[Thu Dec 22 11:11:02 2011] Detection parameters:
  Position = (306.2, 319.5) = 10 23 39.78 4 11 8.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 28527.3 +/- 204.0
  Background counts = 110.3
  Rate = 0.5 +/- 0.003

[Thu Dec 22 11:11:04 2011] Off-axis axis estimate = 1.62'
[Thu Dec 22 14:21:01 2011] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 14:21:01 2011] Initial guess for spatial extent in simple fitting = 7.24"
[Thu Dec 22 14:21:01 2011] source mask rpix=1.7, npix_max = 18, mask sum = 19, frac = 1.014
[Thu Dec 22 14:21:01 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Thu Dec 22 17:30:04 2011] fullrun_mos1_xmm0605540301_pi300-10000_cl_pass0_src1.ximg exists
[Thu Dec 22 17:30:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605540301_pi300-10000_cl_pass0_src1.csv
[Thu Dec 22 17:30:04 2011] fullrun_mos1_xmm0605540301_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Dec 22 17:30:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605540301_pi300-10000_cl_pass0_src1.csv
[Thu Dec 22 17:30:04 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605540301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605540301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 17:30:04 2011] fullrun_mos1_xmm0605540301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Dec 22 17:30:04 2011] fullrun_mos1_xmm0605540301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Dec 22 17:30:04 2011] Fit fullrun_mos1_xmm0605540301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Dec 22 19:14:07 2011] Spatial fit model total counts = 41846.200000, observed total counts = 41846.000000
[Thu Dec 22 19:14:07 2011] Offset between fit and detection position for source 1 = 0.279784 pixels
[Thu Dec 22 19:14:07 2011] 42292.800000 total counts/ 18970.000000 bgd. counts: snr = 169.335113
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.279784 pixels
  Position = (305.9, 319.6) = 10 23 39.86 4 11 7.4
  Extent = 10.6 (10.4-10.8)", rotation angle = 0
  Source counts = 23322.8 +/- 205.7
  Background counts = 18970.0
  Rate = 0.4 +/- 0.004
[Thu Dec 22 19:14:08 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 19:14:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 19:14:08 2011] Assessing source extent using major axis lower bound
[Thu Dec 22 19:14:08 2011] Source does appear to be extended
[Thu Dec 22 19:14:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 19:14:08 2011] Source is confused with source 3
[Thu Dec 22 22:28:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec 22 22:28:35 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Dec 22 22:28:35 2011] Initial guess for spatial extent in simple fitting = 10.62"
[Thu Dec 22 22:28:35 2011] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.867
[Thu Dec 22 22:28:35 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 10.62"
[Fri Dec 23 02:04:26 2011] fullrun_mos1_xmm0605540301_pi300-10000_cl_pass1_src1.ximg exists
[Fri Dec 23 02:04:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605540301_pi300-10000_cl_pass1_src1.csv
[Fri Dec 23 02:04:27 2011] fullrun_mos1_xmm0605540301_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Dec 23 02:04:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605540301_pi300-10000_cl_pass1_src1.csv
[Fri Dec 23 02:04:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605540301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605540301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 02:04:27 2011] fullrun_mos1_xmm0605540301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Dec 23 02:04:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605540301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Dec 23 02:04:28 2011] fullrun_mos1_xmm0605540301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Dec 23 02:04:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605540301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Dec 23 02:04:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605540301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605540301_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 04:14:20 2011] Warning, spatial fit 1 centroid is now closest to src. 3
[Fri Dec 23 04:14:20 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 04:14:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 04:14:20 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 04:14:20 2011] Source does appear to be extended
[Fri Dec 23 04:14:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 15:26:56 2011] Counts = 23322.800000, rescaling region sizes by 3.000000
[Fri Dec 23 15:26:56 2011] XMMSAS src. selection expression = ellipse(26568.503180, 27756.677000, 1911.150055, 1911.150055, 0.000000, X, Y)
[Fri Dec 23 15:26:56 2011] Writing source region out to fullrun_mos1_xmm0605540301_pi300-10000_pass1_cl_src1_src.reg
