[Thu Dec 22 11:10:04 2011] Detection parameters:
  Position = (300.3, 335.3) = 10 23 41.50 4 12 10.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1030.3 +/- 44.8
  Background counts = 155.5
  Rate = 0.03 +/- 0.001

[Thu Dec 22 11:10:07 2011] Off-axis axis estimate = 2.68'
[Thu Dec 22 11:20:06 2011] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 11:20:06 2011] Initial guess for spatial extent in simple fitting = 7.77"
[Thu Dec 22 11:20:06 2011] source mask rpix=1.8, npix_max = 20, mask sum = 23, frac = 1.101
[Thu Dec 22 11:20:06 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 7.77"
[Thu Dec 22 14:21:00 2011] fullrun_pn_xmm0605540301_pi300-10000_cl_pass0_src11.ximg exists
[Thu Dec 22 14:21:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605540301_pi300-10000_cl_pass0_src11.csv
[Thu Dec 22 14:21:00 2011] fullrun_pn_xmm0605540301_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Dec 22 14:21:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605540301_pi300-10000_cl_pass0_src11.csv
[Thu Dec 22 14:21:00 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0605540301_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0605540301_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 14:21:01 2011] fullrun_pn_xmm0605540301_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Dec 22 14:21:01 2011] fullrun_pn_xmm0605540301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Dec 22 14:21:01 2011] Fit fullrun_pn_xmm0605540301_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Dec 22 19:13:55 2011] Source 12 is offset by -5.133764 and 6.472081 pixels which is larger than
2 X fitted extent = 3.319007 x 3.319007, not incorporating fit results
[Thu Dec 22 19:13:55 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 19:13:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 19:13:55 2011] Assessing source extent using major
[Thu Dec 22 19:13:55 2011] Source does appear to be extended
[Thu Dec 22 19:13:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 19:14:40 2011] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 19:14:40 2011] Initial guess for spatial extent in simple fitting = 7.77"
[Thu Dec 22 19:14:40 2011] source mask rpix=1.8, npix_max = 20, mask sum = 23, frac = 1.101
[Thu Dec 22 19:14:40 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 7.77"
[Thu Dec 22 22:28:33 2011] fullrun_pn_xmm0605540301_pi300-10000_cl_pass1_src10.ximg exists
[Thu Dec 22 22:28:33 2011] fullrun_pn_xmm0605540301_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu Dec 22 22:28:33 2011] Fit fullrun_pn_xmm0605540301_pi300-10000_cl_pass1_src10 appears to have run properly
[Thu Dec 22 22:28:34 2011] fullrun_pn_xmm0605540301_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu Dec 22 22:28:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605540301_pi300-10000_cl_pass1_tfrozen_src10.csv
[Thu Dec 22 22:28:34 2011] fullrun_pn_xmm0605540301_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu Dec 22 22:28:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605540301_pi300-10000_cl_pass1_tfrozen_src10.csv
[Thu Dec 22 22:28:34 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0605540301_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0605540301_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 04:14:06 2011] Source 12 is offset by -6.442821 and 6.472081 pixels which is larger than
2 X fitted extent = 6.537839 x 2.097591, not incorporating fit results
[Fri Dec 23 04:14:06 2011] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 22.036505 pixels away
[Fri Dec 23 04:14:06 2011] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 40.082272 pixels away
[Fri Dec 23 04:14:06 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 04:14:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 04:14:06 2011] Assessing source extent using major
[Fri Dec 23 04:14:06 2011] Source does appear to be extended
[Fri Dec 23 04:14:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 04:14:57 2011] Counts = 1030.253662, rescaling region sizes by 2.000000
[Fri Dec 23 04:14:57 2011] XMMSAS src. selection expression = ellipse(26076.924561, 29125.161041, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Dec 23 04:14:57 2011] Writing source region out to fullrun_pn_xmm0605540301_pi300-10000_pass1_cl_src12_src.reg
[Fri Dec 23 04:14:57 2011] Extracting stamp from image fullrun_pn_xmm0605540301_pi300-10000_cl_sm2.00.img.gz, (225, 260) - (375, 410)
[Fri Dec 23 04:14:57 2011] XMMSAS bgd. selection expression = annulus(26076.924561, 29125.161041, 4350.000000, 8700.000000, X, Y) && !ellipse(23967.643194, 21482.384627, 509.708917, 408.588373, 29.877513, X, Y) && !ellipse(26553.242400, 27810.120400, 3228.504093, 3228.504093, 0.000000, X, Y) && !ellipse(27290.886261, 37858.595825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33971.566559, 36940.476074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26658.094543, 34520.156677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18466.393265, 34229.659302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23230.587128, 33247.024994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30011.680634, 32919.107635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35297.198792, 32434.888702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25479.958000, 30754.770200, 549.968016, 549.968016, 0.000000, X, Y) && !ellipse(27163.052000, 29726.736000, 1349.528039, 1349.528039, 0.000000, X, Y) && !ellipse(28276.065000, 30159.352160, 1150.352033, 1150.352033, 0.000000, X, Y) && !ellipse(25123.546021, 29517.335419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24178.120000, 28474.444000, 1230.712035, 1230.712035, 0.000000, X, Y) && !ellipse(21078.688538, 28250.225342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31363.034940, 27414.460800, 461.273484, 461.273484, 0.000000, X, Y) && !ellipse(23069.886169, 27279.265198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28047.336200, 25512.455200, 398.500811, 398.500811, 0.000000, X, Y) && !ellipse(24332.147400, 23815.488800, 553.131216, 553.131216, 0.000000, X, Y) && !ellipse(22685.083800, 23299.853600, 411.720812, 411.720812, 0.000000, X, Y) && !ellipse(33652.849600, 21212.907400, 380.456811, 380.456811, 0.000000, X, Y) && !ellipse(27412.660200, 21245.112200, 640.970418, 436.488813, 344.496100, X, Y) && !ellipse(21605.563020, 20204.153200, 487.425743, 487.425743, 0.000000, X, Y)
[Fri Dec 23 04:14:57 2011] Writing fullrun_pn_xmm0605540301_pi300-10000_pass1_cl_src12.gif
[Fri Dec 23 04:57:59 2011] Mean detx,y = (249.04, -669.97) 
[Fri Dec 23 04:58:10 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 23 05:04:52 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 23 05:04:53 2011] Setting source spectrum file to fullrun_pn_xmm0605540301_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Dec 23 05:04:53 2011] Setting bgd. spectrum file to fullrun_pn_xmm0605540301_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Fri Dec 23 11:17:26 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Dec 23 11:17:26 2011] rmf not generated due to insufficient counts
[Fri Dec 23 19:36:18 2011] Updating aperture counts using extracted products
[Fri Dec 23 19:36:18 2011] Error reading totcts from fullrun_pn_xmm0605540301_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Dec 23 19:36:21 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 19:36:21 2011] Using photon index=1.80, rate=0.0262, arf fullrun_pn_xmm0605540301_pi300-10000_pass1_cl_src12.arf
[Fri Dec 23 19:36:21 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 23 19:36:21 2011] Updating source flux to 6.3e-14
[Fri Dec 23 19:43:42 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting