[Thu Dec 22 11:12:00 2011] Detection parameters:
  Position = (288.4, 339.8) = 10 23 44.97 4 12 36.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.0 +/- 18.9
  Background counts = 110.9
  Rate = 0.001 +/- 0.0003

[Thu Dec 22 11:12:01 2011] Off-axis axis estimate = 3.09'
[Thu Dec 22 17:30:05 2011] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 17:30:05 2011] Initial guess for spatial extent in simple fitting = 7.97"
[Thu Dec 22 17:30:05 2011] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.149
[Thu Dec 22 17:30:05 2011] Giving source the simple spatial ID 31 for pass 0, mean size = 7.97"
[Thu Dec 22 19:13:39 2011] fullrun_mos2_xmm0605540301_pi300-10000_cl_pass0_src31.ximg exists
[Thu Dec 22 19:13:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605540301_pi300-10000_cl_pass0_src31.csv
[Thu Dec 22 19:13:39 2011] fullrun_mos2_xmm0605540301_pi300-10000_cl_pass0_src31_1.ximg exists
[Thu Dec 22 19:13:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605540301_pi300-10000_cl_pass0_src31.csv
[Thu Dec 22 19:13:39 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0605540301_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0605540301_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 19:13:40 2011] fullrun_mos2_xmm0605540301_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Thu Dec 22 19:13:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605540301_pi300-10000_cl_pass0_tfrozen_src31.csv
[Thu Dec 22 19:13:40 2011] fullrun_mos2_xmm0605540301_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Thu Dec 22 19:13:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605540301_pi300-10000_cl_pass0_tfrozen_src31.csv
[Thu Dec 22 19:13:40 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0605540301_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0605540301_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 19:14:18 2011] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 11.282294 pixels away
[Thu Dec 22 19:14:18 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 19:14:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 19:14:18 2011] Assessing source extent using major
[Thu Dec 22 19:14:18 2011] Source does appear to be extended
[Thu Dec 22 19:14:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 02:04:28 2011] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 02:04:28 2011] Initial guess for spatial extent in simple fitting = 7.97"
[Fri Dec 23 02:04:28 2011] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.149
[Fri Dec 23 02:04:28 2011] Giving source the simple spatial ID 30 for pass 1, mean size = 7.97"
[Fri Dec 23 04:13:49 2011] fullrun_mos2_xmm0605540301_pi300-10000_cl_pass1_src30.ximg exists
[Fri Dec 23 04:13:49 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0605540301_pi300-10000_cl_pass1_src30.csv
[Fri Dec 23 04:13:49 2011] fullrun_mos2_xmm0605540301_pi300-10000_cl_pass1_src30_1.ximg exists
[Fri Dec 23 04:13:49 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0605540301_pi300-10000_cl_pass1_src30.csv
[Fri Dec 23 04:13:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0605540301_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0605540301_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 04:13:49 2011] fullrun_mos2_xmm0605540301_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Fri Dec 23 04:13:49 2011] fullrun_mos2_xmm0605540301_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Fri Dec 23 04:13:49 2011] Fit fullrun_mos2_xmm0605540301_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Fri Dec 23 04:14:31 2011] Spatial fit model total counts = 1138.280000, observed total counts = 1135.000000
[Fri Dec 23 04:14:31 2011] Offset between fit and detection position for source 25 = 7.598178 pixels
[Fri Dec 23 04:14:31 2011] 1132.572000 total counts/ 1031.380000 bgd. counts: snr = 3.150916
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 7.598178 pixels
  Position = (292.9, 333.7) = 10 23 43.66 4 12 8.6
  Extent = 15.9 (15.9-31.9)", rotation angle = 0
  Source counts = 101.2 +/- 33.7
  Background counts = 1031.4
  Rate = 0.002 +/- 0.0006
[Fri Dec 23 04:14:31 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 04:14:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 04:14:31 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 04:14:31 2011] Source does appear to be extended
[Fri Dec 23 04:14:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 17:56:28 2011] XMMSAS src. selection expression = ellipse(25431.506000, 28980.794000, 956.556028, 956.556028, 0.000000, X, Y)
[Fri Dec 23 17:56:28 2011] Writing source region out to fullrun_mos2_xmm0605540301_pi300-10000_pass1_cl_src25_src.reg
[Fri Dec 23 17:56:28 2011] Extracting stamp from image fullrun_mos2_xmm0605540301_pi300-10000_cl_sm2.00.img.gz, (238, 279) - (348, 389)
[Fri Dec 23 17:56:28 2011] XMMSAS bgd. selection expression = annulus(25431.506000, 28980.794000, 1594.260046, 3188.520092, X, Y) && !ellipse(26531.316258, 27787.080600, 2956.344085, 2956.344085, 0.000000, X, Y) && !ellipse(27256.769135, 28322.827118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28016.447357, 25733.385010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23097.571020, 27520.097540, 288.183208, 288.183208, 0.000000, X, Y) && !ellipse(26800.207642, 25816.312195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26621.914459, 29778.096466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24604.787811, 27423.032379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28000.110962, 30026.243469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25561.785156, 25979.538086, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Dec 23 17:56:28 2011] Writing fullrun_mos2_xmm0605540301_pi300-10000_pass1_cl_src25.gif
[Fri Dec 23 18:31:30 2011] Mean detx,y = (478.19, 1110.32) 
[Fri Dec 23 18:31:32 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 23 18:31:47 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 23 18:31:48 2011] Setting source spectrum file to fullrun_mos2_xmm0605540301_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Fri Dec 23 18:31:48 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0605540301_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Fri Dec 23 19:36:29 2011] Updating aperture counts using extracted products
[Fri Dec 23 19:36:30 2011] Error reading totcts from fullrun_mos2_xmm0605540301_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Fri Dec 23 19:36:31 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 19:36:31 2011] Using photon index=1.80, rate=0.0018, arf fullrun_mos2_xmm0605540301_pi300-10000_pass1_cl_src25.arf
[Fri Dec 23 19:36:31 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 23 19:36:31 2011] Updating source flux to 1.7e-14