[Sun Jan  1 16:47:08 2012] Detection parameters:
  Position = (421.2, 278.9) = 19 14 58.96 -24 13 28.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 709.8 +/- 33.1
  Background counts = 8.2
  Rate = 0.08 +/- 0.004

[Sun Jan  1 16:47:09 2012] Off-axis axis estimate = 9.01'
[Sun Jan  1 18:20:33 2012] Using EEF radius (= 10.94 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 18:20:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jan  1 18:20:33 2012] Initial guess for spatial extent in simple fitting = 10.94"
[Sun Jan  1 18:20:33 2012] source mask rpix=2.5, npix_max = 36, mask sum = 35, frac = 0.963
[Sun Jan  1 18:20:33 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.94"
[Sun Jan  1 19:15:20 2012] fullrun_mos1_xmm0605581301_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jan  1 19:15:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605581301_pi300-10000_cl_pass0_src1.csv
[Sun Jan  1 19:15:20 2012] fullrun_mos1_xmm0605581301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jan  1 19:15:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605581301_pi300-10000_cl_pass0_src1.csv
[Sun Jan  1 19:15:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605581301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605581301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 19:15:20 2012] fullrun_mos1_xmm0605581301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jan  1 19:15:20 2012] fullrun_mos1_xmm0605581301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jan  1 19:15:20 2012] Fit fullrun_mos1_xmm0605581301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jan  1 20:00:01 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.981310 pixels away
[Sun Jan  1 20:00:01 2012] Spatial fit model total counts = 418.256000, observed total counts = 458.000000
[Sun Jan  1 20:00:01 2012] Offset between fit and detection position for source 1 = 1.570903 pixels
[Sun Jan  1 20:00:01 2012] Warning, changing simple spatial fit ID from 1 to 5
[Sun Jan  1 20:00:01 2012] 392.261200 total counts/ 363.920000 bgd. counts: snr = 1.485646
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.570903 pixels
  Position = (422.1, 280.2) = 19 14 58.67 -24 13 23.1
  Extent = 13.6" x 4.2", rotation angle = 0
  Source counts = 28.3 +/- 19.8
  Background counts = 363.9
  Rate = 0.002 +/- 0.001
  Deleting source due to low Poisson probability