[Thu Dec 22 11:11:57 2011] Detection parameters:
  Position = (176.1, 400.2) = 10 24 17.62 4 16 59.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 518.4 +/- 30.0
  Background counts = 63.4
  Rate = 0.008 +/- 0.0005

[Thu Dec 22 11:12:01 2011] Off-axis axis estimate = 11.54'
[Thu Dec 22 17:30:05 2011] Using EEF radius (= 12.20 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 17:30:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Dec 22 17:30:05 2011] Initial guess for spatial extent in simple fitting = 12.20"
[Thu Dec 22 17:30:05 2011] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.962
[Thu Dec 22 17:30:05 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 12.20"
[Thu Dec 22 19:13:39 2011] fullrun_mos2_xmm0605540301_pi300-10000_cl_pass0_src4.ximg exists
[Thu Dec 22 19:13:39 2011] fullrun_mos2_xmm0605540301_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Dec 22 19:13:39 2011] Fit fullrun_mos2_xmm0605540301_pi300-10000_cl_pass0_src4 appears to have run properly
[Thu Dec 22 19:13:39 2011] fullrun_mos2_xmm0605540301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Dec 22 19:13:39 2011] fullrun_mos2_xmm0605540301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Dec 22 19:13:39 2011] Fit fullrun_mos2_xmm0605540301_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Thu Dec 22 19:14:18 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 15.266967 pixels away
[Thu Dec 22 19:14:18 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 19:14:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 19:14:18 2011] Assessing source extent using major
[Thu Dec 22 19:14:18 2011] Source does appear to be extended
[Thu Dec 22 19:14:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 02:04:28 2011] Using EEF radius (= 12.20 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 02:04:28 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 23 02:04:28 2011] Initial guess for spatial extent in simple fitting = 12.20"
[Fri Dec 23 02:04:28 2011] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.962
[Fri Dec 23 02:04:28 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 12.20"
[Fri Dec 23 04:13:48 2011] fullrun_mos2_xmm0605540301_pi300-10000_cl_pass1_src4.ximg exists
[Fri Dec 23 04:13:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605540301_pi300-10000_cl_pass1_src4.csv
[Fri Dec 23 04:13:48 2011] fullrun_mos2_xmm0605540301_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Dec 23 04:13:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605540301_pi300-10000_cl_pass1_src4.csv
[Fri Dec 23 04:13:48 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0605540301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0605540301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 04:13:49 2011] fullrun_mos2_xmm0605540301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Dec 23 04:13:49 2011] fullrun_mos2_xmm0605540301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Dec 23 04:13:49 2011] Fit fullrun_mos2_xmm0605540301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Dec 23 04:14:31 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 15.266967 pixels away
[Fri Dec 23 04:14:31 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 04:14:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 04:14:31 2011] Assessing source extent using major
[Fri Dec 23 04:14:31 2011] Source does appear to be extended
[Fri Dec 23 04:14:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 17:56:27 2011] XMMSAS src. selection expression = ellipse(15270.188019, 34771.651672, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Dec 23 17:56:27 2011] Writing source region out to fullrun_mos2_xmm0605540301_pi300-10000_pass1_cl_src5_src.reg
[Fri Dec 23 17:56:27 2011] Extracting stamp from image fullrun_mos2_xmm0605540301_pi300-10000_cl_sm2.00.img.gz, (139, 363) - (214, 438)
[Fri Dec 23 17:56:27 2011] XMMSAS bgd. selection expression = annulus(15270.188019, 34771.651672, 1087.500000, 2175.000000, X, Y)
[Fri Dec 23 17:56:27 2011] Writing fullrun_mos2_xmm0605540301_pi300-10000_pass1_cl_src5.gif
[Fri Dec 23 18:19:30 2011] Mean detx,y = (8286.49, 10255.15) 
[Fri Dec 23 18:19:34 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 23 18:19:49 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 23 18:19:50 2011] Setting source spectrum file to fullrun_mos2_xmm0605540301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Dec 23 18:19:50 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0605540301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Dec 23 18:44:04 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Dec 23 18:44:04 2011] rmf not generated due to insufficient counts
[Fri Dec 23 19:36:28 2011] Updating aperture counts using extracted products
[Fri Dec 23 19:36:28 2011] Error reading totcts from fullrun_mos2_xmm0605540301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Dec 23 19:36:30 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 19:36:30 2011] Using photon index=1.80, rate=0.00802, arf fullrun_mos2_xmm0605540301_pi300-10000_pass1_cl_src5.arf
[Fri Dec 23 19:36:30 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 23 19:36:30 2011] Updating source flux to 2.1e-13
[Fri Dec 23 19:40:39 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting