[Sun Jan  1 16:47:08 2012] Detection parameters:
  Position = (326.1, 294.8) = 19 15 29.23 -24 12 19.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.9 +/- 10.5
  Background counts = 9.1
  Rate = 0.004 +/- 0.0006

[Sun Jan  1 16:47:09 2012] Off-axis axis estimate = 2.02'
[Sun Jan  1 18:20:33 2012] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 18:20:33 2012] Initial guess for spatial extent in simple fitting = 7.44"
[Sun Jan  1 18:20:33 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.819
[Sun Jan  1 18:20:33 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 7.44"
[Sun Jan  1 19:15:20 2012] fullrun_mos1_xmm0605581301_pi300-10000_cl_pass0_src12.ximg exists
[Sun Jan  1 19:15:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605581301_pi300-10000_cl_pass0_src12.csv
[Sun Jan  1 19:15:20 2012] fullrun_mos1_xmm0605581301_pi300-10000_cl_pass0_src12_1.ximg exists
[Sun Jan  1 19:15:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605581301_pi300-10000_cl_pass0_src12.csv
[Sun Jan  1 19:15:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605581301_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605581301_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 19:15:20 2012] fullrun_mos1_xmm0605581301_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sun Jan  1 19:15:20 2012] fullrun_mos1_xmm0605581301_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sun Jan  1 19:15:20 2012] Fit fullrun_mos1_xmm0605581301_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Sun Jan  1 20:00:01 2012] Spatial fit model total counts = 163.000000, observed total counts = 163.000000
[Sun Jan  1 20:00:01 2012] Offset between fit and detection position for source 13 = 0.380486 pixels
[Sun Jan  1 20:00:01 2012] 167.279000 total counts/ 118.904000 bgd. counts: snr = 4.436319
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.380486 pixels
  Position = (325.9, 294.4) = 19 15 29.29 -24 12 21.3
  Extent = 6.2 (4.1-8.5)", rotation angle = 0
  Source counts = 48.4 +/- 12.9
  Background counts = 118.9
  Rate = 0.003 +/- 0.0007
[Sun Jan  1 20:00:01 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 20:00:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 20:00:01 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 20:00:01 2012] Source does appear to be extended
[Sun Jan  1 20:00:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 21:16:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jan  1 21:16:20 2012] Initial guess for spatial extent in simple fitting = 6.25"
[Sun Jan  1 21:16:20 2012] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.066
[Sun Jan  1 21:16:20 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 6.25"
[Sun Jan  1 22:10:22 2012] fullrun_mos1_xmm0605581301_pi300-10000_cl_pass1_src11.ximg exists
[Sun Jan  1 22:10:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605581301_pi300-10000_cl_pass1_src11.csv
[Sun Jan  1 22:10:22 2012] fullrun_mos1_xmm0605581301_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun Jan  1 22:10:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605581301_pi300-10000_cl_pass1_src11.csv
[Sun Jan  1 22:10:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605581301_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605581301_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 22:10:23 2012] fullrun_mos1_xmm0605581301_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun Jan  1 22:10:23 2012] fullrun_mos1_xmm0605581301_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Jan  1 22:10:23 2012] Fit fullrun_mos1_xmm0605581301_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sun Jan  1 22:56:51 2012] Warning, spatial fit 11 centroid is now closest to src. 11
[Sun Jan  1 22:56:51 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 22:56:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 22:56:51 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 22:56:51 2012] Source does appear to be extended
[Sun Jan  1 22:56:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 00:05:29 2012] XMMSAS src. selection expression = ellipse(28302.808580, 25567.219200, 374.972191, 374.972191, 0.000000, X, Y)
[Mon Jan  2 00:05:29 2012] Writing source region out to fullrun_mos1_xmm0605581301_pi300-10000_pass1_cl_src13_src.reg
[Mon Jan  2 00:05:29 2012] Extracting stamp from image fullrun_mos1_xmm0605581301_pi300-10000_cl_sm2.00.img.gz, (304, 273) - (347, 316)
[Mon Jan  2 00:05:29 2012] XMMSAS bgd. selection expression = annulus(28302.808580, 25567.219200, 624.953652, 1249.907305, X, Y) && !ellipse(27705.538116, 26750.001038, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jan  2 00:05:29 2012] Writing fullrun_mos1_xmm0605581301_pi300-10000_pass1_cl_src13.gif
[Mon Jan  2 00:10:37 2012] Mean detx,y = (-1463.49, 1050.89) 
[Mon Jan  2 00:10:39 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 00:10:52 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 00:10:52 2012] Setting source spectrum file to fullrun_mos1_xmm0605581301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Mon Jan  2 00:10:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0605581301_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Mon Jan  2 00:20:30 2012] Not generating rmf since there are only 48 counts
[Mon Jan  2 00:20:30 2012] rmf not generated due to insufficient counts
[Mon Jan  2 00:46:25 2012] Updating aperture counts using extracted products
[Mon Jan  2 00:46:25 2012] Error reading totcts from fullrun_mos1_xmm0605581301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Mon Jan  2 00:46:26 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jan  2 00:46:26 2012] Using photon index=1.80, rate=0.00275, arf fullrun_mos1_xmm0605581301_pi300-10000_pass1_cl_src13.arf
[Mon Jan  2 00:46:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jan  2 00:46:26 2012] Updating source flux to 3.2e-14
[Mon Jan  2 00:46:30 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting