[Wed Jan  4 09:46:11 2012] Detection parameters:
  Position = (295.0, 242.2) = 19 15 39.08 -24 16 11.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.8 +/- 12.6
  Background counts = 29.6
  Rate = 0.004 +/- 0.0006

[Wed Jan  4 09:46:11 2012] Off-axis axis estimate = 4.08'
[Wed Jan  4 12:02:27 2012] Using EEF radius (= 8.47 ")to estimate initial spatial extent for simple fitting
[Wed Jan  4 12:02:27 2012] Initial guess for spatial extent in simple fitting = 8.47"
[Wed Jan  4 12:02:27 2012] source mask rpix=1.9, npix_max = 23, mask sum = 15, frac = 0.626
[Wed Jan  4 12:02:27 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 8.47"
[Wed Jan  4 13:20:41 2012] fullrun_mos1_xmm0605581001_pi300-10000_cl_pass0_src9.ximg exists
[Wed Jan  4 13:20:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605581001_pi300-10000_cl_pass0_src9.csv
[Wed Jan  4 13:20:41 2012] fullrun_mos1_xmm0605581001_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed Jan  4 13:20:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605581001_pi300-10000_cl_pass0_src9.csv
[Wed Jan  4 13:20:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605581001_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605581001_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 13:20:41 2012] fullrun_mos1_xmm0605581001_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed Jan  4 13:20:41 2012] fullrun_mos1_xmm0605581001_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Jan  4 13:20:41 2012] Fit fullrun_mos1_xmm0605581001_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Wed Jan  4 14:24:15 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 11.593088 pixels away
[Wed Jan  4 14:24:15 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 14:24:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 14:24:15 2012] Assessing source extent using major
[Wed Jan  4 14:24:15 2012] Source does appear to be extended
[Wed Jan  4 14:24:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 16:48:03 2012] Using EEF radius (= 8.47 ")to estimate initial spatial extent for simple fitting
[Wed Jan  4 16:48:03 2012] Initial guess for spatial extent in simple fitting = 8.47"
[Wed Jan  4 16:48:03 2012] source mask rpix=1.9, npix_max = 23, mask sum = 15, frac = 0.626
[Wed Jan  4 16:48:03 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 8.47"
[Wed Jan  4 18:07:22 2012] fullrun_mos1_xmm0605581001_pi300-10000_cl_pass1_src9.ximg exists
[Wed Jan  4 18:07:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605581001_pi300-10000_cl_pass1_src9.csv
[Wed Jan  4 18:07:22 2012] fullrun_mos1_xmm0605581001_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed Jan  4 18:07:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605581001_pi300-10000_cl_pass1_src9.csv
[Wed Jan  4 18:07:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605581001_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605581001_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 18:07:22 2012] fullrun_mos1_xmm0605581001_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed Jan  4 18:07:22 2012] fullrun_mos1_xmm0605581001_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Jan  4 18:07:22 2012] Fit fullrun_mos1_xmm0605581001_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Wed Jan  4 19:08:27 2012] Spatial fit model total counts = 212.818000, observed total counts = 222.000000
[Wed Jan  4 19:08:27 2012] Offset between fit and detection position for source 19 = 0.997142 pixels
[Wed Jan  4 19:08:27 2012] 228.049700 total counts/ 167.367000 bgd. counts: snr = 4.690617
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.997142 pixels
  Position = (295.1, 241.2) = 19 15 39.03 -24 16 9.6
  Extent = 4.1 (3.3-4.6)", rotation angle = 0
  Source counts = 60.7 +/- 15.1
  Background counts = 167.4
  Rate = 0.002 +/- 0.0004
[Wed Jan  4 19:08:27 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 19:08:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 19:08:27 2012] Assessing source extent using major axis lower bound
[Wed Jan  4 19:08:27 2012] Source does appear to be extended
[Wed Jan  4 19:08:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 21:27:06 2012] XMMSAS src. selection expression = ellipse(25627.944440, 20940.154600, 243.330607, 243.330607, 0.000000, X, Y)
[Wed Jan  4 21:27:06 2012] Writing source region out to fullrun_mos1_xmm0605581001_pi300-10000_pass1_cl_src19_src.reg
[Wed Jan  4 21:27:06 2012] Extracting stamp from image fullrun_mos1_xmm0605581001_pi300-10000_cl_sm2.00.img.gz, (281, 227) - (309, 255)
[Wed Jan  4 21:27:06 2012] XMMSAS bgd. selection expression = annulus(25627.944440, 20940.154600, 405.551012, 811.102023, X, Y)
[Wed Jan  4 21:27:06 2012] Writing fullrun_mos1_xmm0605581001_pi300-10000_pass1_cl_src19.gif
[Wed Jan  4 21:34:09 2012] Mean detx,y = (-6372.63, -1015.12) 
[Wed Jan  4 21:34:11 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan  4 21:34:33 2012] Binned source spectrum to 10 counts/bin
[Wed Jan  4 21:34:34 2012] Setting source spectrum file to fullrun_mos1_xmm0605581001_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Wed Jan  4 21:34:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0605581001_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Wed Jan  4 22:11:32 2012] Not generating rmf since there are only 60 counts
[Wed Jan  4 22:11:32 2012] rmf not generated due to insufficient counts
[Wed Jan  4 23:10:08 2012] Updating aperture counts using extracted products
[Wed Jan  4 23:10:08 2012] Error reading totcts from fullrun_mos1_xmm0605581001_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Wed Jan  4 23:10:10 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan  4 23:10:10 2012] Using photon index=1.80, rate=0.00151, arf fullrun_mos1_xmm0605581001_pi300-10000_pass1_cl_src19.arf
[Wed Jan  4 23:10:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan  4 23:10:10 2012] Updating source flux to 2.8e-14
[Wed Jan  4 23:10:17 2012] Source 19 has fewer than 100.000000 counts, skipping spectral fitting