[Wed Jan  4 09:45:32 2012] Detection parameters:
  Position = (421.6, 278.1) = 19 14 58.81 -24 13 28.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6113.1 +/- 95.9
  Background counts = 87.1
  Rate = 0.3 +/- 0.004

[Wed Jan  4 09:45:34 2012] Off-axis axis estimate = 9.05'
[Wed Jan  4 09:49:28 2012] Using EEF radius (= 10.95 ")to estimate initial spatial extent for simple fitting
[Wed Jan  4 09:49:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jan  4 09:49:28 2012] Initial guess for spatial extent in simple fitting = 10.95"
[Wed Jan  4 09:49:28 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.988
[Wed Jan  4 09:49:28 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.95"
[Wed Jan  4 12:02:26 2012] fullrun_pn_xmm0605581001_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jan  4 12:02:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605581001_pi300-10000_cl_pass0_src1.csv
[Wed Jan  4 12:02:26 2012] fullrun_pn_xmm0605581001_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jan  4 12:02:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605581001_pi300-10000_cl_pass0_src1.csv
[Wed Jan  4 12:02:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0605581001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0605581001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 12:02:27 2012] fullrun_pn_xmm0605581001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jan  4 12:02:27 2012] fullrun_pn_xmm0605581001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jan  4 12:02:27 2012] Fit fullrun_pn_xmm0605581001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jan  4 14:24:07 2012] Spatial fit model total counts = 6864.600000, observed total counts = 6853.000000
[Wed Jan  4 14:24:07 2012] Offset between fit and detection position for source 1 = 0.199685 pixels
[Wed Jan  4 14:24:07 2012] 6735.350000 total counts/ 2388.250000 bgd. counts: snr = 88.952823
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.199685 pixels
  Position = (421.5, 278.3) = 19 14 58.85 -24 13 28.2
  Extent = 6.0 (5.9-6.2)", rotation angle = 0
  Source counts = 4347.1 +/- 82.1
  Background counts = 2388.2
  Rate = 0.1 +/- 0.002
[Wed Jan  4 14:24:07 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 14:24:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 14:24:07 2012] Assessing source extent using major axis lower bound
[Wed Jan  4 14:24:07 2012] Source does appear to be extended
[Wed Jan  4 14:24:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 14:24:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan  4 14:24:41 2012] Initial guess for spatial extent in simple fitting = 5.98"
[Wed Jan  4 14:24:41 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.854
[Wed Jan  4 14:24:41 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.98"
[Wed Jan  4 16:48:02 2012] fullrun_pn_xmm0605581001_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jan  4 16:48:02 2012] fullrun_pn_xmm0605581001_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jan  4 16:48:02 2012] Fit fullrun_pn_xmm0605581001_pi300-10000_cl_pass1_src1 appears to have run properly
[Wed Jan  4 16:48:02 2012] fullrun_pn_xmm0605581001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jan  4 16:48:02 2012] fullrun_pn_xmm0605581001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jan  4 16:48:02 2012] Fit fullrun_pn_xmm0605581001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jan  4 19:08:19 2012] Spatial fit model total counts = 6179.440000, observed total counts = 6181.000000
[Wed Jan  4 19:08:19 2012] Offset between fit and detection position for source 1 = 0.014468 pixels
[Wed Jan  4 19:08:19 2012] 6077.550000 total counts/ 1872.940000 bgd. counts: snr = 97.154694
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.014468 pixels
  Position = (421.5, 278.3) = 19 14 58.86 -24 13 28.2
  Extent = 5.8 (5.6-5.9)", rotation angle = 0
  Source counts = 4204.6 +/- 78.0
  Background counts = 1872.9
  Rate = 0.1 +/- 0.002
[Wed Jan  4 19:08:19 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 19:08:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 19:08:19 2012] Assessing source extent using major axis lower bound
[Wed Jan  4 19:08:19 2012] Source does appear to be extended
[Wed Jan  4 19:08:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 19:08:56 2012] Counts = 4204.610000, rescaling region sizes by 2.000000
[Wed Jan  4 19:08:56 2012] XMMSAS src. selection expression = ellipse(36618.787800, 24161.066200, 694.428020, 694.428020, 0.000000, X, Y)
[Wed Jan  4 19:08:56 2012] Writing source region out to fullrun_pn_xmm0605581001_pi300-10000_pass1_cl_src1_src.reg
[Wed Jan  4 19:08:56 2012] Extracting stamp from image fullrun_pn_xmm0605581001_pi300-10000_cl_sm2.00.img.gz, (382, 238) - (461, 318)
[Wed Jan  4 19:08:56 2012] XMMSAS bgd. selection expression = annulus(36618.787800, 24161.066200, 2314.760067, 4629.520133, X, Y) && !ellipse(33070.816010, 23102.938629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36632.832520, 24815.565277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35011.319938, 24829.304400, 839.312024, 839.312024, 0.000000, X, Y) && !ellipse(35610.725891, 23338.097229, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan  4 19:08:56 2012] Writing fullrun_pn_xmm0605581001_pi300-10000_pass1_cl_src1.gif
[Wed Jan  4 19:09:42 2012] Mean detx,y = (9773.18, 1853.31) 
[Wed Jan  4 19:09:51 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan  4 19:11:21 2012] Binned source spectrum to 10 counts/bin
[Wed Jan  4 19:11:22 2012] Setting source spectrum file to fullrun_pn_xmm0605581001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jan  4 19:11:22 2012] Setting bgd. spectrum file to fullrun_pn_xmm0605581001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jan  4 23:10:03 2012] Updating aperture counts using extracted products
[Wed Jan  4 23:10:03 2012] Error reading totcts from fullrun_pn_xmm0605581001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jan  4 23:10:06 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan  4 23:10:06 2012] Using photon index=1.80, rate=0.115, arf fullrun_pn_xmm0605581001_pi300-10000_pass1_cl_src1.arf
[Wed Jan  4 23:10:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan  4 23:10:06 2012] Updating source flux to 4.6e-13
[Wed Jan  4 23:22:16 2012] Reading fit data from xmm0605581001/analysis//spectral/fullrun_pn_xmm0605581001_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jan  4 23:22:16 2012] Spectral fit parameter nH value = 6.31646e+20
[Wed Jan  4 23:22:16 2012] Spectral fit parameter PhoIndex value = 1.92449
[Wed Jan  4 23:22:16 2012] Failed to get F(0.3-8.0) from xmm0605581001/analysis//spectral/fullrun_pn_xmm0605581001_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jan  4 23:22:16 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan  4 23:22:16 2012] Using Nh = 6.3e+20, photon index=1.92, rate=0.115, arf fullrun_pn_xmm0605581001_pi300-10000_pass1_cl_src1.arf
[Wed Jan  4 23:22:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan  4 23:22:16 2012] Updating source flux to 4.9e-13