[Sat May  4 17:11:18 2013] Detection parameters:
  Position = (253.3, 369.8) = 18 18 45.91 -13 50 8.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.3 +/- 22.5
  Background counts = 218.0
  Rate = 0.003 +/- 0.0007

[Sat May  4 17:11:19 2013] Off-axis axis estimate = 6.12'
[Sat May  4 17:12:45 2013] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Sat May  4 17:12:45 2013] Initial guess for spatial extent in simple fitting = 9.49"
[Sat May  4 17:12:45 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.869
[Sat May  4 17:12:45 2013] Giving source the simple spatial ID 95 for pass 0, mean size = 9.49"
[Sat May  4 17:12:48 2013] fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_src95.ximg exists
[Sat May  4 17:12:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_src95.csv
[Sat May  4 17:12:48 2013] fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_src95_1.ximg exists
[Sat May  4 17:12:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_src95.csv
[Sat May  4 17:12:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_src95_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_src95.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 17:12:49 2013] fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src95.ximg exists
[Sat May  4 17:12:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src95.csv
[Sat May  4 17:12:49 2013] fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src95_1.ximg exists
[Sat May  4 17:12:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src95.csv
[Sat May  4 17:12:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src95_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src95.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 17:13:13 2013] Source 97 is offset by -5.725669 and -0.196924 pixels which is larger than
2 X fitted extent = 1.129770 x 1.129770, not incorporating fit results
[Sat May  4 17:13:13 2013] Warning, spatial fit 95 centroid is now closest to src. 39
[Sat May  4 17:13:13 2013] Vigneting correction estimate = 1.000000
[Sat May  4 17:13:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 17:13:13 2013] Assessing source extent using major
[Sat May  4 17:13:13 2013] Source does appear to be extended
[Sat May  4 17:13:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 17:14:21 2013] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Sat May  4 17:14:21 2013] Initial guess for spatial extent in simple fitting = 9.49"
[Sat May  4 17:14:21 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.869
[Sat May  4 17:14:21 2013] Giving source the simple spatial ID 94 for pass 1, mean size = 9.49"
[Sat May  4 17:14:23 2013] fullrun_pn_xmm0605130101_pi300-10000_cl_pass1_src94.ximg exists
[Sat May  4 17:14:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605130101_pi300-10000_cl_pass1_src94.csv
[Sat May  4 17:14:23 2013] fullrun_pn_xmm0605130101_pi300-10000_cl_pass1_src94_1.ximg exists
[Sat May  4 17:14:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605130101_pi300-10000_cl_pass1_src94.csv
[Sat May  4 17:14:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0605130101_pi300-10000_cl_pass1_src94_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0605130101_pi300-10000_cl_pass1_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 17:14:24 2013] fullrun_pn_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src94.ximg exists
[Sat May  4 17:14:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src94.csv
[Sat May  4 17:14:24 2013] fullrun_pn_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src94_1.ximg exists
[Sat May  4 17:14:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src94.csv
[Sat May  4 17:14:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src94_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 17:14:48 2013] Source 97 is offset by -5.725669 and -0.196924 pixels which is larger than
2 X fitted extent = 1.129770 x 1.129770, not incorporating fit results
[Sat May  4 17:14:48 2013] Warning, spatial fit 94 centroid is now closest to src. 39
[Sat May  4 17:14:48 2013] Vigneting correction estimate = 1.000000
[Sat May  4 17:14:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 17:14:48 2013] Assessing source extent using major
[Sat May  4 17:14:48 2013] Source does appear to be extended
[Sat May  4 17:14:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 17:15:59 2013] XMMSAS src. selection expression = ellipse(21989.688828, 32121.045654, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May  4 17:15:59 2013] Not overwriting source region fullrun_pn_xmm0605130101_pi300-10000_pass1_cl_src97_src.reg
[Sat May  4 17:15:59 2013] Extracting stamp from image fullrun_pn_xmm0605130101_pi300-10000_cl_sm2.00.img.gz, (216, 332) - (291, 407)
[Sat May  4 17:15:59 2013] XMMSAS bgd. selection expression = annulus(21989.688828, 32121.045654, 1087.500000, 2175.000000, X, Y) && !ellipse(19668.197586, 32700.195160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23530.108200, 35283.380600, 1642.928047, 565.616016, 18.883300, X, Y) && !ellipse(18992.346603, 34122.555420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21299.890976, 33347.908142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19197.692600, 36132.165400, 1838.864053, 503.256014, 314.918300, X, Y) && !ellipse(22380.758000, 34230.642000, 748.460822, 268.717608, 105.479500, X, Y) && !ellipse(23764.802200, 33847.990400, 589.200017, 301.742409, 87.395710, X, Y) && !ellipse(21696.264282, 32901.287079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20844.252106, 31922.279541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24017.184692, 32515.152893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18968.483800, 35825.604000, 1814.496052, 815.040023, 303.260000, X, Y) && !ellipse(24289.354401, 35022.971436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19175.479904, 34644.688171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20699.322021, 34434.959442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20912.834167, 33776.809540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22982.673400, 33631.152000, 760.238422, 760.238422, 0.000000, X, Y) && !ellipse(23213.138275, 33135.704926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22301.580000, 33030.266000, 382.959211, 382.959211, 0.000000, X, Y) && !ellipse(18309.476000, 32814.000000, 1703.576049, 1703.576049, 0.000000, X, Y) && !ellipse(22868.460000, 32414.236000, 540.765616, 540.765616, 0.000000, X, Y) && !ellipse(24204.247437, 30958.976501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22052.243973, 30198.127411, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May  4 17:15:59 2013] Writing fullrun_pn_xmm0605130101_pi300-10000_pass1_cl_src97.gif
[Sat May  4 17:16:13 2013] ../../xmm0605130101/products/events/fullrun_pn_xmm0605130101_pi300-10000_pass1_cl_src97_src.evt and ../../xmm0605130101/products/events/fullrun_pn_xmm0605130101_pi300-10000_pass1_cl_src97_bgd.evt exist, delete to re-create
[Sat May  4 17:16:13 2013] Mean detx,y = (-5430.43, -4427.19) 
[Sat May  4 17:16:13 2013] ../../xmm0605130101/products/images/fullrun_pn_xmm0605130101_pi300-10000_pass1_cl_src97_src.img and ../../xmm0605130101/products/images/fullrun_pn_xmm0605130101_pi300-10000_pass1_cl_src97_bgd.img exist, delete to re-create
[Sat May  4 17:16:13 2013] ../../xmm0605130101/products/spectra/fullrun_pn_xmm0605130101_pi300-10000_pass1_cl_src97_src.pi and ../../xmm0605130101/products/spectra/fullrun_pn_xmm0605130101_pi300-10000_pass1_cl_src97_bgd.pi exist, delete to re-create
[Sat May  4 17:16:13 2013] Setting source spectrum file to fullrun_pn_xmm0605130101_pi300-10000_pass1_cl_src97_src.pi.gz
[Sat May  4 17:16:13 2013] Setting bgd. spectrum file to fullrun_pn_xmm0605130101_pi300-10000_pass1_cl_src97_bgd.pi.gz
[Sat May  4 17:16:13 2013] ../../xmm0605130101/products/lightcurves/fullrun_pn_xmm0605130101_pi300-10000_pass1_cl_src97_src.lc and ../../xmm0605130101/products/lightcurves/fullrun_pn_xmm0605130101_pi300-10000_pass1_cl_src97_bgd.lc exist, delete to re-create
[Sat May  4 17:16:42 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May  4 17:16:42 2013] rmf not generated due to insufficient counts