[Thu Dec 22 11:11:04 2011] Detection parameters:
  Position = (297.9, 299.1) = 10 23 42.21 4 9 37.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 194.4 +/- 24.8
  Background counts = 107.6
  Rate = 0.003 +/- 0.0004

[Thu Dec 22 11:11:04 2011] Off-axis axis estimate = 0.07'
[Thu Dec 22 14:21:01 2011] Using EEF radius (= 6.46 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 14:21:01 2011] Initial guess for spatial extent in simple fitting = 6.46"
[Thu Dec 22 14:21:01 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.015
[Thu Dec 22 14:21:01 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 6.46"
[Thu Dec 22 17:30:04 2011] fullrun_mos1_xmm0605540301_pi300-10000_cl_pass0_src19.ximg exists
[Thu Dec 22 17:30:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605540301_pi300-10000_cl_pass0_src19.csv
[Thu Dec 22 17:30:04 2011] fullrun_mos1_xmm0605540301_pi300-10000_cl_pass0_src19_1.ximg exists
[Thu Dec 22 17:30:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605540301_pi300-10000_cl_pass0_src19.csv
[Thu Dec 22 17:30:04 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605540301_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605540301_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 17:30:04 2011] fullrun_mos1_xmm0605540301_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Thu Dec 22 17:30:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605540301_pi300-10000_cl_pass0_tfrozen_src19.csv
[Thu Dec 22 17:30:04 2011] fullrun_mos1_xmm0605540301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Thu Dec 22 17:30:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605540301_pi300-10000_cl_pass0_tfrozen_src19.csv
[Thu Dec 22 17:30:04 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605540301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605540301_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 19:14:08 2011] Source 34 is offset by 5.741663 and 5.075058 pixels which is larger than
2 X fitted extent = 2.586138 x 2.586138, not incorporating fit results
[Thu Dec 22 19:14:08 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 19:14:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 19:14:08 2011] Assessing source extent using major
[Thu Dec 22 19:14:08 2011] Source does appear to be extended
[Thu Dec 22 19:14:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 22:28:35 2011] Using EEF radius (= 6.46 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 22:28:35 2011] Initial guess for spatial extent in simple fitting = 6.46"
[Thu Dec 22 22:28:35 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.015
[Thu Dec 22 22:28:35 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 6.46"
[Fri Dec 23 02:04:27 2011] fullrun_mos1_xmm0605540301_pi300-10000_cl_pass1_src19.ximg exists
[Fri Dec 23 02:04:27 2011] fullrun_mos1_xmm0605540301_pi300-10000_cl_pass1_src19_1.ximg exists
[Fri Dec 23 02:04:27 2011] Fit fullrun_mos1_xmm0605540301_pi300-10000_cl_pass1_src19 appears to have run properly
[Fri Dec 23 02:04:28 2011] fullrun_mos1_xmm0605540301_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Fri Dec 23 02:04:28 2011] fullrun_mos1_xmm0605540301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Fri Dec 23 02:04:28 2011] Fit fullrun_mos1_xmm0605540301_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Fri Dec 23 04:14:20 2011] Source 34 is offset by -5.277762 and -6.796850 pixels which is larger than
2 X fitted extent = 4.037563 x 4.037563, not incorporating fit results
[Fri Dec 23 04:14:20 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 04:14:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 04:14:20 2011] Assessing source extent using major
[Fri Dec 23 04:14:20 2011] Source does appear to be extended
[Fri Dec 23 04:14:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 15:26:56 2011] XMMSAS src. selection expression = ellipse(25865.026672, 25977.114044, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Dec 23 15:26:56 2011] Writing source region out to fullrun_mos1_xmm0605540301_pi300-10000_pass1_cl_src34_src.reg
[Fri Dec 23 15:26:56 2011] Extracting stamp from image fullrun_mos1_xmm0605540301_pi300-10000_cl_sm2.00.img.gz, (260, 262) - (335, 337)
[Fri Dec 23 15:26:56 2011] XMMSAS bgd. selection expression = annulus(25865.026672, 25977.114044, 1087.500000, 2175.000000, X, Y) && !ellipse(26568.503180, 27756.677000, 2548.200073, 2548.200073, 0.000000, X, Y) && !ellipse(26764.132400, 28793.030000, 1197.096034, 892.872026, 359.321000, X, Y) && !ellipse(26903.732544, 25895.729431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28049.038460, 25507.927600, 396.434411, 396.434411, 0.000000, X, Y) && !ellipse(24402.540955, 27486.729187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24687.433563, 28568.215546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28816.657257, 28309.315674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28435.278229, 26222.072357, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Dec 23 15:26:56 2011] Writing fullrun_mos1_xmm0605540301_pi300-10000_pass1_cl_src34.gif
[Fri Dec 23 15:58:07 2011] Mean detx,y = (-1255.90, -1335.32) 
[Fri Dec 23 15:58:10 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 23 15:58:22 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 23 15:58:22 2011] Setting source spectrum file to fullrun_mos1_xmm0605540301_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Fri Dec 23 15:58:22 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0605540301_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Fri Dec 23 17:26:18 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Dec 23 17:26:18 2011] rmf not generated due to insufficient counts
[Fri Dec 23 19:36:25 2011] Updating aperture counts using extracted products
[Fri Dec 23 19:36:25 2011] Error reading totcts from fullrun_mos1_xmm0605540301_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Fri Dec 23 19:36:27 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 19:36:27 2011] Using photon index=1.80, rate=0.00325, arf fullrun_mos1_xmm0605540301_pi300-10000_pass1_cl_src34.arf
[Fri Dec 23 19:36:27 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 23 19:36:27 2011] Updating source flux to 3.2e-14
[Fri Dec 23 19:36:33 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting