[Thu Dec 22 11:11:02 2011] Detection parameters:
  Position = (306.2, 326.4) = 10 23 39.78 4 11 34.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5356.0 +/- 101.6
  Background counts = 109.8
  Rate = 0.09 +/- 0.002

[Thu Dec 22 11:11:04 2011] Off-axis axis estimate = 2.11'
[Thu Dec 22 14:21:01 2011] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 14:21:01 2011] Initial guess for spatial extent in simple fitting = 7.48"
[Thu Dec 22 14:21:01 2011] source mask rpix=1.7, npix_max = 19, mask sum = 17, frac = 0.862
[Thu Dec 22 14:21:01 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 7.48"
[Thu Dec 22 17:30:04 2011] fullrun_mos1_xmm0605540301_pi300-10000_cl_pass0_src2.ximg exists
[Thu Dec 22 17:30:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605540301_pi300-10000_cl_pass0_src2.csv
[Thu Dec 22 17:30:04 2011] fullrun_mos1_xmm0605540301_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Dec 22 17:30:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605540301_pi300-10000_cl_pass0_src2.csv
[Thu Dec 22 17:30:04 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605540301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605540301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 17:30:04 2011] fullrun_mos1_xmm0605540301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Dec 22 17:30:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605540301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Dec 22 17:30:04 2011] fullrun_mos1_xmm0605540301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Dec 22 17:30:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605540301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Dec 22 17:30:04 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605540301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605540301_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 19:14:07 2011] Warning, spatial fit 2 centroid is now closest to src. 22
[Thu Dec 22 19:14:08 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 19:14:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 19:14:08 2011] Assessing source extent using major
[Thu Dec 22 19:14:08 2011] Source does appear to be extended
[Thu Dec 22 19:14:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 19:14:08 2011] Source is confused with source 1
[Thu Dec 22 22:28:35 2011] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 22:28:35 2011] Initial guess for spatial extent in simple fitting = 7.48"
[Thu Dec 22 22:28:35 2011] source mask rpix=1.7, npix_max = 19, mask sum = 17, frac = 0.862
[Thu Dec 22 22:28:35 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 7.48"
[Fri Dec 23 02:04:27 2011] fullrun_mos1_xmm0605540301_pi300-10000_cl_pass1_src2.ximg exists
[Fri Dec 23 02:04:27 2011] fullrun_mos1_xmm0605540301_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Dec 23 02:04:27 2011] Fit fullrun_mos1_xmm0605540301_pi300-10000_cl_pass1_src2 appears to have run properly
[Fri Dec 23 02:04:28 2011] fullrun_mos1_xmm0605540301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Dec 23 02:04:28 2011] fullrun_mos1_xmm0605540301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Dec 23 02:04:28 2011] Fit fullrun_mos1_xmm0605540301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Dec 23 04:14:20 2011] Spatial fit model total counts = 56362.900000, observed total counts = 48847.000000
[Fri Dec 23 04:14:20 2011] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Dec 23 04:14:20 2011] Spatial fit model total counts = 30523.000000, observed total counts = 33224.000000
[Fri Dec 23 04:14:20 2011] Offset between fit and detection position for source 3 = 5.452105 pixels
[Fri Dec 23 04:14:20 2011] 25962.340000 total counts/ 20786.200000 bgd. counts: snr = 35.901985
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 5.452105 pixels
  Position = (308.2, 331.5) = 10 23 39.20 4 11 59.2
  Extent = 15.0 (15.0-29.9)" x 11.2 (11.2-11.2)", rotation angle = 359 (359-359) degrees
  Source counts = 5176.1 +/- 161.1
  Background counts = 20786.2
  Rate = 0.09 +/- 0.003
[Fri Dec 23 04:14:20 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 04:14:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 04:14:20 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 04:14:20 2011] Source does appear to be extended
[Fri Dec 23 04:14:20 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.34
[Fri Dec 23 15:26:56 2011] Counts = 5176.140000, rescaling region sizes by 2.000000
[Fri Dec 23 15:26:56 2011] XMMSAS src. selection expression = ellipse(26764.132400, 28793.030000, 1795.644052, 1339.308039, 359.321000, X, Y)
[Fri Dec 23 15:26:56 2011] Writing source region out to fullrun_mos1_xmm0605540301_pi300-10000_pass1_cl_src3_src.reg
[Fri Dec 23 15:26:56 2011] Extracting stamp from image fullrun_mos1_xmm0605540301_pi300-10000_cl_sm2.00.img.gz, (205, 228) - (411, 435)
[Fri Dec 23 15:26:56 2011] XMMSAS bgd. selection expression = annulus(26764.132400, 28793.030000, 5985.480172, 11970.960344, X, Y) && !ellipse(26568.503180, 27756.677000, 2548.200073, 2548.200073, 0.000000, X, Y) && !ellipse(23958.669380, 21481.631000, 405.656812, 405.656812, 0.000000, X, Y) && !ellipse(15270.839828, 34747.902435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37133.069244, 31820.599884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23233.569000, 33217.281800, 333.425610, 333.425610, 0.000000, X, Y) && !ellipse(16837.755814, 38914.259369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26903.732544, 25895.729431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21068.539400, 28301.185100, 327.100809, 327.100809, 0.000000, X, Y) && !ellipse(27382.347594, 21259.065491, 682.721620, 363.324578, 173.997423, X, Y) && !ellipse(23092.425050, 27522.597000, 336.509610, 336.509610, 0.000000, X, Y) && !ellipse(22651.265045, 40332.106079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28049.038460, 25507.927600, 396.434411, 396.434411, 0.000000, X, Y) && !ellipse(28621.278961, 40327.616425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24402.540955, 27486.729187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35267.127930, 32420.227631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26346.710052, 29810.466583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25865.026672, 25977.114044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25127.560425, 29366.800568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22707.907440, 23310.309692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27298.304600, 29479.998000, 1321.000038, 1321.000038, 0.000000, X, Y) && !ellipse(24687.433563, 28568.215546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27213.728455, 30105.466888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28816.657257, 28309.315674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25602.075226, 29609.117126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27663.392181, 30268.767120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21885.616000, 19842.762000, 1504.664043, 1504.664043, 0.000000, X, Y) && !ellipse(28995.346039, 27306.242950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25884.468000, 30485.168000, 1289.824037, 1289.824037, 0.000000, X, Y) && !ellipse(28435.278229, 26222.072357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20535.435028, 37441.580994, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Dec 23 15:26:56 2011] Writing fullrun_mos1_xmm0605540301_pi300-10000_pass1_cl_src3.gif
[Fri Dec 23 15:43:22 2011] Mean detx,y = (417.80, 100.29) 
[Fri Dec 23 15:43:26 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 23 15:49:21 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 23 15:49:21 2011] Setting source spectrum file to fullrun_mos1_xmm0605540301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Dec 23 15:49:21 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0605540301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Dec 23 19:36:24 2011] Updating aperture counts using extracted products
[Fri Dec 23 19:36:24 2011] Error reading totcts from fullrun_mos1_xmm0605540301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Dec 23 19:36:26 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 19:36:26 2011] Using photon index=1.80, rate=0.0916, arf fullrun_mos1_xmm0605540301_pi300-10000_pass1_cl_src3.arf
[Fri Dec 23 19:36:26 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 23 19:36:26 2011] Updating source flux to 7.5e-13
[Fri Dec 23 19:36:33 2011] Flag p found in src. 3 procflags, skipping spectral fitting
[Fri Dec 23 19:36:33 2011] Flag c found in src. 3 procflags, skipping spectral fitting