[Sun Feb 26 10:20:01 2012] Detection parameters:
  Position = (422.1, 279.0) = 19 14 58.81 -24 13 26.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 688.2 +/- 32.2
  Background counts = 6.7
  Rate = 0.08 +/- 0.004

[Sun Feb 26 10:20:01 2012] Off-axis axis estimate = 9.07'
[Sun Feb 26 12:30:39 2012] Using EEF radius (= 10.97 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 12:30:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 26 12:30:39 2012] Initial guess for spatial extent in simple fitting = 10.97"
[Sun Feb 26 12:30:39 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.986
[Sun Feb 26 12:30:39 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.97"
[Sun Feb 26 13:07:21 2012] fullrun_mos2_xmm0605580601_pi300-10000_cl_pass0_src1.ximg exists
[Sun Feb 26 13:07:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605580601_pi300-10000_cl_pass0_src1.csv
[Sun Feb 26 13:07:21 2012] fullrun_mos2_xmm0605580601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Feb 26 13:07:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605580601_pi300-10000_cl_pass0_src1.csv
[Sun Feb 26 13:07:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0605580601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0605580601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 13:07:21 2012] fullrun_mos2_xmm0605580601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Feb 26 13:07:21 2012] fullrun_mos2_xmm0605580601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Feb 26 13:07:21 2012] Fit fullrun_mos2_xmm0605580601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Feb 26 13:07:43 2012] Warning, spatial fit 1 centroid is now closest to src. 4
[Sun Feb 26 13:07:43 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 13:07:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 13:07:43 2012] Assessing source extent using major
[Sun Feb 26 13:07:43 2012] Source does appear to be extended
[Sun Feb 26 13:07:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 15:07:08 2012] Using EEF radius (= 10.97 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 15:07:08 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 26 15:07:08 2012] Initial guess for spatial extent in simple fitting = 10.97"
[Sun Feb 26 15:07:08 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.986
[Sun Feb 26 15:07:08 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.97"
[Sun Feb 26 15:43:13 2012] fullrun_mos2_xmm0605580601_pi300-10000_cl_pass1_src1.ximg exists
[Sun Feb 26 15:43:13 2012] fullrun_mos2_xmm0605580601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Feb 26 15:43:13 2012] Fit fullrun_mos2_xmm0605580601_pi300-10000_cl_pass1_src1 appears to have run properly
[Sun Feb 26 15:43:13 2012] fullrun_mos2_xmm0605580601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Feb 26 15:43:13 2012] fullrun_mos2_xmm0605580601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Feb 26 15:43:13 2012] Fit fullrun_mos2_xmm0605580601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Feb 26 15:43:33 2012] Spatial fit model total counts = 825.028000, observed total counts = 825.000000
[Sun Feb 26 15:43:33 2012] Offset between fit and detection position for source 1 = 0.188062 pixels
[Sun Feb 26 15:43:33 2012] 830.010000 total counts/ 321.540000 bgd. counts: snr = 28.356187
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.188062 pixels
  Position = (421.9, 278.9) = 19 14 58.87 -24 13 27.3
  Extent = 7.4" x 5.1", rotation angle = 111
  Source counts = 508.5 +/- 28.8
  Background counts = 321.5
  Rate = 0.04 +/- 0.002
[Sun Feb 26 15:43:33 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 15:43:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 15:43:33 2012] Assessing source extent using major
[Sun Feb 26 15:43:33 2012] Source does appear to be extended
[Sun Feb 26 15:43:33 2012] Computing asymmetry using major and minor axis, asym = 1.43
[Sun Feb 26 17:03:04 2012] XMMSAS src. selection expression = ellipse(36656.173600, 24218.955000, 442.899613, 308.954409, 111.027219, X, Y)
[Sun Feb 26 17:03:04 2012] Writing source region out to fullrun_mos2_xmm0605580601_pi300-10000_pass1_cl_src1_src.reg
[Sun Feb 26 17:03:04 2012] Extracting stamp from image fullrun_mos2_xmm0605580601_pi300-10000_cl_sm2.00.img.gz, (396, 253) - (447, 304)
[Sun Feb 26 17:03:04 2012] XMMSAS bgd. selection expression = annulus(36656.173600, 24218.955000, 738.166021, 1476.332042, X, Y) && !ellipse(36679.502625, 24929.803223, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Feb 26 17:03:04 2012] Writing fullrun_mos2_xmm0605580601_pi300-10000_pass1_cl_src1.gif
[Sun Feb 26 17:03:08 2012] Mean detx,y = (-9684.29, -1836.83) 
[Sun Feb 26 17:03:10 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 26 17:03:23 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 26 17:03:23 2012] Setting source spectrum file to fullrun_mos2_xmm0605580601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Feb 26 17:03:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0605580601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Feb 26 17:22:23 2012] Updating aperture counts using extracted products
[Sun Feb 26 17:22:23 2012] Error reading totcts from fullrun_mos2_xmm0605580601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Feb 26 17:22:24 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 17:22:24 2012] Using photon index=1.80, rate=0.0368, arf fullrun_mos2_xmm0605580601_pi300-10000_pass1_cl_src1.arf
[Sun Feb 26 17:22:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 17:22:24 2012] Updating source flux to 6.7e-13
[Sun Feb 26 17:25:00 2012] Reading fit data from xmm0605580601/analysis//spectral/fullrun_mos2_xmm0605580601_pi300-10000_pass1_cl_src1_pl.csv
[Sun Feb 26 17:25:00 2012] Spectral fit parameter nH value = 6.93996e+20
[Sun Feb 26 17:25:00 2012] Spectral fit parameter PhoIndex value = 1.81595
[Sun Feb 26 17:25:00 2012] Failed to get F(0.3-8.0) from xmm0605580601/analysis//spectral/fullrun_mos2_xmm0605580601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Feb 26 17:25:00 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 17:25:00 2012] Using Nh = 6.9e+20, photon index=1.82, rate=0.0368, arf fullrun_mos2_xmm0605580601_pi300-10000_pass1_cl_src1.arf
[Sun Feb 26 17:25:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 17:25:00 2012] Updating source flux to 7.1e-13