[Sat Jun 16 18:34:07 2012] Detection parameters:
  Position = (428.0, 274.1) = 7 51 15.52 20 44 46.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 159.1 +/- 17.5
  Background counts = 32.6
  Rate = 0.009 +/- 0.0009

[Sat Jun 16 18:34:08 2012] Off-axis axis estimate = 9.55'
[Sat Jun 16 18:55:18 2012] Using EEF radius (= 11.21 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 18:55:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 16 18:55:18 2012] Initial guess for spatial extent in simple fitting = 11.21"
[Sat Jun 16 18:55:18 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.951
[Sat Jun 16 18:55:18 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 11.21"
[Sat Jun 16 19:10:19 2012] fullrun_mos2_xmm0605391501_pi300-10000_cl_pass0_src5.ximg exists
[Sat Jun 16 19:10:19 2012] fullrun_mos2_xmm0605391501_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Jun 16 19:10:19 2012] Fit fullrun_mos2_xmm0605391501_pi300-10000_cl_pass0_src5 appears to have run properly
[Sat Jun 16 19:10:19 2012] fullrun_mos2_xmm0605391501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Jun 16 19:10:19 2012] fullrun_mos2_xmm0605391501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Jun 16 19:10:19 2012] Fit fullrun_mos2_xmm0605391501_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Jun 16 19:10:25 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.004754 pixels away
[Sat Jun 16 19:10:25 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 19:10:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 19:10:25 2012] Assessing source extent using major
[Sat Jun 16 19:10:25 2012] Source does appear to be extended
[Sat Jun 16 19:10:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 19:28:58 2012] Using EEF radius (= 11.21 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 19:28:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 16 19:28:58 2012] Initial guess for spatial extent in simple fitting = 11.21"
[Sat Jun 16 19:28:58 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.951
[Sat Jun 16 19:28:58 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 11.21"
[Sat Jun 16 19:41:19 2012] fullrun_mos2_xmm0605391501_pi300-10000_cl_pass1_src5.ximg exists
[Sat Jun 16 19:41:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605391501_pi300-10000_cl_pass1_src5.csv
[Sat Jun 16 19:41:19 2012] fullrun_mos2_xmm0605391501_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Jun 16 19:41:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605391501_pi300-10000_cl_pass1_src5.csv
[Sat Jun 16 19:41:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0605391501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0605391501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 19:41:19 2012] fullrun_mos2_xmm0605391501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Jun 16 19:41:19 2012] fullrun_mos2_xmm0605391501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Jun 16 19:41:19 2012] Fit fullrun_mos2_xmm0605391501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Jun 16 19:41:25 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.207237 pixels away
[Sat Jun 16 19:41:25 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 19:41:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 19:41:25 2012] Assessing source extent using major
[Sat Jun 16 19:41:25 2012] Source does appear to be extended
[Sat Jun 16 19:41:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 20:11:52 2012] XMMSAS src. selection expression = ellipse(37184.927277, 23802.355652, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 16 20:11:52 2012] Writing source region out to fullrun_mos2_xmm0605391501_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun 16 20:11:52 2012] Extracting stamp from image fullrun_mos2_xmm0605391501_pi300-10000_cl_sm2.00.img.gz, (390, 237) - (465, 312)
[Sat Jun 16 20:11:52 2012] XMMSAS bgd. selection expression = annulus(37184.927277, 23802.355652, 1087.500000, 2175.000000, X, Y)
[Sat Jun 16 20:11:52 2012] Writing fullrun_mos2_xmm0605391501_pi300-10000_pass1_cl_src1.gif
[Sat Jun 16 20:12:49 2012] Mean detx,y = (11886.82, 2479.21) 
[Sat Jun 16 20:12:50 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 16 20:12:58 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 16 20:12:58 2012] Setting source spectrum file to fullrun_mos2_xmm0605391501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 16 20:12:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0605391501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun 16 20:19:17 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 16 20:19:17 2012] rmf not generated due to insufficient counts
[Sat Jun 16 20:20:50 2012] Updating aperture counts using extracted products
[Sat Jun 16 20:20:50 2012] Error reading totcts from fullrun_mos2_xmm0605391501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 16 20:20:50 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 20:20:50 2012] Using photon index=1.80, rate=0.00854, arf fullrun_mos2_xmm0605391501_pi300-10000_pass1_cl_src1.arf
[Sat Jun 16 20:20:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 20:20:50 2012] Updating source flux to 2e-13
[Sat Jun 16 20:21:10 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting