[Thu Feb 16 10:06:00 2012] Detection parameters:
  Position = (287.1, 277.9) = 17 18 24.12 -40 29 31.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 20748.1 +/- 172.4
  Background counts = 68.8
  Rate = 0.3 +/- 0.002

[Thu Feb 16 10:06:01 2012] Off-axis axis estimate = 1.70'
[Thu Feb 16 11:17:57 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 11:17:57 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Thu Feb 16 11:17:57 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Thu Feb 16 11:17:57 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Thu Feb 16 12:07:06 2012] fullrun_mos2_xmm0605160101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Feb 16 12:07:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605160101_pi300-10000_cl_pass0_src1.csv
[Thu Feb 16 12:07:06 2012] fullrun_mos2_xmm0605160101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Feb 16 12:07:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605160101_pi300-10000_cl_pass0_src1.csv
[Thu Feb 16 12:07:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0605160101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0605160101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 12:07:07 2012] fullrun_mos2_xmm0605160101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Feb 16 12:07:07 2012] fullrun_mos2_xmm0605160101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Feb 16 12:07:07 2012] Fit fullrun_mos2_xmm0605160101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Feb 16 12:07:22 2012] Spatial fit model total counts = 18325.200000, observed total counts = 18310.000000
[Thu Feb 16 12:07:22 2012] Offset between fit and detection position for source 1 = 0.086434 pixels
[Thu Feb 16 12:07:22 2012] 18400.350000 total counts/ 4211.750000 bgd. counts: snr = 218.629244
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.086434 pixels
  Position = (287.1, 277.8) = 17 18 24.12 -40 29 32.1
  Extent = 5.3 (5.2-5.4)", rotation angle = 0
  Source counts = 14188.6 +/- 135.6
  Background counts = 4211.8
  Rate = 0.2 +/- 0.002
[Thu Feb 16 12:07:22 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 12:07:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 12:07:22 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 12:07:22 2012] Source does appear to be extended
[Thu Feb 16 12:07:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 13:50:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 16 13:50:29 2012] Initial guess for spatial extent in simple fitting = 5.31"
[Thu Feb 16 13:50:29 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.014
[Thu Feb 16 13:50:29 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.31"
[Thu Feb 16 14:34:23 2012] fullrun_mos2_xmm0605160101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Feb 16 14:34:23 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0605160101_pi300-10000_cl_pass1_src1.csv
[Thu Feb 16 14:34:23 2012] fullrun_mos2_xmm0605160101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Feb 16 14:34:23 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0605160101_pi300-10000_cl_pass1_src1.csv
[Thu Feb 16 14:34:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0605160101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0605160101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 14:34:24 2012] fullrun_mos2_xmm0605160101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Feb 16 14:34:24 2012] fullrun_mos2_xmm0605160101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Feb 16 14:34:24 2012] Fit fullrun_mos2_xmm0605160101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Feb 16 14:34:33 2012] Spatial fit model total counts = 18298.000000, observed total counts = 18298.000000
[Thu Feb 16 14:34:33 2012] Offset between fit and detection position for source 1 = 0.010646 pixels
[Thu Feb 16 14:34:33 2012] 18443.630000 total counts/ 4237.930000 bgd. counts: snr = 218.215577
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.010646 pixels
  Position = (287.1, 277.8) = 17 18 24.12 -40 29 32.1
  Extent = 5.3 (5.2-5.4)", rotation angle = 0
  Source counts = 14205.7 +/- 135.8
  Background counts = 4237.9
  Rate = 0.2 +/- 0.002
[Thu Feb 16 14:34:33 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 14:34:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 14:34:33 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 14:34:33 2012] Source does appear to be extended
[Thu Feb 16 14:34:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 15:25:33 2012] Counts = 14205.700000, rescaling region sizes by 3.000000
[Thu Feb 16 15:25:33 2012] XMMSAS src. selection expression = ellipse(24925.357780, 24117.112200, 958.824028, 958.824028, 0.000000, X, Y)
[Thu Feb 16 15:25:33 2012] Writing source region out to fullrun_mos2_xmm0605160101_pi300-10000_pass1_cl_src1_src.reg
[Thu Feb 16 15:25:33 2012] Extracting stamp from image fullrun_mos2_xmm0605160101_pi300-10000_cl_sm2.00.img.gz, (232, 223) - (342, 333)
[Thu Feb 16 15:25:33 2012] XMMSAS bgd. selection expression = annulus(24925.357780, 24117.112200, 4794.120138, 9588.240276, X, Y) && !ellipse(16139.101540, 29806.255000, 464.863213, 464.863213, 0.000000, X, Y) && !ellipse(20439.727859, 32533.738098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14951.313690, 26231.330444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14972.470800, 29022.587000, 451.624813, 451.624813, 0.000000, X, Y) && !ellipse(27952.081482, 33855.517883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26681.627800, 21879.534800, 310.923209, 310.923209, 0.000000, X, Y) && !ellipse(19359.438919, 19084.476120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20829.414000, 17806.727800, 1352.992039, 416.660012, -0.000000, X, Y) && !ellipse(21923.733917, 19197.192734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32603.799011, 30737.881592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24176.178467, 24671.612244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25872.870400, 31688.843600, 1418.096041, 1049.152030, 158.845653, X, Y) && !ellipse(27616.785518, 25691.905000, 318.382409, 318.382409, 0.000000, X, Y) && !ellipse(34008.705109, 32384.607758, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb 16 15:25:33 2012] Writing fullrun_mos2_xmm0605160101_pi300-10000_pass1_cl_src1.gif
[Thu Feb 16 15:25:44 2012] Mean detx,y = (71.35, 80.20) 
[Thu Feb 16 15:25:46 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 15:29:20 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 15:29:20 2012] Setting source spectrum file to fullrun_mos2_xmm0605160101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Feb 16 15:29:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0605160101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Feb 16 16:10:12 2012] Updating aperture counts using extracted products
[Thu Feb 16 16:10:12 2012] Error reading totcts from fullrun_mos2_xmm0605160101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Feb 16 16:10:13 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 16:10:13 2012] Using photon index=1.80, rate=0.187, arf fullrun_mos2_xmm0605160101_pi300-10000_pass1_cl_src1.arf
[Thu Feb 16 16:10:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 16 16:10:13 2012] Updating source flux to 1.9e-12
[Thu Feb 16 16:15:47 2012] Reading fit data from xmm0605160101/analysis//spectral/fullrun_mos2_xmm0605160101_pi300-10000_pass1_cl_src1_pl.csv
[Thu Feb 16 16:15:47 2012] Spectral fit parameter nH value = 1.27096e+22
[Thu Feb 16 16:15:47 2012] Spectral fit parameter PhoIndex value = 2.41952
[Thu Feb 16 16:15:47 2012] Failed to get F(0.3-8.0) from xmm0605160101/analysis//spectral/fullrun_mos2_xmm0605160101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Feb 16 16:15:47 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 16:15:47 2012] Using Nh = 1.3e+22, photon index=2.42, rate=0.187, arf fullrun_mos2_xmm0605160101_pi300-10000_pass1_cl_src1.arf
[Thu Feb 16 16:15:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 16 16:15:47 2012] Updating source flux to 2.7e-12