[Sun Feb 19 09:41:04 2012] Detection parameters:
  Position = (206.2, 377.8) = 20 56 9.68 25 44 49.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.8 +/- 12.7
  Background counts = 7.1
  Rate = 0.005 +/- 0.0007

[Sun Feb 19 09:41:04 2012] Off-axis axis estimate = 8.83'
[Sun Feb 19 11:48:19 2012] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 11:48:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 19 11:48:19 2012] Initial guess for spatial extent in simple fitting = 10.84"
[Sun Feb 19 11:48:19 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.005
[Sun Feb 19 11:48:19 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.84"
[Sun Feb 19 12:38:56 2012] fullrun_mos2_xmm0605470401_pi300-10000_cl_pass0_src5.ximg exists
[Sun Feb 19 12:38:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605470401_pi300-10000_cl_pass0_src5.csv
[Sun Feb 19 12:38:56 2012] fullrun_mos2_xmm0605470401_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Feb 19 12:38:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605470401_pi300-10000_cl_pass0_src5.csv
[Sun Feb 19 12:38:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0605470401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0605470401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 12:38:56 2012] fullrun_mos2_xmm0605470401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Feb 19 12:38:56 2012] fullrun_mos2_xmm0605470401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Feb 19 12:38:56 2012] Fit fullrun_mos2_xmm0605470401_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Feb 19 12:39:23 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 14.851562 pixels away
[Sun Feb 19 12:39:23 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 12:39:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 12:39:23 2012] Assessing source extent using major
[Sun Feb 19 12:39:23 2012] Source does appear to be extended
[Sun Feb 19 12:39:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 14:33:11 2012] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 14:33:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 19 14:33:11 2012] Initial guess for spatial extent in simple fitting = 10.84"
[Sun Feb 19 14:33:11 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.005
[Sun Feb 19 14:33:11 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.84"
[Sun Feb 19 15:18:41 2012] fullrun_mos2_xmm0605470401_pi300-10000_cl_pass1_src5.ximg exists
[Sun Feb 19 15:18:41 2012] fullrun_mos2_xmm0605470401_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Feb 19 15:18:41 2012] Fit fullrun_mos2_xmm0605470401_pi300-10000_cl_pass1_src5 appears to have run properly
[Sun Feb 19 15:18:42 2012] fullrun_mos2_xmm0605470401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Feb 19 15:18:42 2012] fullrun_mos2_xmm0605470401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Feb 19 15:18:42 2012] Fit fullrun_mos2_xmm0605470401_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Feb 19 15:19:06 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 14.851562 pixels away
[Sun Feb 19 15:19:06 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 15:19:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 15:19:06 2012] Assessing source extent using major
[Sun Feb 19 15:19:06 2012] Source does appear to be extended
[Sun Feb 19 15:19:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 16:30:33 2012] XMMSAS src. selection expression = ellipse(17887.237122, 32821.768951, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Feb 19 16:30:33 2012] Writing source region out to fullrun_mos2_xmm0605470401_pi300-10000_pass1_cl_src7_src.reg
[Sun Feb 19 16:30:33 2012] Extracting stamp from image fullrun_mos2_xmm0605470401_pi300-10000_cl_sm2.00.img.gz, (169, 340) - (244, 415)
[Sun Feb 19 16:30:33 2012] XMMSAS bgd. selection expression = annulus(17887.237122, 32821.768951, 1087.500000, 2175.000000, X, Y)
[Sun Feb 19 16:30:33 2012] Writing fullrun_mos2_xmm0605470401_pi300-10000_pass1_cl_src7.gif
[Sun Feb 19 16:32:57 2012] Mean detx,y = (9989.76, 4211.30) 
[Sun Feb 19 16:32:59 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 19 16:33:17 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 19 16:33:17 2012] Setting source spectrum file to fullrun_mos2_xmm0605470401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Feb 19 16:33:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0605470401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun Feb 19 16:51:11 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Feb 19 16:51:11 2012] rmf not generated due to insufficient counts
[Sun Feb 19 17:01:24 2012] Updating aperture counts using extracted products
[Sun Feb 19 17:01:24 2012] Error reading totcts from fullrun_mos2_xmm0605470401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Feb 19 17:01:26 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 19 17:01:26 2012] Using photon index=1.80, rate=0.00537, arf fullrun_mos2_xmm0605470401_pi300-10000_pass1_cl_src7.arf
[Sun Feb 19 17:01:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 19 17:01:26 2012] Updating source flux to 1.2e-13
[Sun Feb 19 17:01:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting