[Mon Apr 30 01:41:12 2012] Detection parameters:
  Position = (268.0, 272.1) = 10 23 47.01 4 10 53.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 226.4 +/- 27.4
  Background counts = 150.9
  Rate = 0.002 +/- 0.0002

[Mon Apr 30 01:41:12 2012] Off-axis axis estimate = 2.92'
[Mon Apr 30 07:56:30 2012] Using EEF radius (= 7.89 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 07:56:30 2012] Initial guess for spatial extent in simple fitting = 7.89"
[Mon Apr 30 07:56:30 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.747
[Mon Apr 30 07:56:30 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 7.89"
[Mon Apr 30 11:15:22 2012] fullrun_mos2_xmm0605540201_pi300-10000_cl_pass0_src25.ximg exists
[Mon Apr 30 11:15:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605540201_pi300-10000_cl_pass0_src25.csv
[Mon Apr 30 11:15:22 2012] fullrun_mos2_xmm0605540201_pi300-10000_cl_pass0_src25_1.ximg exists
[Mon Apr 30 11:15:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605540201_pi300-10000_cl_pass0_src25.csv
[Mon Apr 30 11:15:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0605540201_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0605540201_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 11:15:23 2012] fullrun_mos2_xmm0605540201_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Mon Apr 30 11:15:23 2012] fullrun_mos2_xmm0605540201_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Mon Apr 30 11:15:23 2012] Fit fullrun_mos2_xmm0605540201_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Mon Apr 30 11:16:22 2012] Spatial fit model total counts = 2800.710000, observed total counts = 2797.000000
[Mon Apr 30 11:16:22 2012] Offset between fit and detection position for source 55 = 7.821316 pixels
[Mon Apr 30 11:16:22 2012] 2968.059000 total counts/ 2804.430000 bgd. counts: snr = 3.089854
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 7.821316 pixels
  Position = (260.7, 269.1) = 10 23 49.12 4 10 39.6
  Extent = 15.8 (15.7-31.6)", rotation angle = 0
  Source counts = 163.6 +/- 54.5
  Background counts = 2804.4
  Rate = 0.001 +/- 0.0005
[Mon Apr 30 11:16:22 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 11:16:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 11:16:22 2012] Assessing source extent using major axis lower bound
[Mon Apr 30 11:16:22 2012] Source does appear to be extended
[Mon Apr 30 11:16:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 16:49:21 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Apr 30 16:49:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Apr 30 16:49:21 2012] Initial guess for spatial extent in simple fitting = 15.78"
[Mon Apr 30 16:49:21 2012] source mask rpix=3.6, npix_max = 68, mask sum = 64, frac = 0.940
[Mon Apr 30 16:49:21 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 15.78"
[Mon Apr 30 18:42:52 2012] fullrun_mos2_xmm0605540201_pi300-10000_cl_pass1_src23.ximg exists
[Mon Apr 30 18:42:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605540201_pi300-10000_cl_pass1_src23.csv
[Mon Apr 30 18:42:52 2012] fullrun_mos2_xmm0605540201_pi300-10000_cl_pass1_src23_1.ximg exists
[Mon Apr 30 18:42:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605540201_pi300-10000_cl_pass1_src23.csv
[Mon Apr 30 18:42:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0605540201_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0605540201_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 18:42:52 2012] fullrun_mos2_xmm0605540201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Mon Apr 30 18:42:52 2012] fullrun_mos2_xmm0605540201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Mon Apr 30 18:42:52 2012] Fit fullrun_mos2_xmm0605540201_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Mon Apr 30 18:43:38 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 55 at 19.340828 pixels away
[Mon Apr 30 18:43:38 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 18:43:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 18:43:38 2012] Assessing source extent using major axis lower bound
[Mon Apr 30 18:43:38 2012] Source does appear to be extended
[Mon Apr 30 18:43:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  1 03:49:02 2012] XMMSAS src. selection expression = ellipse(22636.438000, 23366.806000, 946.590027, 946.590027, 0.000000, X, Y)
[Tue May  1 03:49:02 2012] Writing source region out to fullrun_mos2_xmm0605540201_pi300-10000_pass1_cl_src55_src.reg
[Tue May  1 03:49:02 2012] Extracting stamp from image fullrun_mos2_xmm0605540201_pi300-10000_cl_sm2.00.img.gz, (206, 215) - (315, 324)
[Tue May  1 03:49:02 2012] XMMSAS bgd. selection expression = annulus(22636.438000, 23366.806000, 1577.650045, 3155.300091, X, Y) && !ellipse(25380.376200, 23978.284800, 2742.336079, 2742.336079, 0.000000, X, Y) && !ellipse(25257.492000, 23825.491400, 3606.552104, 1881.914454, 339.707700, X, Y) && !ellipse(23370.906480, 22272.705800, 293.048008, 293.048008, 0.000000, X, Y) && !ellipse(25649.233856, 21515.823181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19895.130905, 24451.138611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25745.286000, 26119.624000, 1081.752031, 1081.752031, 0.000000, X, Y)
[Tue May  1 03:49:02 2012] Writing fullrun_mos2_xmm0605540201_pi300-10000_pass1_cl_src55.gif
[Tue May  1 04:27:35 2012] Mean detx,y = (-2661.75, -549.75) 
[Tue May  1 04:27:36 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  1 04:27:47 2012] Binned source spectrum to 10 counts/bin
[Tue May  1 04:27:47 2012] Setting source spectrum file to fullrun_mos2_xmm0605540201_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Tue May  1 04:27:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0605540201_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Tue May  1 05:49:20 2012] Updating aperture counts using extracted products
[Tue May  1 05:49:20 2012] Error reading totcts from fullrun_mos2_xmm0605540201_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Tue May  1 05:49:21 2012] Calculating source flux in energy range 0.30-8.00
[Tue May  1 05:49:21 2012] Using photon index=1.80, rate=0.00141, arf fullrun_mos2_xmm0605540201_pi300-10000_pass1_cl_src55.arf
[Tue May  1 05:49:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  1 05:49:21 2012] Updating source flux to 1.3e-14