[Sun Feb 26 10:19:20 2012] Detection parameters:
  Position = (422.1, 278.9) = 19 14 58.81 -24 13 27.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 532.9 +/- 29.2
  Background counts = 6.6
  Rate = 0.08 +/- 0.004

[Sun Feb 26 10:19:21 2012] Off-axis axis estimate = 9.08'
[Sun Feb 26 11:39:34 2012] Using EEF radius (= 10.97 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 11:39:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 26 11:39:34 2012] Initial guess for spatial extent in simple fitting = 10.97"
[Sun Feb 26 11:39:34 2012] source mask rpix=2.5, npix_max = 36, mask sum = 35, frac = 0.959
[Sun Feb 26 11:39:34 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.97"
[Sun Feb 26 12:30:39 2012] fullrun_mos1_xmm0605580601_pi300-10000_cl_pass0_src1.ximg exists
[Sun Feb 26 12:30:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605580601_pi300-10000_cl_pass0_src1.csv
[Sun Feb 26 12:30:39 2012] fullrun_mos1_xmm0605580601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Feb 26 12:30:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605580601_pi300-10000_cl_pass0_src1.csv
[Sun Feb 26 12:30:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605580601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605580601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 12:30:39 2012] fullrun_mos1_xmm0605580601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Feb 26 12:30:39 2012] fullrun_mos1_xmm0605580601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Feb 26 12:30:39 2012] Fit fullrun_mos1_xmm0605580601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Feb 26 13:07:37 2012] Spatial fit model total counts = 661.820000, observed total counts = 662.000000
[Sun Feb 26 13:07:37 2012] Offset between fit and detection position for source 1 = 0.208126 pixels
[Sun Feb 26 13:07:37 2012] 660.139000 total counts/ 243.203000 bgd. counts: snr = 26.735292
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.208126 pixels
  Position = (421.9, 278.8) = 19 14 58.87 -24 13 28.0
  Extent = 7.5 (7.0-8.1)", rotation angle = 0
  Source counts = 416.9 +/- 25.7
  Background counts = 243.2
  Rate = 0.03 +/- 0.002
[Sun Feb 26 13:07:37 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 13:07:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 13:07:37 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 13:07:37 2012] Source does appear to be extended
[Sun Feb 26 13:07:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 13:07:37 2012] Source is confused with source 13
[Sun Feb 26 14:11:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 14:11:01 2012] Initial guess for spatial extent in simple fitting = 7.54"
[Sun Feb 26 14:11:01 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.802
[Sun Feb 26 14:11:01 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.54"
[Sun Feb 26 15:07:07 2012] fullrun_mos1_xmm0605580601_pi300-10000_cl_pass1_src1.ximg exists
[Sun Feb 26 15:07:07 2012] fullrun_mos1_xmm0605580601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Feb 26 15:07:07 2012] Fit fullrun_mos1_xmm0605580601_pi300-10000_cl_pass1_src1 appears to have run properly
[Sun Feb 26 15:07:07 2012] fullrun_mos1_xmm0605580601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Feb 26 15:07:07 2012] fullrun_mos1_xmm0605580601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Feb 26 15:07:07 2012] Fit fullrun_mos1_xmm0605580601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Feb 26 15:43:29 2012] Spatial fit model total counts = 568.809000, observed total counts = 569.000000
[Sun Feb 26 15:43:29 2012] Offset between fit and detection position for source 1 = 0.019731 pixels
[Sun Feb 26 15:43:29 2012] 569.492000 total counts/ 162.118000 bgd. counts: snr = 31.994674
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.019731 pixels
  Position = (421.9, 278.8) = 19 14 58.88 -24 13 28.1
  Extent = 7.4 (6.8-8.0)", rotation angle = 0
  Source counts = 407.4 +/- 23.9
  Background counts = 162.1
  Rate = 0.03 +/- 0.002
[Sun Feb 26 15:43:29 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 15:43:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 15:43:29 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 15:43:29 2012] Source does appear to be extended
[Sun Feb 26 15:43:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 16:42:28 2012] XMMSAS src. selection expression = ellipse(36654.104000, 24203.835400, 443.108413, 443.108413, 0.000000, X, Y)
[Sun Feb 26 16:42:28 2012] Writing source region out to fullrun_mos1_xmm0605580601_pi300-10000_pass1_cl_src1_src.reg
[Sun Feb 26 16:42:28 2012] Extracting stamp from image fullrun_mos1_xmm0605580601_pi300-10000_cl_sm2.00.img.gz, (396, 253) - (447, 304)
[Sun Feb 26 16:42:28 2012] XMMSAS bgd. selection expression = annulus(36654.104000, 24203.835400, 738.514021, 1477.028043, X, Y) && !ellipse(36683.575439, 24815.512177, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Feb 26 16:42:28 2012] Writing fullrun_mos1_xmm0605580601_pi300-10000_pass1_cl_src1.gif
[Sun Feb 26 16:42:32 2012] Mean detx,y = (-1675.18, 9506.27) 
[Sun Feb 26 16:42:34 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 26 16:42:51 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 26 16:42:51 2012] Setting source spectrum file to fullrun_mos1_xmm0605580601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Feb 26 16:42:51 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0605580601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Feb 26 17:22:20 2012] Updating aperture counts using extracted products
[Sun Feb 26 17:22:20 2012] Error reading totcts from fullrun_mos1_xmm0605580601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Feb 26 17:22:22 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 17:22:22 2012] Using photon index=1.80, rate=0.0295, arf fullrun_mos1_xmm0605580601_pi300-10000_pass1_cl_src1.arf
[Sun Feb 26 17:22:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 17:22:22 2012] Updating source flux to 5.5e-13
[Sun Feb 26 17:22:27 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Sun Feb 26 17:23:27 2012] Reading fit data from xmm0605580601/analysis//spectral/fullrun_mos1_xmm0605580601_pi300-10000_pass1_cl_src1_pl.csv
[Sun Feb 26 17:23:27 2012] Spectral fit parameter nH value = 1.52175e+17
[Sun Feb 26 17:23:27 2012] Spectral fit parameter PhoIndex value = 1.62859
[Sun Feb 26 17:23:27 2012] Failed to get F(0.3-8.0) from xmm0605580601/analysis//spectral/fullrun_mos1_xmm0605580601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Feb 26 17:23:27 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 17:23:27 2012] Using Nh = 1.5e+17, photon index=1.63, rate=0.0295, arf fullrun_mos1_xmm0605580601_pi300-10000_pass1_cl_src1.arf
[Sun Feb 26 17:23:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 17:23:27 2012] Updating source flux to 5.9e-13