[Wed Jan  4 09:45:33 2012] Detection parameters:
  Position = (403.1, 286.1) = 19 15 4.68 -24 12 54.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108.5 +/- 16.8
  Background counts = 89.7
  Rate = 0.004 +/- 0.0007

[Wed Jan  4 09:45:34 2012] Off-axis axis estimate = 7.64'
[Wed Jan  4 09:49:28 2012] Using EEF radius (= 10.25 ")to estimate initial spatial extent for simple fitting
[Wed Jan  4 09:49:28 2012] Initial guess for spatial extent in simple fitting = 10.25"
[Wed Jan  4 09:49:28 2012] source mask rpix=2.4, npix_max = 32, mask sum = 31, frac = 0.950
[Wed Jan  4 09:49:28 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 10.25"
[Wed Jan  4 12:02:27 2012] fullrun_pn_xmm0605581001_pi300-10000_cl_pass0_src35.ximg exists
[Wed Jan  4 12:02:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605581001_pi300-10000_cl_pass0_src35.csv
[Wed Jan  4 12:02:27 2012] fullrun_pn_xmm0605581001_pi300-10000_cl_pass0_src35_1.ximg exists
[Wed Jan  4 12:02:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605581001_pi300-10000_cl_pass0_src35.csv
[Wed Jan  4 12:02:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0605581001_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0605581001_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 12:02:27 2012] fullrun_pn_xmm0605581001_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Wed Jan  4 12:02:27 2012] fullrun_pn_xmm0605581001_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Wed Jan  4 12:02:27 2012] Fit fullrun_pn_xmm0605581001_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Wed Jan  4 14:24:07 2012] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 13.893198 pixels away
[Wed Jan  4 14:24:07 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 14:24:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 14:24:07 2012] Assessing source extent using major
[Wed Jan  4 14:24:07 2012] Source does appear to be extended
[Wed Jan  4 14:24:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 14:24:41 2012] Using EEF radius (= 10.25 ")to estimate initial spatial extent for simple fitting
[Wed Jan  4 14:24:41 2012] Initial guess for spatial extent in simple fitting = 10.25"
[Wed Jan  4 14:24:41 2012] source mask rpix=2.4, npix_max = 32, mask sum = 31, frac = 0.950
[Wed Jan  4 14:24:41 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 10.25"
[Wed Jan  4 16:48:02 2012] fullrun_pn_xmm0605581001_pi300-10000_cl_pass1_src35.ximg exists
[Wed Jan  4 16:48:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605581001_pi300-10000_cl_pass1_src35.csv
[Wed Jan  4 16:48:02 2012] fullrun_pn_xmm0605581001_pi300-10000_cl_pass1_src35_1.ximg exists
[Wed Jan  4 16:48:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605581001_pi300-10000_cl_pass1_src35.csv
[Wed Jan  4 16:48:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0605581001_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0605581001_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 16:48:03 2012] fullrun_pn_xmm0605581001_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Wed Jan  4 16:48:03 2012] fullrun_pn_xmm0605581001_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Wed Jan  4 16:48:03 2012] Fit fullrun_pn_xmm0605581001_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Wed Jan  4 19:08:19 2012] Spatial fit model total counts = 558.372000, observed total counts = 559.000000
[Wed Jan  4 19:08:19 2012] Offset between fit and detection position for source 35 = 0.202594 pixels
[Wed Jan  4 19:08:19 2012] 559.751000 total counts/ 365.424000 bgd. counts: snr = 10.165637
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.202594 pixels
  Position = (403.0, 286.0) = 19 15 4.74 -24 12 54.9
  Extent = 10.5 (8.0-13.4)", rotation angle = 0
  Source counts = 194.3 +/- 23.7
  Background counts = 365.4
  Rate = 0.005 +/- 0.0006
[Wed Jan  4 19:08:19 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 19:08:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 19:08:19 2012] Assessing source extent using major axis lower bound
[Wed Jan  4 19:08:19 2012] Source does appear to be extended
[Wed Jan  4 19:08:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 19:08:57 2012] XMMSAS src. selection expression = ellipse(35011.319938, 24829.304400, 629.484018, 629.484018, 0.000000, X, Y)
[Wed Jan  4 19:08:57 2012] Writing source region out to fullrun_pn_xmm0605581001_pi300-10000_pass1_cl_src35_src.reg
[Wed Jan  4 19:08:57 2012] Extracting stamp from image fullrun_pn_xmm0605581001_pi300-10000_cl_sm2.00.img.gz, (367, 250) - (439, 322)
[Wed Jan  4 19:08:57 2012] XMMSAS bgd. selection expression = annulus(35011.319938, 24829.304400, 1049.140030, 2098.280060, X, Y) && !ellipse(36618.787800, 24161.066200, 462.952013, 462.952013, 0.000000, X, Y) && !ellipse(33070.816010, 23102.938629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36632.832520, 24815.565277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35610.725891, 23338.097229, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan  4 19:08:57 2012] Writing fullrun_pn_xmm0605581001_pi300-10000_pass1_cl_src35.gif
[Wed Jan  4 20:00:02 2012] Mean detx,y = (8075.64, 1376.03) 
[Wed Jan  4 20:00:09 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan  4 20:00:36 2012] Binned source spectrum to 10 counts/bin
[Wed Jan  4 20:00:37 2012] Setting source spectrum file to fullrun_pn_xmm0605581001_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Wed Jan  4 20:00:37 2012] Setting bgd. spectrum file to fullrun_pn_xmm0605581001_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Wed Jan  4 23:10:05 2012] Updating aperture counts using extracted products
[Wed Jan  4 23:10:05 2012] Error reading totcts from fullrun_pn_xmm0605581001_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Wed Jan  4 23:10:07 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan  4 23:10:07 2012] Using photon index=1.80, rate=0.00531, arf fullrun_pn_xmm0605581001_pi300-10000_pass1_cl_src35.arf
[Wed Jan  4 23:10:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan  4 23:10:07 2012] Updating source flux to 2e-14