06:49:24 2011] Spectral fit parameter nH value = 1.10115e+21
[Sun Dec 18 06:49:24 2011] Spectral fit parameter PhoIndex value = 2.13636
[Sun Dec 18 06:49:24 2011] Failed to get F(0.3-8.0) from xmm0605581501/analysis//spectral/fullrun_pn_xmm0605581501_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sun Dec 18 06:49:24 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 06:49:24 2011] Using Nh = 1.1e+21, photon index=2.14, rate=0.0198, arf fullrun_pn_xmm0605581501_pi300-10000_pass1_cl_src3.arf
[Sun Dec 18 06:49:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 06:49:24 2011] Updating source flux to 8e-14