[Fri Dec 23 15:26:56 2011] Extracting stamp from image fullrun_mos1_xmm0605540301_pi300-10000_cl_sm2.00.img.gz, (196, 210) - (416, 429)
[Fri Dec 23 15:26:56 2011] XMMSAS bgd. selection expression = annulus(26568.503180, 27756.677000, 9555.750275, 19111.500550, X, Y) && !ellipse(26764.132400, 28793.030000, 1197.096034, 892.872026, 359.321000, X, Y) && !ellipse(23958.669380, 21481.631000, 405.656812, 405.656812, 0.000000, X, Y) && !ellipse(15270.839828, 34747.902435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10500.970177, 24934.895569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37133.069244, 31820.599884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23233.569000, 33217.281800, 333.425610, 333.425610, 0.000000, X, Y) && !ellipse(16837.755814, 38914.259369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26903.732544, 25895.729431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21068.539400, 28301.185100, 327.100809, 327.100809, 0.000000, X, Y) && !ellipse(27382.347594, 21259.065491, 682.721620, 363.324578, 173.997423, X, Y) && !ellipse(23092.425050, 27522.597000, 336.509610, 336.509610, 0.000000, X, Y) && !ellipse(22651.265045, 40332.106079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28049.038460, 25507.927600, 396.434411, 396.434411, 0.000000, X, Y) && !ellipse(28621.278961, 40327.616425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24402.540955, 27486.729187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35267.127930, 32420.227631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26346.710052, 29810.466583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25865.026672, 25977.114044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41641.279785, 24124.782410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25127.560425, 29366.800568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22707.907440, 23310.309692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27298.304600, 29479.998000, 1321.000038, 1321.000038, 0.000000, X, Y) && !ellipse(24687.433563, 28568.215546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27213.728455, 30105.466888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28816.657257, 28309.315674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25602.075226, 29609.117126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27663.392181, 30268.767120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21885.616000, 19842.762000, 1504.664043, 1504.664043, 0.000000, X, Y) && !ellipse(28995.346039, 27306.242950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25884.468000, 30485.168000, 1289.824037, 1289.824037, 0.000000, X, Y) && !ellipse(28435.278229, 26222.072357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42352.041748, 24110.952362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20535.435028, 37441.580994, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Dec 23 15:26:56 2011] Writing fullrun_mos1_xmm0605540301_pi300-10000_pass1_cl_src1.gif
[Fri Dec 23 15:27:21 2011] Mean detx,y = (161.67, -45.75) 
[Fri Dec 23 15:27:27 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 23 15:43:01 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 23 15:43:01 2011] Setting source spectrum file to fullrun_mos1_xmm0605540301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Dec 23 15:43:01 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0605540301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Dec 23 19:36:23 2011] Updating aperture counts using extracted products
[Fri Dec 23 19:36:24 2011] Error reading totcts from fullrun_mos1_xmm0605540301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Dec 23 19:36:26 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 19:36:26 2011] Using photon index=1.80, rate=0.413, arf fullrun_mos1_xmm0605540301_pi300-10000_pass1_cl_src1.arf
[Fri Dec 23 19:36:26 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 23 19:36:26 2011] Updating source flux to 3.5e-12
[Fri Dec 23 19:36:33 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Fri Dec 23 19:40:39 2011] Reading fit data from xmm0605540301/analysis//spectral/fullrun_mos1_xmm0605540301_pi300-10000_pass1_cl_src1_pl.csv
[Fri Dec 23 19:40:39 2011] Spectral fit parameter nH value = 6.23032e+20
[Fri Dec 23 19:40:39 2011] Spectral fit parameter PhoIndex value = 1.8599
[Fri Dec 23 19:40:39 2011] Failed to get F(0.3-8.0) from xmm0605540301/analysis//spectral/fullrun_mos1_xmm0605540301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Dec 23 19:40:39 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 19:40:39 2011] Using Nh = 6.2e+20, photon index=1.86, rate=0.413, arf fullrun_mos1_xmm0605540301_pi300-10000_pass1_cl_src1.arf
[Fri Dec 23 19:40:39 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 23 19:40:39 2011] Updating source flux to 3.6e-12