[Thu Jun 14 03:17:33 2012] Detection parameters:
  Position = (421.3, 286.0) = 19 14 59.01 -24 12 53.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.8 +/- 14.1
  Background counts = 8.7
  Rate = 0.01 +/- 0.001

[Thu Jun 14 03:17:33 2012] Off-axis axis estimate = 8.95'
[Thu Jun 14 04:03:21 2012] Using EEF radius (= 10.91 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 04:03:21 2012] Initial guess for spatial extent in simple fitting = 10.91"
[Thu Jun 14 04:03:21 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.995
[Thu Jun 14 04:03:21 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.91"
[Thu Jun 14 04:31:20 2012] fullrun_mos1_xmm0605581101_pi300-10000_cl_pass0_src5.ximg exists
[Thu Jun 14 04:31:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605581101_pi300-10000_cl_pass0_src5.csv
[Thu Jun 14 04:31:20 2012] fullrun_mos1_xmm0605581101_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Jun 14 04:31:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605581101_pi300-10000_cl_pass0_src5.csv
[Thu Jun 14 04:31:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605581101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605581101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 04:31:21 2012] fullrun_mos1_xmm0605581101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Jun 14 04:31:21 2012] fullrun_mos1_xmm0605581101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Jun 14 04:31:21 2012] Fit fullrun_mos1_xmm0605581101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Jun 14 04:53:55 2012] Warning, spatial fit 5 centroid is now closest to src. 1
[Thu Jun 14 04:53:55 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 04:53:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 04:53:55 2012] Assessing source extent using major
[Thu Jun 14 04:53:55 2012] Source does appear to be extended
[Thu Jun 14 04:53:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 05:30:28 2012] Using EEF radius (= 10.91 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 05:30:28 2012] Initial guess for spatial extent in simple fitting = 10.91"
[Thu Jun 14 05:30:28 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.995
[Thu Jun 14 05:30:28 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.91"
[Thu Jun 14 05:52:57 2012] fullrun_mos1_xmm0605581101_pi300-10000_cl_pass1_src5.ximg exists
[Thu Jun 14 05:52:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605581101_pi300-10000_cl_pass1_src5.csv
[Thu Jun 14 05:52:57 2012] fullrun_mos1_xmm0605581101_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Jun 14 05:52:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605581101_pi300-10000_cl_pass1_src5.csv
[Thu Jun 14 05:52:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605581101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605581101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 05:52:57 2012] fullrun_mos1_xmm0605581101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Jun 14 05:52:57 2012] fullrun_mos1_xmm0605581101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Jun 14 05:52:57 2012] Fit fullrun_mos1_xmm0605581101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Jun 14 06:14:08 2012] Spatial fit model total counts = 507.596000, observed total counts = 562.000000
[Thu Jun 14 06:14:08 2012] Offset between fit and detection position for source 13 = 7.300013 pixels
[Thu Jun 14 06:14:08 2012] 416.096516 total counts/ 0.397516 bgd. counts: snr = 659.328233
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 7.300013 pixels
  Position = (420.7, 293.3) = 19 14 59.20 -24 12 23.1
  Extent = 21.4 (21.4-21.4)", rotation angle = 0
  Source counts = 415.7 +/- 20.4
  Background counts = 0.4
  Rate = 0.02 +/- 0.001
[Thu Jun 14 06:14:08 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 06:14:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 06:14:08 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 06:14:08 2012] Source does appear to be extended
[Thu Jun 14 06:14:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 06:57:58 2012] XMMSAS src. selection expression = ellipse(36554.608200, 25469.028000, 1286.016037, 1286.016037, 0.000000, X, Y)
[Thu Jun 14 06:57:58 2012] Writing source region out to fullrun_mos1_xmm0605581101_pi300-10000_pass1_cl_src13_src.reg
[Thu Jun 14 06:57:58 2012] Extracting stamp from image fullrun_mos1_xmm0605581101_pi300-10000_cl_sm2.00.img.gz, (347, 219) - (495, 367)
[Thu Jun 14 06:57:58 2012] XMMSAS bgd. selection expression = annulus(36554.608200, 25469.028000, 2143.360062, 4286.720123, X, Y) && !ellipse(36594.632780, 24168.580000, 782.830423, 594.641617, 112.137635, X, Y) && !ellipse(33050.249800, 23100.731600, 406.239212, 345.516810, 129.662645, X, Y)
[Thu Jun 14 06:57:58 2012] Writing fullrun_mos1_xmm0605581101_pi300-10000_pass1_cl_src13.gif
[Thu Jun 14 06:58:35 2012] Mean detx,y = (-1120.90, 9371.16) 
[Thu Jun 14 06:58:36 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 06:59:24 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 06:59:24 2012] Setting source spectrum file to fullrun_mos1_xmm0605581101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Jun 14 06:59:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0605581101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Thu Jun 14 07:35:58 2012] Updating aperture counts using extracted products
[Thu Jun 14 07:35:58 2012] Error reading totcts from fullrun_mos1_xmm0605581101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Jun 14 07:35:59 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 07:35:59 2012] Using photon index=1.80, rate=0.0216, arf fullrun_mos1_xmm0605581101_pi300-10000_pass1_cl_src13.arf
[Thu Jun 14 07:35:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 07:35:59 2012] Updating source flux to 2.8e-13