[Thu Dec 22 11:11:58 2011] Detection parameters:
  Position = (142.1, 279.2) = 10 24 27.48 4 8 11.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 131.1 +/- 17.2
  Background counts = 55.0
  Rate = 0.002 +/- 0.0003

[Thu Dec 22 11:12:01 2011] Off-axis axis estimate = 11.42'
[Thu Dec 22 17:30:05 2011] Using EEF radius (= 12.14 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 17:30:05 2011] Initial guess for spatial extent in simple fitting = 12.14"
[Thu Dec 22 17:30:05 2011] source mask rpix=2.8, npix_max = 43, mask sum = 39, frac = 0.901
[Thu Dec 22 17:30:05 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 12.14"
[Thu Dec 22 19:13:39 2011] fullrun_mos2_xmm0605540301_pi300-10000_cl_pass0_src25.ximg exists
[Thu Dec 22 19:13:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605540301_pi300-10000_cl_pass0_src25.csv
[Thu Dec 22 19:13:39 2011] fullrun_mos2_xmm0605540301_pi300-10000_cl_pass0_src25_1.ximg exists
[Thu Dec 22 19:13:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605540301_pi300-10000_cl_pass0_src25.csv
[Thu Dec 22 19:13:39 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0605540301_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0605540301_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 19:13:40 2011] fullrun_mos2_xmm0605540301_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Thu Dec 22 19:13:40 2011] fullrun_mos2_xmm0605540301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Thu Dec 22 19:13:40 2011] Fit fullrun_mos2_xmm0605540301_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Thu Dec 22 19:14:18 2011] Source 10 is offset by 9.314853 and 3.081891 pixels which is larger than
2 X fitted extent = 1.479145 x 1.479145, not incorporating fit results
[Thu Dec 22 19:14:18 2011] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 12.353911 pixels away
[Thu Dec 22 19:14:18 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 19:14:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 19:14:18 2011] Assessing source extent using major
[Thu Dec 22 19:14:18 2011] Source does appear to be extended
[Thu Dec 22 19:14:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 02:04:28 2011] Using EEF radius (= 12.14 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 02:04:28 2011] Initial guess for spatial extent in simple fitting = 12.14"
[Fri Dec 23 02:04:28 2011] source mask rpix=2.8, npix_max = 43, mask sum = 39, frac = 0.901
[Fri Dec 23 02:04:28 2011] Giving source the simple spatial ID 24 for pass 1, mean size = 12.14"
[Fri Dec 23 04:13:49 2011] fullrun_mos2_xmm0605540301_pi300-10000_cl_pass1_src24.ximg exists
[Fri Dec 23 04:13:49 2011] fullrun_mos2_xmm0605540301_pi300-10000_cl_pass1_src24_1.ximg exists
[Fri Dec 23 04:13:49 2011] Fit fullrun_mos2_xmm0605540301_pi300-10000_cl_pass1_src24 appears to have run properly
[Fri Dec 23 04:13:49 2011] fullrun_mos2_xmm0605540301_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Fri Dec 23 04:13:49 2011] fullrun_mos2_xmm0605540301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Fri Dec 23 04:13:49 2011] Fit fullrun_mos2_xmm0605540301_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Fri Dec 23 04:14:31 2011] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 13.220469 pixels away
[Fri Dec 23 04:14:31 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 04:14:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 04:14:31 2011] Assessing source extent using major
[Fri Dec 23 04:14:31 2011] Source does appear to be extended
[Fri Dec 23 04:14:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 17:56:28 2011] XMMSAS src. selection expression = ellipse(12318.378220, 24246.138489, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Dec 23 17:56:28 2011] Writing source region out to fullrun_mos2_xmm0605540301_pi300-10000_pass1_cl_src10_src.reg
[Fri Dec 23 17:56:28 2011] Extracting stamp from image fullrun_mos2_xmm0605540301_pi300-10000_cl_sm2.00.img.gz, (105, 242) - (180, 317)
[Fri Dec 23 17:56:28 2011] XMMSAS bgd. selection expression = annulus(12318.378220, 24246.138489, 1087.500000, 2175.000000, X, Y) && !ellipse(10507.573864, 24984.663515, 646.767175, 251.855207, 84.456899, X, Y)
[Fri Dec 23 17:56:28 2011] Writing fullrun_mos2_xmm0605540301_pi300-10000_pass1_cl_src10.gif
[Fri Dec 23 18:29:19 2011] Mean detx,y = (14525.28, 1323.33) 
[Fri Dec 23 18:29:21 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 23 18:29:36 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 23 18:29:37 2011] Setting source spectrum file to fullrun_mos2_xmm0605540301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Dec 23 18:29:37 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0605540301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Dec 23 19:17:36 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Dec 23 19:17:36 2011] rmf not generated due to insufficient counts
[Fri Dec 23 19:36:29 2011] Updating aperture counts using extracted products
[Fri Dec 23 19:36:29 2011] Error reading totcts from fullrun_mos2_xmm0605540301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Dec 23 19:36:30 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 19:36:30 2011] Using photon index=1.80, rate=0.00203, arf fullrun_mos2_xmm0605540301_pi300-10000_pass1_cl_src10.arf
[Fri Dec 23 19:36:30 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 23 19:36:30 2011] Updating source flux to 5.8e-14
[Fri Dec 23 19:40:39 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting