[Sat Dec 17 22:34:33 2011] Detection parameters:
  Position = (422.1, 287.0) = 19 14 58.80 -24 12 52.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.9 +/- 12.4
  Background counts = 11.2
  Rate = 0.005 +/- 0.0008

[Sat Dec 17 22:34:33 2011] Off-axis axis estimate = 9.01'
[Sun Dec 18 00:37:32 2011] Using EEF radius (= 10.93 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 00:37:32 2011] Initial guess for spatial extent in simple fitting = 10.93"
[Sun Dec 18 00:37:32 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.991
[Sun Dec 18 00:37:32 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 10.93"
[Sun Dec 18 01:10:17 2011] fullrun_mos2_xmm0605581501_pi300-10000_cl_pass0_src8.ximg exists
[Sun Dec 18 01:10:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605581501_pi300-10000_cl_pass0_src8.csv
[Sun Dec 18 01:10:17 2011] fullrun_mos2_xmm0605581501_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun Dec 18 01:10:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605581501_pi300-10000_cl_pass0_src8.csv
[Sun Dec 18 01:10:17 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0605581501_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0605581501_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 01:10:17 2011] fullrun_mos2_xmm0605581501_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun Dec 18 01:10:17 2011] fullrun_mos2_xmm0605581501_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun Dec 18 01:10:17 2011] Fit fullrun_mos2_xmm0605581501_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Sun Dec 18 01:10:37 2011] Spatial fit model total counts = 416.107000, observed total counts = 435.000000
[Sun Dec 18 01:10:37 2011] Offset between fit and detection position for source 8 = 7.973660 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 7.973660 pixels
  Position = (422.0, 294.9) = 19 14 58.83 -24 12 19.3
  Extent = 21.8 (21.8-21.8)", rotation angle = 0
  Source counts = 348.6 +/- 18.7
  Background counts = 0.0
  Rate = 0.01 +/- 0.0008
 Deleting source due to low signal-to-noise ratio