[Sun Feb 26 10:19:20 2012] Detection parameters:
  Position = (319.7, 307.3) = 19 15 31.36 -24 11 24.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.6 +/- 10.4
  Background counts = 7.1
  Rate = 0.004 +/- 0.0008

[Sun Feb 26 10:19:21 2012] Off-axis axis estimate = 1.67'
[Sun Feb 26 11:39:34 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 11:39:34 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Sun Feb 26 11:39:34 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Sun Feb 26 11:39:34 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.26"
[Sun Feb 26 12:30:39 2012] fullrun_mos1_xmm0605580601_pi300-10000_cl_pass0_src10.ximg exists
[Sun Feb 26 12:30:39 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0605580601_pi300-10000_cl_pass0_src10.csv
[Sun Feb 26 12:30:39 2012] fullrun_mos1_xmm0605580601_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun Feb 26 12:30:39 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0605580601_pi300-10000_cl_pass0_src10.csv
[Sun Feb 26 12:30:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605580601_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605580601_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 12:30:39 2012] fullrun_mos1_xmm0605580601_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun Feb 26 12:30:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605580601_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun Feb 26 12:30:39 2012] fullrun_mos1_xmm0605580601_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Feb 26 12:30:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605580601_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun Feb 26 12:30:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605580601_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605580601_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 13:07:37 2012] Warning, spatial fit 10 centroid is now closest to src. 10
[Sun Feb 26 13:07:37 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 13:07:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 13:07:37 2012] Assessing source extent using major
[Sun Feb 26 13:07:37 2012] Source does appear to be extended
[Sun Feb 26 13:07:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 14:11:01 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 14:11:01 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Sun Feb 26 14:11:01 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Sun Feb 26 14:11:01 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 7.26"
[Sun Feb 26 15:07:07 2012] fullrun_mos1_xmm0605580601_pi300-10000_cl_pass1_src10.ximg exists
[Sun Feb 26 15:07:07 2012] fullrun_mos1_xmm0605580601_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun Feb 26 15:07:07 2012] Fit fullrun_mos1_xmm0605580601_pi300-10000_cl_pass1_src10 appears to have run properly
[Sun Feb 26 15:07:08 2012] fullrun_mos1_xmm0605580601_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun Feb 26 15:07:08 2012] fullrun_mos1_xmm0605580601_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Feb 26 15:07:08 2012] Fit fullrun_mos1_xmm0605580601_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sun Feb 26 15:43:29 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 119.420679 pixels away
[Sun Feb 26 15:43:29 2012] Source 11 is offset by 5.833612 and -7.394552 pixels which is larger than
2 X fitted extent = 2.169858 x 2.169858, not incorporating fit results
[Sun Feb 26 15:43:29 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 64.893169 pixels away
[Sun Feb 26 15:43:29 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 15:43:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 15:43:29 2012] Assessing source extent using major
[Sun Feb 26 15:43:29 2012] Source does appear to be extended
[Sun Feb 26 15:43:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 16:42:28 2012] XMMSAS src. selection expression = ellipse(27766.962219, 26685.297974, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Feb 26 16:42:28 2012] Writing source region out to fullrun_mos1_xmm0605580601_pi300-10000_pass1_cl_src11_src.reg
[Sun Feb 26 16:42:28 2012] Extracting stamp from image fullrun_mos1_xmm0605580601_pi300-10000_cl_sm2.00.img.gz, (282, 270) - (357, 345)
[Sun Feb 26 16:42:28 2012] XMMSAS bgd. selection expression = annulus(27766.962219, 26685.297974, 1087.500000, 2175.000000, X, Y) && !ellipse(27262.761980, 27414.546600, 371.890411, 371.890411, 0.000000, X, Y) && !ellipse(28381.297920, 27681.273400, 539.302416, 296.610409, 34.925000, X, Y) && !ellipse(28356.261600, 25553.455600, 652.897619, 652.897619, 0.000000, X, Y)
[Sun Feb 26 16:42:28 2012] Writing fullrun_mos1_xmm0605580601_pi300-10000_pass1_cl_src11.gif
[Sun Feb 26 16:47:00 2012] Mean detx,y = (-321.54, 274.80) 
[Sun Feb 26 16:47:02 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 26 16:47:16 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 26 16:47:16 2012] Setting source spectrum file to fullrun_mos1_xmm0605580601_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Feb 26 16:47:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0605580601_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun Feb 26 17:01:27 2012] Not generating rmf since there are only 57 counts
[Sun Feb 26 17:01:27 2012] rmf not generated due to insufficient counts
[Sun Feb 26 17:22:21 2012] Updating aperture counts using extracted products
[Sun Feb 26 17:22:21 2012] Error reading totcts from fullrun_mos1_xmm0605580601_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Feb 26 17:22:23 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 17:22:23 2012] Using photon index=1.80, rate=0.00426, arf fullrun_mos1_xmm0605580601_pi300-10000_pass1_cl_src11.arf
[Sun Feb 26 17:22:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 17:22:23 2012] Updating source flux to 4.2e-14
[Sun Feb 26 17:22:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting