[Sun Jan  1 16:47:54 2012] Detection parameters:
  Position = (326.2, 319.0) = 19 15 29.19 -24 10 34.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.4 +/- 10.8
  Background counts = 9.3
  Rate = 0.004 +/- 0.0007

[Sun Jan  1 16:47:55 2012] Off-axis axis estimate = 2.50'
[Sun Jan  1 19:15:20 2012] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 19:15:20 2012] Initial guess for spatial extent in simple fitting = 7.68"
[Sun Jan  1 19:15:20 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.779
[Sun Jan  1 19:15:20 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.68"
[Sun Jan  1 19:59:42 2012] fullrun_mos2_xmm0605581301_pi300-10000_cl_pass0_src11.ximg exists
[Sun Jan  1 19:59:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605581301_pi300-10000_cl_pass0_src11.csv
[Sun Jan  1 19:59:42 2012] fullrun_mos2_xmm0605581301_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Jan  1 19:59:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605581301_pi300-10000_cl_pass0_src11.csv
[Sun Jan  1 19:59:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0605581301_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0605581301_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 19:59:42 2012] fullrun_mos2_xmm0605581301_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Jan  1 19:59:42 2012] fullrun_mos2_xmm0605581301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Jan  1 19:59:42 2012] Fit fullrun_mos2_xmm0605581301_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Jan  1 20:00:07 2012] Warning, spatial fit 11 centroid is now closest to src. 2
[Sun Jan  1 20:00:07 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 20:00:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 20:00:07 2012] Assessing source extent using major
[Sun Jan  1 20:00:07 2012] Source does appear to be extended
[Sun Jan  1 20:00:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 22:10:23 2012] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 22:10:23 2012] Initial guess for spatial extent in simple fitting = 7.68"
[Sun Jan  1 22:10:23 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.779
[Sun Jan  1 22:10:23 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 7.68"
[Sun Jan  1 22:56:35 2012] fullrun_mos2_xmm0605581301_pi300-10000_cl_pass1_src10.ximg exists
[Sun Jan  1 22:56:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605581301_pi300-10000_cl_pass1_src10.csv
[Sun Jan  1 22:56:35 2012] fullrun_mos2_xmm0605581301_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun Jan  1 22:56:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605581301_pi300-10000_cl_pass1_src10.csv
[Sun Jan  1 22:56:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0605581301_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0605581301_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 22:56:35 2012] fullrun_mos2_xmm0605581301_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun Jan  1 22:56:35 2012] fullrun_mos2_xmm0605581301_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Jan  1 22:56:35 2012] Fit fullrun_mos2_xmm0605581301_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sun Jan  1 22:56:58 2012] Spatial fit model total counts = 177.000000, observed total counts = 177.000000
[Sun Jan  1 22:56:58 2012] Offset between fit and detection position for source 18 = 0.235118 pixels
[Sun Jan  1 22:56:58 2012] 175.733700 total counts/ 131.471000 bgd. counts: snr = 3.860317
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.235118 pixels
  Position = (326.0, 319.1) = 19 15 29.24 -24 10 33.8
  Extent = 3.4 (2.7-4.5)", rotation angle = 0
  Source counts = 44.3 +/- 13.3
  Background counts = 131.5
  Rate = 0.003 +/- 0.0008
[Sun Jan  1 22:56:58 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 22:56:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 22:56:58 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 22:56:58 2012] Source does appear to be extended
[Sun Jan  1 22:56:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 00:21:44 2012] XMMSAS src. selection expression = ellipse(28315.707020, 27717.342800, 204.715206, 204.715206, 0.000000, X, Y)
[Mon Jan  2 00:21:44 2012] Writing source region out to fullrun_mos2_xmm0605581301_pi300-10000_pass1_cl_src18_src.reg
[Mon Jan  2 00:21:44 2012] Extracting stamp from image fullrun_mos2_xmm0605581301_pi300-10000_cl_sm2.00.img.gz, (314, 307) - (338, 331)
[Mon Jan  2 00:21:44 2012] XMMSAS bgd. selection expression = annulus(28315.707020, 27717.342800, 341.192010, 682.384020, X, Y) && !ellipse(27768.863220, 26776.901794, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jan  2 00:21:44 2012] Writing fullrun_mos2_xmm0605581301_pi300-10000_pass1_cl_src18.gif
[Mon Jan  2 00:25:42 2012] Mean detx,y = (-951.04, 474.48) 
[Mon Jan  2 00:25:44 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 00:25:58 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 00:25:58 2012] Setting source spectrum file to fullrun_mos2_xmm0605581301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon Jan  2 00:25:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0605581301_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Mon Jan  2 00:44:49 2012] Not generating rmf since there are only 44 counts
[Mon Jan  2 00:44:49 2012] rmf not generated due to insufficient counts
[Mon Jan  2 00:46:27 2012] Updating aperture counts using extracted products
[Mon Jan  2 00:46:27 2012] Error reading totcts from fullrun_mos2_xmm0605581301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon Jan  2 00:46:28 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jan  2 00:46:28 2012] Using photon index=1.80, rate=0.00251, arf fullrun_mos2_xmm0605581301_pi300-10000_pass1_cl_src18.arf
[Mon Jan  2 00:46:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jan  2 00:46:28 2012] Updating source flux to 3.5e-14
[Mon Jan  2 00:47:21 2012] Source 18 has fewer than 100.000000 counts, skipping spectral fitting