[Wed Jan  4 09:46:38 2012] Detection parameters:
  Position = (421.6, 278.2) = 19 14 58.80 -24 13 27.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2097.5 +/- 56.1
  Background counts = 25.3
  Rate = 0.08 +/- 0.002

[Wed Jan  4 09:46:39 2012] Off-axis axis estimate = 9.05'
[Wed Jan  4 13:20:42 2012] Using EEF radius (= 10.95 ")to estimate initial spatial extent for simple fitting
[Wed Jan  4 13:20:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jan  4 13:20:42 2012] Initial guess for spatial extent in simple fitting = 10.95"
[Wed Jan  4 13:20:42 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.988
[Wed Jan  4 13:20:42 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.95"
[Wed Jan  4 14:23:52 2012] fullrun_mos2_xmm0605581001_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jan  4 14:23:52 2012] fullrun_mos2_xmm0605581001_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jan  4 14:23:52 2012] Fit fullrun_mos2_xmm0605581001_pi300-10000_cl_pass0_src1 appears to have run properly
[Wed Jan  4 14:23:53 2012] fullrun_mos2_xmm0605581001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jan  4 14:23:53 2012] fullrun_mos2_xmm0605581001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jan  4 14:23:53 2012] Fit fullrun_mos2_xmm0605581001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jan  4 14:24:23 2012] Spatial fit model total counts = 2420.010000, observed total counts = 2420.000000
[Wed Jan  4 14:24:23 2012] Offset between fit and detection position for source 1 = 0.239960 pixels
[Wed Jan  4 14:24:23 2012] 2437.812000 total counts/ 970.672000 bgd. counts: snr = 47.090717
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.239960 pixels
  Position = (421.5, 278.4) = 19 14 58.85 -24 13 27.6
  Extent = 5.9" x 5.1", rotation angle = 97
  Source counts = 1467.1 +/- 49.4
  Background counts = 970.7
  Rate = 0.04 +/- 0.001
[Wed Jan  4 14:24:23 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 14:24:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 14:24:23 2012] Assessing source extent using major
[Wed Jan  4 14:24:23 2012] Source does appear to be extended
[Wed Jan  4 14:24:23 2012] Computing asymmetry using major and minor axis, asym = 1.17
[Wed Jan  4 14:24:23 2012] Source is confused with source 5
[Wed Jan  4 18:07:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan  4 18:07:23 2012] Initial guess for spatial extent in simple fitting = 5.48"
[Wed Jan  4 18:07:23 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.727
[Wed Jan  4 18:07:23 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.48"
[Wed Jan  4 19:08:04 2012] fullrun_mos2_xmm0605581001_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jan  4 19:08:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605581001_pi300-10000_cl_pass1_src1.csv
[Wed Jan  4 19:08:04 2012] fullrun_mos2_xmm0605581001_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jan  4 19:08:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605581001_pi300-10000_cl_pass1_src1.csv
[Wed Jan  4 19:08:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0605581001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0605581001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 19:08:05 2012] fullrun_mos2_xmm0605581001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jan  4 19:08:05 2012] fullrun_mos2_xmm0605581001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jan  4 19:08:05 2012] Fit fullrun_mos2_xmm0605581001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jan  4 19:08:36 2012] Spatial fit model total counts = 2190.000000, observed total counts = 2190.000000
[Wed Jan  4 19:08:36 2012] Offset between fit and detection position for source 1 = 0.025315 pixels
[Wed Jan  4 19:08:36 2012] 2180.169000 total counts/ 759.129000 bgd. counts: snr = 51.576101
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.025315 pixels
  Position = (421.5, 278.4) = 19 14 58.86 -24 13 27.7
  Extent = 5.2 (5.0-5.5)", rotation angle = 0
  Source counts = 1421.0 +/- 46.7
  Background counts = 759.1
  Rate = 0.03 +/- 0.001
[Wed Jan  4 19:08:36 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 19:08:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 19:08:36 2012] Assessing source extent using major axis lower bound
[Wed Jan  4 19:08:36 2012] Source does appear to be extended
[Wed Jan  4 19:08:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 22:18:26 2012] Counts = 1421.040000, rescaling region sizes by 2.000000
[Wed Jan  4 22:18:26 2012] XMMSAS src. selection expression = ellipse(36617.980600, 24171.422800, 629.878818, 629.878818, 0.000000, X, Y)
[Wed Jan  4 22:18:26 2012] Writing source region out to fullrun_mos2_xmm0605581001_pi300-10000_pass1_cl_src1_src.reg
[Wed Jan  4 22:18:26 2012] Extracting stamp from image fullrun_mos2_xmm0605581001_pi300-10000_cl_sm2.00.img.gz, (385, 242) - (458, 315)
[Wed Jan  4 22:18:26 2012] XMMSAS bgd. selection expression = annulus(36617.980600, 24171.422800, 2099.596060, 4199.192121, X, Y) && !ellipse(33047.805800, 23107.468000, 388.884811, 388.884811, 0.000000, X, Y) && !ellipse(36644.034088, 24812.716431, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan  4 22:18:26 2012] Writing fullrun_mos2_xmm0605581001_pi300-10000_pass1_cl_src1.gif
[Wed Jan  4 22:18:33 2012] Mean detx,y = (-9644.39, -1894.48) 
[Wed Jan  4 22:18:34 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan  4 22:19:17 2012] Binned source spectrum to 10 counts/bin
[Wed Jan  4 22:19:18 2012] Setting source spectrum file to fullrun_mos2_xmm0605581001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jan  4 22:19:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0605581001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jan  4 23:10:11 2012] Updating aperture counts using extracted products
[Wed Jan  4 23:10:11 2012] Error reading totcts from fullrun_mos2_xmm0605581001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jan  4 23:10:13 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan  4 23:10:13 2012] Using photon index=1.80, rate=0.0343, arf fullrun_mos2_xmm0605581001_pi300-10000_pass1_cl_src1.arf
[Wed Jan  4 23:10:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan  4 23:10:13 2012] Updating source flux to 5.6e-13
[Wed Jan  4 23:13:01 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Wed Jan  4 23:14:47 2012] Reading fit data from xmm0605581001/analysis//spectral/fullrun_mos2_xmm0605581001_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jan  4 23:14:47 2012] Spectral fit parameter nH value = 5.30261e+20
[Wed Jan  4 23:14:47 2012] Spectral fit parameter PhoIndex value = 1.85262
[Wed Jan  4 23:14:47 2012] Failed to get F(0.3-8.0) from xmm0605581001/analysis//spectral/fullrun_mos2_xmm0605581001_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jan  4 23:14:47 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan  4 23:14:47 2012] Using Nh = 5.3e+20, photon index=1.85, rate=0.0343, arf fullrun_mos2_xmm0605581001_pi300-10000_pass1_cl_src1.arf
[Wed Jan  4 23:14:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan  4 23:14:47 2012] Updating source flux to 5.7e-13