[Sun Feb 26 10:19:21 2012] Detection parameters:
  Position = (422.2, 285.8) = 19 14 58.77 -24 12 53.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.4 +/- 9.9
  Background counts = 6.5
  Rate = 0.005 +/- 0.001

[Sun Feb 26 10:19:21 2012] Off-axis axis estimate = 9.02'
[Sun Feb 26 11:39:34 2012] Using EEF radius (= 10.94 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 11:39:34 2012] Initial guess for spatial extent in simple fitting = 10.94"
[Sun Feb 26 11:39:34 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.990
[Sun Feb 26 11:39:34 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.94"
[Sun Feb 26 12:30:39 2012] fullrun_mos1_xmm0605580601_pi300-10000_cl_pass0_src5.ximg exists
[Sun Feb 26 12:30:39 2012] fullrun_mos1_xmm0605580601_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Feb 26 12:30:39 2012] Fit fullrun_mos1_xmm0605580601_pi300-10000_cl_pass0_src5 appears to have run properly
[Sun Feb 26 12:30:39 2012] fullrun_mos1_xmm0605580601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Feb 26 12:30:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605580601_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Feb 26 12:30:39 2012] fullrun_mos1_xmm0605580601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Feb 26 12:30:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605580601_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Feb 26 12:30:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605580601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605580601_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 13:07:37 2012] Source 13 is offset by 4.118591 and -7.954182 pixels which is larger than
2 X fitted extent = 7.940138 x 0.992625, not incorporating fit results
[Sun Feb 26 13:07:37 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 13:07:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 13:07:37 2012] Assessing source extent using major
[Sun Feb 26 13:07:37 2012] Source does appear to be extended
[Sun Feb 26 13:07:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 13:07:37 2012] Source is confused with source 1
[Sun Feb 26 14:11:01 2012] Using EEF radius (= 10.94 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 14:11:01 2012] Initial guess for spatial extent in simple fitting = 10.94"
[Sun Feb 26 14:11:01 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.990
[Sun Feb 26 14:11:01 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.94"
[Sun Feb 26 15:07:07 2012] fullrun_mos1_xmm0605580601_pi300-10000_cl_pass1_src5.ximg exists
[Sun Feb 26 15:07:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605580601_pi300-10000_cl_pass1_src5.csv
[Sun Feb 26 15:07:07 2012] fullrun_mos1_xmm0605580601_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Feb 26 15:07:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605580601_pi300-10000_cl_pass1_src5.csv
[Sun Feb 26 15:07:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605580601_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605580601_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 15:07:07 2012] fullrun_mos1_xmm0605580601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Feb 26 15:07:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605580601_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun Feb 26 15:07:07 2012] fullrun_mos1_xmm0605580601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Feb 26 15:07:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605580601_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun Feb 26 15:07:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605580601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605580601_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 15:43:29 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 45.724559 pixels away
[Sun Feb 26 15:43:29 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 13.243511 pixels away
[Sun Feb 26 15:43:29 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 15:43:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 15:43:29 2012] Assessing source extent using major
[Sun Feb 26 15:43:29 2012] Source does appear to be extended
[Sun Feb 26 15:43:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 16:42:28 2012] XMMSAS src. selection expression = ellipse(36683.575439, 24815.512177, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Feb 26 16:42:28 2012] Writing source region out to fullrun_mos1_xmm0605580601_pi300-10000_pass1_cl_src13_src.reg
[Sun Feb 26 16:42:28 2012] Extracting stamp from image fullrun_mos1_xmm0605580601_pi300-10000_cl_sm2.00.img.gz, (385, 248) - (460, 323)
[Sun Feb 26 16:42:28 2012] XMMSAS bgd. selection expression = annulus(36683.575439, 24815.512177, 1087.500000, 2175.000000, X, Y) && !ellipse(36654.104000, 24203.835400, 590.811217, 590.811217, 0.000000, X, Y)
[Sun Feb 26 16:42:28 2012] Writing fullrun_mos1_xmm0605580601_pi300-10000_pass1_cl_src13.gif
[Sun Feb 26 16:44:06 2012] Mean detx,y = (-1414.11, 9502.73) 
[Sun Feb 26 16:44:08 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 26 16:44:49 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 26 16:44:49 2012] Setting source spectrum file to fullrun_mos1_xmm0605580601_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sun Feb 26 16:44:49 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0605580601_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sun Feb 26 17:00:34 2012] Not generating rmf since there are only 39 counts
[Sun Feb 26 17:00:34 2012] rmf not generated due to insufficient counts
[Sun Feb 26 17:22:21 2012] Updating aperture counts using extracted products
[Sun Feb 26 17:22:21 2012] Error reading totcts from fullrun_mos1_xmm0605580601_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sun Feb 26 17:22:22 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 17:22:22 2012] Using photon index=1.80, rate=0.00541, arf fullrun_mos1_xmm0605580601_pi300-10000_pass1_cl_src13.arf
[Sun Feb 26 17:22:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 17:22:22 2012] Updating source flux to 9e-14
[Sun Feb 26 17:22:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting