[Sun Jan  1 16:47:55 2012] Detection parameters:
  Position = (337.6, 176.0) = 19 15 25.53 -24 20 57.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 26.6 +/- 7.2
  Background counts = 7.3
  Rate = 0.003 +/- 0.0007

[Sun Jan  1 16:47:55 2012] Off-axis axis estimate = 9.32'
[Sun Jan  1 19:15:20 2012] Using EEF radius (= 11.09 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 19:15:20 2012] Initial guess for spatial extent in simple fitting = 11.09"
[Sun Jan  1 19:15:20 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.968
[Sun Jan  1 19:15:20 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 11.09"
[Sun Jan  1 19:59:42 2012] fullrun_mos2_xmm0605581301_pi300-10000_cl_pass0_src17.ximg exists
[Sun Jan  1 19:59:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605581301_pi300-10000_cl_pass0_src17.csv
[Sun Jan  1 19:59:42 2012] fullrun_mos2_xmm0605581301_pi300-10000_cl_pass0_src17_1.ximg exists
[Sun Jan  1 19:59:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605581301_pi300-10000_cl_pass0_src17.csv
[Sun Jan  1 19:59:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0605581301_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0605581301_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 19:59:42 2012] fullrun_mos2_xmm0605581301_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sun Jan  1 19:59:42 2012] fullrun_mos2_xmm0605581301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sun Jan  1 19:59:42 2012] Fit fullrun_mos2_xmm0605581301_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Sun Jan  1 20:00:07 2012] Spatial fit model total counts = 96.980800, observed total counts = 97.000000
[Sun Jan  1 20:00:07 2012] Offset between fit and detection position for source 22 = 0.127682 pixels
[Sun Jan  1 20:00:07 2012] 97.771800 total counts/ 86.838500 bgd. counts: snr = 1.173262
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.127682 pixels
  Position = (337.7, 176.1) = 19 15 25.52 -24 20 56.1
  Extent = 2.8" x 2.8", rotation angle = 0
  Source counts = 10.9 +/- 9.9
  Background counts = 86.8
  Rate = 0.0006 +/- 0.0006
  Deleting source due to low Poisson probability