[Sat Dec 17 22:33:38 2011] Detection parameters:
  Position = (421.9, 286.9) = 19 14 58.86 -24 12 52.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 200.9 +/- 20.4
  Background counts = 37.1
  Rate = 0.02 +/- 0.002

[Sat Dec 17 22:33:39 2011] Off-axis axis estimate = 8.99'
[Sat Dec 17 22:36:52 2011] Using EEF radius (= 10.92 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 22:36:52 2011] Initial guess for spatial extent in simple fitting = 10.92"
[Sat Dec 17 22:36:52 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.993
[Sat Dec 17 22:36:52 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 10.92"
[Sat Dec 17 23:46:04 2011] fullrun_pn_xmm0605581501_pi300-10000_cl_pass0_src11.ximg exists
[Sat Dec 17 23:46:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605581501_pi300-10000_cl_pass0_src11.csv
[Sat Dec 17 23:46:04 2011] fullrun_pn_xmm0605581501_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Dec 17 23:46:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605581501_pi300-10000_cl_pass0_src11.csv
[Sat Dec 17 23:46:04 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0605581501_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0605581501_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 23:46:05 2011] fullrun_pn_xmm0605581501_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Dec 17 23:46:05 2011] fullrun_pn_xmm0605581501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Dec 17 23:46:05 2011] Fit fullrun_pn_xmm0605581501_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Dec 18 01:10:29 2011] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 13.849437 pixels away
[Sun Dec 18 01:10:29 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 01:10:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 01:10:29 2011] Assessing source extent using major
[Sun Dec 18 01:10:29 2011] Source does appear to be extended
[Sun Dec 18 01:10:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 01:10:51 2011] Using EEF radius (= 10.92 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 01:10:51 2011] Initial guess for spatial extent in simple fitting = 10.92"
[Sun Dec 18 01:10:51 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.993
[Sun Dec 18 01:10:51 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 10.92"
[Sun Dec 18 02:26:17 2011] fullrun_pn_xmm0605581501_pi300-10000_cl_pass1_src11.ximg exists
[Sun Dec 18 02:26:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605581501_pi300-10000_cl_pass1_src11.csv
[Sun Dec 18 02:26:17 2011] fullrun_pn_xmm0605581501_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun Dec 18 02:26:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605581501_pi300-10000_cl_pass1_src11.csv
[Sun Dec 18 02:26:17 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0605581501_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0605581501_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 02:26:18 2011] fullrun_pn_xmm0605581501_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun Dec 18 02:26:18 2011] fullrun_pn_xmm0605581501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Dec 18 02:26:18 2011] Fit fullrun_pn_xmm0605581501_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sun Dec 18 04:14:12 2011] Spatial fit model total counts = 1197.960000, observed total counts = 1228.000000
[Sun Dec 18 04:14:12 2011] Offset between fit and detection position for source 11 = 8.887903 pixels
[Sun Dec 18 04:14:12 2011] 1001.581940 total counts/ 7.565940 bgd. counts: snr = 361.378182
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 8.887903 pixels
  Position = (421.9, 295.8) = 19 14 58.88 -24 12 15.4
  Extent = 21.8 (21.8-43.7)", rotation angle = 0
  Source counts = 994.0 +/- 31.6
  Background counts = 7.6
  Rate = 0.05 +/- 0.001
[Sun Dec 18 04:14:12 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 04:14:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 04:14:12 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 04:14:12 2011] Source does appear to be extended
[Sun Dec 18 04:14:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 04:14:43 2011] XMMSAS src. selection expression = ellipse(36655.977040, 25689.294000, 1310.892038, 1310.892038, 0.000000, X, Y)
[Sun Dec 18 04:14:43 2011] Writing source region out to fullrun_pn_xmm0605581501_pi300-10000_pass1_cl_src11_src.reg
[Sun Dec 18 04:14:43 2011] Extracting stamp from image fullrun_pn_xmm0605581501_pi300-10000_cl_sm2.00.img.gz, (347, 220) - (497, 371)
[Sun Dec 18 04:14:43 2011] XMMSAS bgd. selection expression = annulus(36655.977040, 25689.294000, 2184.820063, 4369.640126, X, Y) && !ellipse(36657.375610, 24230.176453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33100.449138, 23181.958000, 441.456013, 441.456013, 0.000000, X, Y) && !ellipse(35082.465332, 30859.920013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35046.468000, 24920.475600, 630.998418, 630.998418, 0.000000, X, Y)
[Sun Dec 18 04:14:43 2011] Writing fullrun_pn_xmm0605581501_pi300-10000_pass1_cl_src11.gif
[Sun Dec 18 04:29:42 2011] Mean detx,y = (9732.94, 762.03) 
[Sun Dec 18 04:29:50 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 18 04:31:03 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 18 04:31:03 2011] Setting source spectrum file to fullrun_pn_xmm0605581501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Dec 18 04:31:03 2011] Setting bgd. spectrum file to fullrun_pn_xmm0605581501_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun Dec 18 06:42:14 2011] Updating aperture counts using extracted products
[Sun Dec 18 06:42:14 2011] Error reading totcts from fullrun_pn_xmm0605581501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Dec 18 06:42:16 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 06:42:16 2011] Using photon index=1.80, rate=0.0451, arf fullrun_pn_xmm0605581501_pi300-10000_pass1_cl_src11.arf
[Sun Dec 18 06:42:16 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 06:42:16 2011] Updating source flux to 1.6e-13